• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1999년도 춘계학술대회 논문집
• /
• pp.73-76
• /
• 1999

We have fabricated and tested a Bi-based high temperature superconducting current lead system. Ag sheathed Bi-2223 mono-filament tapes of $I_c=8.4$ A at 77 K under self-field condition were fabricated using powder-in-tube(P1T) method. Multi-layer current leads can be made by stacking of Ag sheathed Bi-2223 mono-filament wires. The critical current of this 10-layer current lead is about 68 A. The contact resistance across the copper-current lead interface has been studied using current-voltage characteristics. At temperature below critical temperature the resistive contribution of the interface to the total contact resistance dominates. We have measured AC transport losses in a current lead at 77 K, 60 Hz by a transport method.

• 한국식품과학회지
• /
• 제22권2호
• /
• pp.177-182
• /
• 1990

역류분배방법을 이용한 단백질의 분리정제 효율을 높이기 위하여, 4가지 모델단백질에 대하여 수용성액체 2상계에서의 분획계수를 KCl 농도와 pH변화에 따라 조사하였다. 또한, 역류분배방법을 이용한 다중분배 추출방식으로 모델단백질의 혼합물을 KCl 농도(0, 50, 250, 500mM)와 pH(4.5, 5.5, 6.5, 9.0, 12.0)를 달리한 20가지 조건에서 분획하였다. 그 결과 KCl 농도와 pH에 따라 단백질들의 분획계수(K)값이 다르게 나타나서, KCl을 첨가함으로서 역류분배방법을 이용한 단백질 분리효율을 향상시킬 수 있는 가능성을 보여 주었다. 단백질에 따라 분리가 잘 일어나는 KCl 농도와 pH는 다르게 나타나서 myoglobin의 경우 KCl 50mM, pH5.5조건의 14번 튜브 상층부와 KCl 250mM, pH6.5조건의 13번 튜브의 상층부에서 잘 분리가 되었으며, BSA의 경우는 KCl 250mM, pH4.5 조건의 14번 튜브에서 분리되었고, lysozyme의 경우는 KCl 50MM, pH4.5조건의 19번 튜브와 KCl 50mM, pH5.5의 16번 튜브 상층부에서 분리가 되었다.

• 한국방사선학회논문지
• /
• 제18권3호
• /
• pp.213-222
• /
• 2024

본 연구는 폐 방사선 치료를 위한 컴퓨터 단층촬영의 관전압, 관전류 조건에 따라 딥 러닝과 아틀라스기반 자동분할 방법에 따른 생성된 볼륨과 Dice 유사도 계수와 95% 하우스도르프 거리를 분석하였다. 첫 번째 결과로 관전압 관전 류의 변화에 생성된 볼륨의 결과에서는 아틀라스기반인 smart segmentation 방법이 가장 적은 볼륨 변화를 보여주었으며, 딥 러닝을 사용한 Aview RT ACS와 OncoStudio에서는 100 mAs보다 낮은 관전류에서는 볼륨이 작아지는 걸 확인했다. 두 번째 결과인 Dice 유사도 계수에서는 Aview RT ACS가 OncoStuido 보다 2% 높은 결과를 보여주고 있으며, 95% 하우스도르프거리 결과에서도 Aview RT ACS가 OncoStudio 보다 평균 0.2~0.5% 높게 분석되었다. 하지만 관전류와 관전압에 따라 각각의 결과의 표준편차에서는 오히려 OncoStudio가 낮으므로 볼륨의 변화에서도 일관성 있을 거라 사료된다. 따라서 폐 방사선 치료를 위한 CT 촬영조건에서 낮은 관전압과 낮은 관전류에서 딥 러닝 기반 자동분할 프로그램을 사용할 때는 주의가 필요하며, 일정 관전압, 관전류 이상에서 기존에 사용하고 있는 아틀라스기반 자동분할 프로그램과 유사한 결과를 도출할 수 있었다.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2000년도 추계종합학술대회 논문집(4)
• /
• pp.239-242
• /
• 2000

The color television signal and color receivers should be balanced for the same value of reference white to achieve colorimetric fidelity and to minimize interference. The NTSC signal is balanced for white at 6774 K and most existing receivers are balanced between 6500 K and 10000 K for many reasons. In this paper, we analyze beam current ratio, lightness, and channel gain ratio according to the color temperature for the three-tube projection HDTV. We also propose the brighter reference white for the three-tube projection HDTV based on the Helmholtz-Kohlrausch effect and the optical resolution of the image. In computer simulation we confirmed the most suitable reference white using the proposed analysis method.

• Journal of Magnetics
• /
• 제15권2호
• /
• pp.70-73
• /
• 2010

A magnetic phase is partly produced in a steam generator tube due to stress and heat, because steam generator tubes are exposed to high temperature, high pressure and radioactivity conditions. This adversely affects the safety of steam generator tubes. However, it is difficult to detect it using conventional eddy current methods. Therefore, a new type of probe is needed to separate the signals from the defects and magnetic phases. In this study, a new U-type yoke, which contained two types of coils, a magnetizing coil and detecting coil, was designed. In addition, the signal induced by the magnetic phase and defect in an Inconel 600 plate were simulated.

• Journal of Welding and Joining
• /
• 제14권5호
• /
• pp.87-94
• /
• 1996

It has been well known in GMA welding process that wire feeding speed (WFS) or deposition rate increases linealy with the increase of wire extension. In this investigation, however, such an well-known relationship was .reconsidered in terms of contact-tube to work distance (CTWD) instead of wire extension. To verify the proposed relationship between WFS and CTWD, bead-on-plate welding was performed with various CTWDs in the range of 15∼35mm under the condition of near-constant voltage and current As expected, the test results showed an excellent linear relation between WFS and CTWD. Furthermore, the value of the slope turned out to be quite similar to those of previous investigators obtained either theoretically or experimentally through the Precise measurement of electrode extension. Present result also demonstred that the increase of CTWD could be very practical measure for increaring deposition rate without any increase of heat input Depending on the tip recess the practical maximum of CTWD was appeared to be limited somewhere in 25∼30mm mainly due to the entrappment of porocity.

• 대한방사선기술학회지:방사선기술과학
• /
• 제19권2호
• /
• pp.59-65
• /
• 1996

We studied exposure techniques and exposure dose for simple abdomen A-P projection for 41 medical facilities that are located in Seoul area. 1. The range of tube voltage used was 60 to 84 kVp, the average tube voltage used was 74 kVp 2. Only 17% of added filter was used. 3. Tube current mostly used was 200 mA, some of them used 400 mA. 4. The grid ratio mostly was used 10 : 1, 54 % of the rare earth screen was used in most facilities. 5. The average skin entrance dose was 4.15 mSv and the dose range was 1.05 mSv to 11.0 mSv.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2008년도 하계학술대회 논문집
• /
• pp.580-582
• /
• 2008

The object of this paper is develope the PC based controlled high voltage power supply and studies 1.2kW(120kV, 10mA) pulse power X-ray generator possible to adapt fluoroscopy of Dental CT X-ray generator and industrial X-ray pulse power equipment. The developed pulse power X-ray generator consisted of mono-block tank include X-ray tube and high voltage X-ray power supply circuit and high voltage control unit with RS232C/422 communication port. The PC control program of pulse power X-ray generator uses LabVIEW, and the size of high voltage transformer and high voltage generator is minimized by high voltage high frequency inverter has 100kHz switching frequency. Also this paper shows result of X-ray tube voltage and tube current correspond to variable load.

• 대한전기학회논문지
• /
• 제36권9호
• /
• pp.655-659
• /
• 1987

This study presents a model of the electrical characteristics of the high-pressure mercury vapour arc discharge. Energy balance equation per unit volume of the arc tube is converted into the one per unit length by assuming the parabolic radial temperature distribution and integrating over the cross-section of the tube. Using this energy balance equation, together with the circuit equation and Ohm's law, the arc voltage and current variation for 1 cycle is numerically calculated and a good result is obtained. A simple method to calculate the axis temperature of the arc tube and the radiation output is also presented.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2008년도 추계학술대회 논문집 Vol.21
• /
• pp.378-379
• /
• 2008

Recently, composite hollow bushings have been increasingly employed mainly from the various characteristics. Composite bushings are superior to porcelain bushings in several respects, including lighter weight, better anti-pollution and anti-explosion properties, and easer manufacturing. Filament wound GRP tubes which have various winding angle were manufactured by using a filament winding machine. This paper will show some design issues and winding condition for composite bushing. And, results show that the winding condition of composite GRP tubes can be used to improved their bending strength and pressure, For bending and pressure tested, tubes with the hybrid winding pattern show higher strength than those of unit winding pattern. Also, the influence of absorption was evaluated through such as measurement of the dye penetration test and water diffusion test, also aspects of surface state using scanning electron microscopy.