• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.6 no.3
• /
• pp.174-182
• /
• 2007

There are not many studies on the maintenance and replacement for the ITS equipments. Most of ITS center has no comprehensive regulation on the equipment replacement. This study was focusing on estimation of equipment replacement period and the number of spare parts in stock using the actual failure data of Road Side Equipment (RSE) by Dedicated Short Range Communication (DSRC). The failure data showed a type of bath-tub curves. The data, however, did not fit to any probability distribution curve, which means that the preventive replacement cannot be strongly applied for the RSE. In the aspect of practical strategy, this study suggest that repairing cost and failure frequency be used for decision of replacement of RSE after the 1 or 2 year warrant period. The future study needs to include more RSE failure data as well as other equipments of the ITS.

• Food Science and Preservation
• /
• v.15 no.1
• /
• pp.84-87
• /
• 2008

We used RT-PCR to measure housekeeping gene expression in mice fed GM and non-GM cabbage, in an effort to evaluate the risk of GM food to humans. After normalization of housekeeping gene levels, highly uniform expression may be seen in many organisms during various stages of development and under different environmental conditions. We assessed the expression of four genes in Chinese cabbage; these were Profilin, Tubulin-alpha (Tub-1), Heat-shock protein (Bchsp 17.6), and Ubiquitin conjugating enzyme (UBE). We measured the expression of four well-known housekeeping genes in mice: ${\beta}$-actin, (${\beta}$-act), ${\beta}$-2-microglobulin(B2m), Glyceraldehyde-3-phosphate dehydrogenase (GAPDH) and ${\beta}$-glucuronidase (Gus). Gene expression was measured in liver, stomach, small intestine, large intestine, kidney, and spleen of mice fed GM or non-GM cabbage. No significant expression differences were found.

• The Korean Journal of Food & Health Convergence
• /
• v.6 no.5
• /
• pp.11-17
• /
• 2020

This study tried to analyze sensual properties by classifying the thermal water extract of the main material used in Ssanghwa tea. Through this study, we wanted to develop popular Ssanghwa tea and further carry out basic research for the development of various menus using it. The ingredients for the Ssanghwa tea were washed under running water, then dehydrated and put in a pot as 2L of purified water. Ssangwha tea were heated at 100℃ for 10 minutes, then lowered the temperature to 75℃ and boiled down to 200 ml for 110 minutes. This study evaluated sensory characteristics of four types of commercial products and the five types manufactured by the description analysis. Quantitative analysis of the commercial Ssanghwa tea showed significant differences between samples in seven of the total 13 sensory characteristics except OG(Smell of grass), OC(Oriental medicine smell), TG(Umami), RT(Thick), RC(Rough) and RS(Tub-Tub) (p<0.05). In particular, differences between samples were evident in CT(Transmittance), CB(Brownness), TW(Sweet taste) and TB(Bitter) (p<0.001), which appeared to be the main differentiated features of appearance, aroma and taste for commercial Ssanghwa tea. This study tried to analyze sensual properties by classifying the thermal water extract of the main material used in Ssanghwa tea. Through, we wanted to develop popular Ssanghwa tea and further carry out basic research for the development of various menus using it.

• Journal of Wetlands Research
• /
• v.17 no.1
• /
• pp.53-61
• /
• 2015

Habitat creation for endangered species Menyanthes trifoliata L. using planting module represents a habitat type such as the rhizome grows horizontally to open water at the margin of the lake. The objectives of this mesocosm experiment are habitat creation with easy construction and low management effort, and to investigate the potential of providing a habitat for aquatic macroinvertebrates. Planting modules had three different substrates of bed soil, perlite and K-SOIL (artificial lightweight soil using bottom ash). These modules were established in two different size of the tub($1170{\times}2250{\times}300mm^3$, $900{\times}1360{\times}190mm^3$). According to the monitoring results, number of leaves and coverage of M. trifoliata showed significant difference with substrate and tub size. The number of leaves showed similar growth responses in bed soil (mean 22.979) and K-SOIL (mean 28.042) substrates but growth was poor in perlite substrate (mean 1.667). The number of leaves in the large tub was more than small tub (p=0.015). Similar responses were obtained with the coverage, the length of rhizome and the number of rhizome in M. trifoliata. A total of 21 taxa of aquatic macroinvertebrates including 1,145 individuals was found in the mesocosm. The Shannon diversity index and colonization index in the mesocosm were similar to the previous studies. These results suggest that the experimental mesocosm could provide sufficient habitats for aquatic macroinvertebrates. If planting modules use bed soil or K-SOIL by planting substrate, establish that taking into account open water surfaces for M. trifoliata growth and manage about 30cm of water depth control, then habitat creation for M. trifoilata will be successful.

• Journal of international Conference on Electrical Machines and Systems
• /
• v.3 no.2
• /
• pp.148-154
• /
• 2014

This paper describes problems of the sensorless starting of horizontal axis washing machines with direct drive and suggests solution, which was experimentally verified. Horizontal axis washing machines have very difficult conditions for the drive starting, especially at full load. Inertia of the tub and water, torque from the laundry make load torque at starting higher than rated one and sometimes even higher than the maximum torque of the motor, which makes sensorless starting extremely challenging task. This paper suggests modified open-loop starting, where control system is closed shortly after beginning at low speed and rotates the drum until laundry restructuring. To ensure proper work of the sensorless algorithm at low speed additional measures for increasing of the estimation algorithm performance have been taken. These measures include special algorithm for the drive parameters estimation, which has been developed and verified by the experimental results.

• Journal of the Korean Home Economics Association
• /
• v.37 no.10
• /
• pp.43-54
• /
• 1999

The purpose of this study is to clarify the transition and terminology of sanitary spaces in Korean houses, based on the analysis of novels. The resets are as follows. The sanitary space huts been developed in all aspects including locations and facility levels. Duikan, Pyunso, Tongsi, Whajangsil, and Yoksil were the terminology of sanitary space that appeared often in the novels. Before 1930, the word most frequently mentioned was Duikan. Whajangsil and Yoksil appeared shortly between 1930-1750. Duikan, Pyunso, and Tongsi were presented again between 1950-1970. Whajangsil and Yoksil were substituted for most other words after 1980. Other than the usual function of sanitary space, these areas also used as hiding spaces and places where one could observe others secretly. The sanitary spaces in most novels were located behind kitchens, nearby fences or stables and were typically unpleasant places with a messy dung tub, no lighting system, and a shed-like construction.

• Proceedings of the Korean Environmental Health Society Conference
• /
• 2004.06a
• /
• pp.197-201
• /
• 2004

This study was to determine the prevalence of Legionella species in public spas and to know that the presence of Legionella was correlated with other microbiological parameters. A total of 81 water samples were collected from 30 different public spas and sudatoriums so called zzimzilbang in Korea. Although Legionella was not detected in the influent water and the cold tub water, of the 38 samples of hot and warm water taken from public tubs, 11(28.8%) were found to be positive for Legionella spp. All of the isolates were identified as a species L. pneumophila serogroups 1 and 2-14 by latex agglutination. And HPC concentrations in all spas water isolated Legionella were above the level of $10^4\;cfu/ml$.

• Journal of the Korean Society for Aviation and Aeronautics
• /
• v.18 no.1
• /
• pp.89-99
• /
• 2010

The purpose of this study is analysis of Korean peninsula aircraft turbulence using the numerical weather prediction model, KWRF with the various turbulence index and pilot weather report data. Compared with the pilot weather report data and Calculated the turbulence index using the KWRF model result, many turbulence index show the similar horizontal distribution, except for the TUB2 and VWS. The analysis of vertical structure of turbulence, there are some difference each turbulence index respectively, but severe turbulence turn up in 15,000ft almost turbulence index. above 20,000ft height, intensity of turbulence vary each turbulence index. Through this turbulence study, It is founded on the research and development of the Korean peninsula aircraft turbulence

• Proceedings of the KSME Conference
• /
• 2003.11a
• /
• pp.205-209
• /
• 2003

The condensation water temperature $(T_{CW})$ distributions on the combi-drum washer of condensation type which the cloth washes, rinses, spins and dry cloth over a heater were measured using the thermocouples. During the drying process, in order to find out the relationship between the $T_{CW}$ distribution and the cloth dryness level $(C_{D1})$, the experiment was made for the dehydration rate of the cloth $(C_{D0})$ is 63%, the weight of cloth $(W_{C0})$ from 1 to 6kg. In result, according to $W_{C0}$ and $C_{D0}$, the distributions of $T_{CW}$ are very different. Using this tendency, it was appropriate and it developed the automatic drying algorithm and it was gotten dryness level regardless of $W_{C0}$, $C_{D0}$ and the other factor.

• 유체기계공업학회:학술대회논문집
• /
• 2005.12a
• /
• pp.525-532
• /
• 2005

Shape optimization of a transonic axial compressor rotor operating at the design flow condition has been performed using response surface method and three-dimensional Navier-Stokes analysis. Three design variables of blade sweep. lean and skew are introduced to optimize the three-dimensional stacking line of the rotor blade. The object function of the shape optimization is selected as an adiabatic efficiency. Throughout the shape optimization of the rotor. the adiabatic efficiency is increased by reducing the tub comer and tip losses. Separation line due to the interference between a passage shock and surface boundary layer on the blade suction surface is moved downstream for the optimized blade compared to the reference one.