• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2012.10a
• /
• pp.407-408
• /
• 2012

• Journal of Electrical Engineering and Technology
• /
• v.6 no.3
• /
• pp.364-368
• /
• 2011

The super-speed tube train was introduced to increase the speed of ground transportation. It levitates magnetically and runs in a partial vacuum tube, which significantly reduces air resistance. However, strong magnetic force sufficient to propel the massive train can affect the infrastructure. The induced eddy current produces joule heat, and raises the inside temperature of the girder, which might lead to electrochemical corrosion on the girder, thereby weakening its durability. In this paper, the authors analyzed the magnetic flux and induced eddy current in the reinforced concrete girder by using three-dimensional FEM, particularly by varying the number of reinforcing steels of the upper flange of the girder to the condition of almost the same flexural strength and reinforcing steel amount.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.11 no.2
• /
• pp.182-189
• /
• 2003

We have found that the damage of the front part for a vehicle and that of the rear part for a vehicle are the majority of frequency experienced by the traffic accidents. In conventional bumper system was designed by safety standard regulation at low speed crash. For example there are 2.5 mile and 5 mile bumper. The conventional bumper system was the crash from max 5.5 mile to 3 mile low speed occurs most frequently and results in the highest rate of repairing cost in statistically. On this study, in order to check the damageability and repairability of gas tube bumper system RCAR 15 km/h 40 % offset frontal crash test was adopted in low speed and we have a gas tube bumper parts test and vehicle test with gas tube bumper, we can find gas tube bumper system definitely can improve the damageability and repairability of the vehicles and contribute to down the repairing cost.

• International Journal of Aeronautical and Space Sciences
• /
• v.18 no.4
• /
• pp.614-622
• /
• 2017

The characteristics of aerodynamic drag for Transonic Vehicle in Evacuated Tube was investigated using computational fluid dynamics. At first, parametric study on the system was performed according to the Mach number of the vehicle's speed ($Mach_v$), evacuated pressure of the tube ($Pre_t$), and blockage ratio (BR) between the vehicle and tube via axisymmetric flow analysis; the $Mach_v$ ranged from 0.3 to 1.0. The $Pre_t$ was 100, 1,000 and 10,000 Pa and the BR was 0.1, 0.2, and 0.4. In the calculations, the aerodynamic drag of the vehicle was larger when the BR and the pressure became larger. Concerning the $Mach_v$, the drag coefficient ($C_d$) became the maximum when the $Mach_v$ was near the Kantrowitz limit and decreased, which showed the typical transonic flow pattern. Then, three dimensional flow analysis was performed by changing the $Mach_v$ from 0.3 to 1.0 and setting the BR and the $Pre_t$ as 0.34 and 100 Pa, respectively by referring the Hyperloop Alpha documentation. From the calculations, the $C_d$ from three dimensional flow simulations were somewhat larger than those of axisymmetric ones because of the eccentricity of the vehicle inside the tube. However, the pattern of $C_d$ according to the $Mach_v$ was compatible with that of axisymmetric ones.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.10 no.3
• /
• pp.1-6
• /
• 2011

This study focused on the localization of swivel type tube couplers, which all depend on imports. In this study, a computer application analysis was performed using a finite element method as a preliminary study. In the major developments related to the objective of this study, the air brake system produced by car makers represents a different in the installation point of an air tank according to the type of cars or in the length and direction of its hoses and that leads to cause lots of problems. For solving such problems, the design of the major elements in a swivel type tube coupler was analyzed using a finite element method, and its validity was also verified. In the process that verifies the validity of this study, it was necessary to investigate how much external force affects the desorption of the tube support, which is the most important element in swivel type tube couplers. For achieving the investigation, a pressure test was implemented for the tube support according to the Federal Motor Vehicle Safety Standards(FMVSS). In the results of the pressure test, all samples satisfied the FMVSS. In addition, several tests were implemented by installing the sample of the developed swivel type tube coupler to an actual vehicle. In particular, rotation tests with various angles were applied by welding the swivel type coupler to an air tank through an argon welding process. In the results of the installing test for an actual vehicle, it was verified that the designed structure was determined as a structure that is able to endure the eccentric torque and deformation pressure applied to several directions that are the major problems in such fixed type tube couplers. Therefore, in the comparison of the performance of the developed product with the product of PARKER, it was possible to verify that the localized swivel type tube coupler developed in this study shows more excellent than that of the existing products by PARKER.

• Journal of the Korean Society for Railway
• /
• v.13 no.1
• /
• pp.51-57
• /
• 2010

The aerodynamic drag of ultra high-speed train in evacuated tube have been calculated using computational fluid dynamics and the variation of aerodynamic drag for the change of major system parameter of tube-vehicle system such as the train speed, air density, and the tunnel diameter. The aerodynamic drag in the tube increases with increasing train speed, however, the ratio of drag increase in tube is larger than that on the open field, the V square rule. The aerodynamic drag decreases with increasing tunnel diameter and increasing air density, and the drag increasing for air density is almost linear just like that on open field. For some combination of the parameters, the trend of aerodynamic drag of train showed irregularity.

• Proceedings of the KSR Conference
• /
• 2010.06a
• /
• pp.1951-1957
• /
• 2010

Study of Lunar exploration is progressed and manned lunar exploration is planned. In order to explore in Lunar, we need habitat to stay for a long time and system that mine, classify and transport materials. Lunar has dust that is very light-tiny. That is on the air for a long time so there are problems to adject transportation system such as vehicle. However, it can solve the problem to use pipe transportation system. This transportation system help materials move continually and is more effective than other transportation system such as train or vehicle. For those positive points, some experts studied about tube transportation systems. I introduce these system and find out factors that can be used in Lunar regolith transportation system. I suggest Lunar regolith transportation system, using the factors.

• Journal of Institute of Convergence Technology
• /
• v.3 no.1
• /
• pp.19-23
• /
• 2013

This study is concerned with air-conditioning system in use of thermoelectric device. It is introduced that the well designed structures for better cooling & heating performance with high efficiency. And also it is performed that the system performance test of four types trial products for the use of hybrid commercial vehicle. System performance is affected by many component parts, especially heat sink design & power control method. It is applied that dual extrusive fin tube with buffer zone for the effective radiating of circulating liquid in tube. And also it is applied that power supply method with constant-current system. It is attained that system cooling capacity is 1.2kW, COP is 0.95.

• Transactions of Materials Processing
• /
• v.25 no.3
• /
• pp.176-181
• /
• 2016

The exhaust tail pipe is the only visible part of the exhaust system on a vehicle. The conventional way to make the tail pipe is welding after stamping. There are various problems that occur during the stamping of stainless steel sheets such as scratching and local fracture. Problems during welding can also occur due to poor weldability. Tube hydroforming can be a solution, which eliminates these problems. The current study deals with the development of tube hydroforming for a vehicle tail pipe using finite element analysis for a free-feeding method. The current study focuses on the development of a proper load path for the tail pipe hydroforming and how bending influences the subsequent processing steps. The FE analysis results were compared with experimental results. This study shows the importance of bending and the necessity of considering bending when performing a tube hydroforming analysis.

• Transactions of Materials Processing
• /
• v.16 no.3 s.93
• /
• pp.201-209
• /
• 2007

Generally, the forming process of suspension system parts have been considered only considered with the formability and have not been considered with the durability of suspension system. But the durability of suspension system is very important characteristic for the dynamic performance of vehicle. Therefore, the suspension system should be manufactured to consider the durability as well as the formability. This paper is about an optimum forming process design with the effect of section properties to consider the roll durability of torsion beam type suspension. In order to determine the tube hydroforming process for the satisfaction the roll durability, the stamping and hydroforming simulation by finite element method were performed. And the results from finite element analysis and roll durability examination showed the tube hydroforming process of torsion beam is optimized as satisfying the durability performance.