• 한국근적외분광분석학회:학술대회논문집
• /
• 한국근적외분광분석학회 2001년도 NIR-2001
• /
• pp.1510-1510
• /
• 2001

NIRS uses reflectance signals resulting from bending and stretching vibrations in chemical bonds between carbon, nitrogen, hydrogen, sulfur and oxygen. These reflectance signals are used to measure the concentration of major chemical composition and other descriptors of homogenized and freeze-dried whole broiler carcasses. Six strains of chicken were analyzed and the NIRS model predictions compared to reference data. The results of this comparison indicate that NIRS is a rapid tool for predicting dry matter (DM), fat, crude protein (CP) and ash content in the broiler carcass. Males and females of six commercial strain crosses of broiler chicken (Gallus domesticus) were used in this study (6$\times$2 factorial design). Each strain was grown to 16 weeks of age, and duplicate serial samples were taken for body composition analysis. Each whole carcass was pressure-cooked, homogenized, and a representative sample was freeze-dried. Body composition determined as follows: DM by oven dried method at 105$^{\circ}C$ for 3 hours, fat by Mojonnier diethyl ether extraction, CP by measuring nitrogen content using an auto-analyzer with Kjeldhal digest and ash by combustion in a muffle furnace for 24 hour at 55$0^{\circ}C$. These homogenized and freeze-dried carcass samples were then scanned with a Foss NIR Systems 6500 visible-NIR spectrophotometer (400-2500nm) (Foss NIR Systems, Silver Spring, MD., US) using Infra-Soft-International, ISI, WinISl software (ISI, Port Matilda, US). The NIRS spectra were analyzed using principal component (PC) analysis. This data was corrected for scatter using standard normal “Variate” and “Detrend” technique. The accuracy of the NIRS calibration equations developed using Partial Least Squares (PLS) for predicting major chemical composition and carcass descriptors- such as body mass (BM), bird dry matter and moisture content was tested using cross validation. Discrimination analysis was also used for sex and strain identification. According to Dr John Shenk, the creator of the ISI software, the calibration equations with the correlation coefficient, $R^2$, between reference data and NIRS predicted results of above 0.90 is excellent and between 0.70 to 0.89 is a good quantifying guideline. The excellent calibration equations for DM ($R^2$= 0.99), fat (0.98) and CP (0.92) and a good quantifying guideline equation for ash (0.80) were developed in this study. The results of cross validation statistics for carcass descriptors, body composition using reference methods, inter-correlation between carcass descriptors and NIRS calibration, and the results of discrimination analysis for sex and strain identification will also be presented in the poster. The NIRS predicted daily gain and calculated daily gain from this experiment, and true daily gain (using data from another experiment with closely related broiler chicken from each of the six strains) will also be discussed in the paper.

• 한국자기학회:학술대회 개요집
• /
• 한국자기학회 2011년도 임시총회 및 하계학술연구발표회
• /
• pp.7-8
• /
• 2011

Basically, the lattice mismatch between film and substrate can make those BiFeO3(BFO) films distorted with strain structure. BFO phase can be stabilized on LaAlO3(LAO) represents the example of a multiferroic with giant axial ratio. Its crystal structure is not strictly tetragonal, but tetragonal with a slight monoclinic distortion and related to the rotation of the oxygen octahedra. In this study, we show that phases with a tetragonal-like epitaxial BFO films can indeed be ferroelectric and also can be stabilized via epitaxial growth onto LAO. Recent reports on epitaxial BFO films show that the crystal structure changes from nearly rhombohedral ("R-like") to nearly tetragonal("T-like") at strains exceeding approximately -4.5%, with the "T-like" structure being characterized by a highly enhanced c/a ratio. While both the "R-like" and the "T-like" phases are monoclinic, our detailed x-ray diffraction results reveal asymmetry change from MA and MC type, respectively. By applying additional strain or by modifying the unit cell volume of the film by substituting Ba for Bi, the monoclinic distortion in the "T-like" MC phase is reduced, i.e. the system approaches a true tetragonal symmetry. There are two different M-H loops for $Bi_{1-x}Ba_xFeO_{3-{\delta}}$(BBFO) and BFO films on SrTiO3(STO) & LAO substrates. Along with the ferroelectric characterization, these magnetic data indicate that the BFO phase stabilized on LAO represents the first example of a multiferroic with giant axial ratio. However, there is a significant difference between this phase and other predicted ferroelectrics with a giant axial ratio: its crystal structure is not strictly tetragonal, but tetragonal with a slight monoclinic distortion. Therefore, in going from bulk to highly-strained films, a phase sequence of rhombohedral(R)-to-monoclinic ["R-like" MA-to-monoclinic, "T-like" MC-to-tetragonal (T)] is observed. This sequence is otherwise seen only near morphotropic phase boundaries in lead-based solid-solution perovskites (i.e. near a compositionally induced phase instability), where it can be controlled by electric field, temperature, or composition. Our results show that this evolution can occur in a lead-free, stoichiometric material and can be induced by stress alone. Those major results are summarized as follows ; 1) Ba-doping increases the unit cell volume, 2) BBFO on LAO can be fully strained up to x=0.08 as a strain limit (Fig. 1), 3) P(E) & M(H) properties can be tuned by the variation of composition, strain, and film thickness.

• 한국추진공학회지
• /
• 제16권3호
• /
• pp.49-56
• /
• 2012

파열판은 고압장치에서 안전장치로써 사용하고 있으며, 추진기관에서는 파열을 임의로 제어하기 위한 장치로써 사용한다. 본 논문은 파열판의 파열압력 시험결과와 유한요소해석 결과를 비교하기 위한 것이다. 본 논문에서는 AISI 316L을 이용하여 제작한 파열판의 파열시험을 수행하였으며, 탄소성 물성치와 진 응력-변형률 관계의 다양한 가정을 이용하여 파열판의 파열압력을 계산하였다. 파열시험과 탄소성해석 결과를 통하여 파열판의 크기에 대한 파열압력의 변화를 확인하였다. 시험과 유한요소해석을 통해 파열압력은 파열판의 크기에 의존하며, 탄소성해석을 수행한 결과 다중 선형 응력-변형률 선도만이 의미있는 예측치를 계산할 수 있었다. 파열시험을 통하여 파열판의 크기에 따라 파열위치가 다르다는 것을 확인할 수 있었다. 시험과 해석 결과는 파열판의 크기 변화를 통하여 파열판의 파열압력을 제어하기 위해 사용할 수 있다.

• 한국버섯학회지
• /
• 제9권1호
• /
• pp.3-16
• /
• 2011

In the bipolar basidiomycete Pholiota nameko, a pair of homeodomain protein genes located at the A mating-type locus regulates mating compatibility. In the present study, we used a DNA-mediated transformation system in P. nameko to investigate the homeodomain proteins that control the clamp formation. When a single homeodomain protein gene (A3-hox1 or A3-hox2) from the A3 monokaryon strain was introduced into the A4 monokaryon strain, the transformants produced many pseudo-clamps but very few clamps. When two homeodomain protein genes (A3-hox1 and A3-hox2) were transformed either separately or together into the A4 monokaryon, the ratio of clamps to the clamp-like cells in the transformants was significantly increased to approximately 50%. We, therefore, concluded that the gene dosage of homeodomain protein genes is important for clamp formation. When the sip promoter was connected to the coding region of A3-hox1 and A3-hox2 and the fused fragments were introduced into NGW19-6 (A4), the transformants achieved more than 85% clamp formation and exhibited two nuclei per cell, similar to the dikaryon (NGW12-163 ${\times}$ NGW19-6). The results of real-time RT-PCR confirmed that sip promoter activity is greater than that of the native promoter of homeodomain protein genes in P. nameko. So, we concluded that nearly 100% clamp formation requires high expression levels of homeodomain protein genes and that altered expression of the A mating-type genes alone is sufficient to drive true clamp formation.

• 대한토목학회논문집
• /
• 제2권3호
• /
• pp.75-86
• /
• 1982

본 연구에서는 3절점, 6자유도를 갖는, 종래의 Timoshenko 보 이론에 근거한 깊은 보(Thick beam) 요소(DB6)와 3절점, 7자유도를 갖는 3차 축방향변위를 가정한 고차 보 요소(DB7)의 3차원 연속체로부터의 Degeneration을 보여 주고 있다. DB6 보 요소는 전단변형률의 비살제적인 선형분포를 보완하기 위하여 전단계수(shear coefficient)를 도입하고 있는 반면 고차 DB7 보 요소는 보다 실제적인 전단변형률의 2차분포를 가정하고 있다. 이 들 두 보 요소를 이용하여 계산된 해(解)는 Timoshenko 방정식의 해(解), 얕은 보(Thin beam)의 해(解) 및 다른 여러 보 요소들의 해(解)와 비교된다. 본 연구의 결과는 고차 DB7 보 요소가 보의 정력화적 해석이나 자유진동 해석에 있어서 다른 보 요소들에 비해 월등히 정확함을 보여주고 있다.

• 대한토목학회논문집
• /
• 제12권3호
• /
• pp.25-37
• /
• 1992

매우 큰 기하학적 변화를 나타낼 수 있는 비선형 유한요소의 정식화 과정을 나타내었다. 유한요소의 구성은 변화되는 재료의 기준 물성치에 근거를 두고 형성하였으므로 매우 큰 변형을 받는 재료의 특성들을 진응력 변형율 시험에 정확히 직접 적용할 수 있도록 하였다. 큰 변형 문제에 대하여 연속체 역학적인 접근방법으로 일관된 공식을 유도하였다. 운동학적인 문제는 변화되는 재료의 물성 기준치가 더욱 더 요구되므로, 물체 평형 방정식을 변화되는 기하학적 좌표로서 또한 형성하였으며, 이에 2차 Piola-Kirchhoff 응력과 변화되는 Largrangian 변형을 텐서들이 사용되었다. 수치해는 명확한 증분적인 수치과정으로 유도하였으며, 수치해의 증명을 위하여 뼈대구조와 평면구조들의 매우 큰 변형에 대한 예제들을 해석하였다. 또한 적절히 취급되는 재료 특성에 대한 중요성을 논증하였다.

• 한국식품과학회지
• /
• 제26권2호
• /
• pp.103-109
• /
• 1994

응력완화 현상을 측정하여 생선단백질 겔의 선형적 점탄성과 열처리 공정에 따른 물성의 변화를 수식적 모델로 분석하였다. 생선단백질 겔은 정변형도 $0.105{\sim}0.693$, 압축속도 $50{\sim}250\;mm/min$의 범위에서 선형적 점탄성을 나타내었으며, generalized Maxwell 모형에 의해 분석한 결과, 압축변형도과 압축속도가 증가함에 따라 가열에 의해 형성된 내부조직 중 탄성 성분의 증가와 점성성분의 감소현상을 보였다. $4^{\circ}C$와 $40^{\circ}C$에서 전처리하여 $90^{\circ}C$에서 제조한 겔은 전처리 없이 $90^{\circ}C$에서 직접 열처리한 겔보다 탄성율(E) 및 평형탄성율$(E_e)$이 높았으나, 점성성분$({\eta})$은 적용된 모델에 따라서 그 값의 차이가 나타났다. 따라서 식품의 물성을 측정하는데 있어서 두 수학적 모델의 접근방법 및 정확도에 대하여 설명하였다.

• 생명과학회지
• /
• 제12권4호
• /
• pp.392-398
• /
• 2002

Lignocellulose 분해 이용을 위해 토양 등에서 lignin분해 능력이 우수한 세균을 분리 및 동정함으로서 방향족 화합물의 이용을 위한 생물전환의 기초를 확보하고자하였다. 토양 등의 시료로부터 38주의 리그닌 분해 균주를 분리하였다. 분리된 LG2를 공시 균주로 선정하여 형태학적, 배양학적 및 생리학적 특성을 조사한 결과 Pseudomonas sp. LG2로 명명하였다. 이 균주는 리그닌을 분해 할 수 있었으며, 리그닌 함유 배지에 배양하여 배양 분해 산물을 HPLC로 분석한 결과 다수의 방향족 화합물을 생산하였다 Poylacrylamide gel활성 분석에 의해서 3종류로 구성된 peroxidase가 조사되었다.

• 대한기계학회논문집
• /
• 제15권2호
• /
• pp.445-454
• /
• 1991

In this thesis, Mindlin plate element with nine nodes and three degrees-of-freedom at each node is formulated and is employed in eigen-analysis of a rectangular plates in order to alleviate locking phenomenon of eigenvalues. Eigenvalues and their modes may be locked if conventional $C_{0}$-isoparametric element is used. In order to reduce stiffness locking phenomenon, two methods (1, the general reduced and selective integration, 2, the new element that use of modified shape function) are studied. Additionally in order to reduce the error due to mass matrix, two mass matrixes (1, Gauss-Legendre mass matrix, 2, Gauss-Lobatto mass matrix) are considered. The results of eigen-analysis for two models (the square plate with all edges simply-supported and all edges built-in), computed by two methods for stiffness matrix and by two mass matrixes are compared with theoretical solutions and conventional numerical solutions. These comparisons show that the performance of the two methods with Gauss-Lobatto mass matrix is better than that of the conventional plate element. But, by considering the spurious rigid body motions, the element which employs modified shape function with full integration and Gauss-Lobatto mass matrix can elevate the accuracy and convergence of numerical solutions.

• Geomechanics and Engineering
• /
• 제7권3호
• /
• pp.317-333
• /
• 2014

The study of the mechanical behavior of rockfill materials under three-dimensional loading conditions is a current research focus area. This paper presents a microscale numerical study of rockfill deformation and strength characteristics using the Combined Finite-Discrete Element Method (FDEM). Two features unique to this study are the consideration of irregular particle shapes and particle crushability. A polydisperse assembly of irregular polyhedra was prepared to reproduce the mechanical behavior of rockfill materials subjected to axial compression at a constant mean stress for a range of intermediate principal stress ratios in the interval [0, 1]. The simulation results, including the stress-strain characteristics, relationship between principal strains, and principal deviator strains are discussed. The stress-dilatancy behavior is described using a linear dilatancy equation with its material constants varying with the intermediate principal stress ratio. The failure surface in the principal stress space and its traces in the deviatoric and meridian plane are also presented. The modified Lade-Duncan criterion most closely describes the stress points at failure.