• 제목/요약/키워드: True resistance

검색결과 85건 처리시간 0.022초

'양생' 중재보진기 ('Health Preservation' Resistance Against Senile Involution)

  • 최훈;유희태
    • 동의생리병리학회지
    • /
    • 제16권3호
    • /
    • pp.421-423
    • /
    • 2002
  • Senile involution is divided into two classes : physiological senile involution and pathological senile involution. Physiological senile involution is a natural process of vital action of decreasing Vital Essence and Energy in kidney that is a necessary physiological phenomenon. Pathological senile involution is an evidence of impairment of True Qi of internal human body. Human vital action is a changing process of life, senility, sickness, and death. In other words, this is a natural process of being full and decreasing of Vital Essence and Energy in kidney, and True Qi of human body decides this process. The Vital Essence and Energy in kidney vary, and they are influenced and restricted by various elements. The time of a senile involution varies individually. Human body protects and makes efforts not to leak out True Qi in effective ways. We can postpone a limit of time of physiological senile involution phenomenon. This is called 'Health Preservation' - resistance against senile involution.

벼 아소미노리 교배조합 품종의 벼흰잎마름병 저항성 (Resistance of Varieties Bred by Crossing with Asominori to Bacterial Leaf Blight)

  • 심재성
    • 한국자원식물학회지
    • /
    • 제10권2호
    • /
    • pp.128-134
    • /
    • 1997
  • This study was conducted to test on the resistance of varieties bred by crossing with Asominori to bacterial leaf blight. Nakdongbyeo and Dongjinbyeo which were susceptible to HB 9011, 8 resistant varieties including Ilmibyeo derived from Asominori and Asominori, Hwangok, 13 varieties including Chukoku 45 which were resistance to HB 9011, HB 9022 and HB 9033 were used to screen their res ponce depending on the various screening methods such as the true resistance, the secondary infection resistance and the disease common field test methods, and the results are as follows: Among 13 varieties tested, 11 varieties including llmibyeo showed tme resistance to HB 9011. Less than 1.0cm of disease lesion were developed on these varieties. Disease lesion was not developed on most of the Asominori lines including Daechongbyeo against IIB9011 and 1lmibyeo was also resistance to HB 9011, on this variety disease lesion area rate was 1.2%, and 7 varieties including Hwajinbyeo showed field resistance to HB 9022. Disease lesion area rate were 19.6% on Nakdongbyeo. 15.6% on Dongjinbyeo, from 3.0% to 2.4% on Asominori lines, and 0.5% on the Asominori when screened at disease common area. Disease was not developed on Keumnambyeo. Significant correlation coefficiences were found between the results from the test methods of the true resistance, the field resistance ancl the field resistance at disease common field tests on Asominori lines, but in some cases, even the varieties on which disease lesions developed, showed field resistance to HB 9022 and HB 9033.

  • PDF

Screening of Pumpkin (Cucurbita spp.) Germplasm for Resistance to Powdery Mildew at Various Stages of Seedlings Growth

  • Luitel, Binod Prasad;Kim, Sang Gyu;Sung, Jung Sook;Hur, On-Sook;Yoon, Mun-Sup;Rhee, Ju-Hee;Baek, Hyung-Jin;Ryu, Kyoung-Yul;Ko, Ho-Cheol
    • 식물병연구
    • /
    • 제22권3호
    • /
    • pp.133-144
    • /
    • 2016
  • Powdery mildew (Podosphaera xanthii) causes severe damage to pumpkin crops grown in open fields and plastic house. Initially, we used ten accessions of pumpkin species; Cucurbita pepo (3), C. maxima (2), C. moschata (2), and C. argyrosperma (3) to study the disease progress in different stages of seedling development. Commercial pumpkin varieties were used as susceptible host for inoculum management and young seedlings were inoculated by dusting powdery mildew spores on the cotyledons, 1-true-leaf and 2-true-leaf seedling stages. Based on initial study, we further evaluated 218 pumpkinaccessions for their resistance to powdery mildew in different seedling stages under plastic house. Area under disease progress curve (AUDPC) and relative AUDPC (rAUDPC) was higher in cotyledonary and 1-true-leaf than 2-true-leaf stage. Seedlings at cotyledons and 1-true-leaf seedling stage displayed more susceptibility to powdery mildew. Based on evaluation of 2-true-leaf stage, IT 110859 and IT 278459 from C. pepo and C. argyrosperma identified as resistant (<0.2). Of the 228 pumpkin accessions, 21 (9.2%) pumpkin accessions consisting of C. pepo (2), C. maxima (5), C. moschata (13), and C. argyrosperma (1) exhibited intermediate resistance (<0.4) to powdery mildew and these accessions are useful to growers for its rational management.

변이율을 활용한 접지저항 측정 기술 (Ground Resistance Measurement Technology Utilizing the Variation Rate)

  • 이상무
    • 조명전기설비학회논문지
    • /
    • 제19권3호
    • /
    • pp.51-56
    • /
    • 2005
  • 접지의 성능을 결정하는 기본 요소인 접지저항을 측정하는 것은 성능평가를 위한 중요한 기술이 된다. 접지저항의 정확한 측정을 위하여는 측정 환경상 고려하여야 할 주요한 변수들이 있는데 실제의 측정 현장에서 이러한 변수들을 알고 측정하기는 곤란한 것이 현실이다. 본 논문에서는 3점전위강하법상의 전류전극에 이르기까지 나타나는 전위차 특성 곡선에 대하여 측정 환경 변수의 특성을 내포하고 있는 변이율이라는 개념을 도입하여 미지의 측정 환경 변수중에서도 가능한 접지저항의 참값에 근접한 측정을 지향하는 방법을 제의한 것이다. 이 이론은 이미 기검증된 논문들의 결과 내용을 분석함으로써 귀납적인 결론을 유도한 것이다.

내열용 오버레이 12%Cr계 스테인레스강의 열피로 특성에 미치는 Cr 함량과 델타-페라이트의 영향 (Effects of Cr Content and Volume Fraction of δ-Ferrite on Thermal Cycling Fatigue Properties of Overlay Welded Heat-Resistant 12%Cr Stainless Steels)

  • 정재영
    • 소성∙가공
    • /
    • 제26권6호
    • /
    • pp.356-364
    • /
    • 2017
  • In this study, submerged arc cladded Fe-Cr-Ni-Mo-CuWNbV-C stainless steels containing various Cr contents between 11.2 wt.% and 16.7 wt.% were prepared with fixed C content at about 0.14 wt.%. Using these alloys, changes in microstructure, tensile property, and thermal fatigue property were investigated. Phase fraction of delta-ferrite was increased gradually with increasing Cr content. However, tensile strength, hardness, and thermal fatigue resistance appeared to be decreased. When the microstructure of delta-ferrite was observed, it was revealed that the mesh structure retained up to about 15% Cr content. Although thermal fatigue resistance was almost the same for Cr contents between 11.0 and 14.5 wt.%, it was significantly decreased at higher Cr contents. This was evident from mean value of crack lengths of 10 largest ones. Evaluation of thermal fatigue resistance on alloys with various Cr contents revealed the following important results. First, the reproducibility of ranking test was excellent regardless of the number of cycles. Second, thermal fatigue resistance was increased in proportion to true tensile fracture strength values of overlay materials. Finally, the number of thermal fatigue cracks per unit length was increased with increasing true tensile fracture strength.

PHC 말뚝의 하중전이실험을 통한 참 지지력의 산정 (Determination of True Resistance from Load Transfer Test Performed on a PHC Pile)

  • 김성렬;정성교
    • 한국지반공학회논문집
    • /
    • 제22권11호
    • /
    • pp.113-122
    • /
    • 2006
  • 국내에서 말뚝 정재하 실험이 수많이 수행되고 있지만, 그 결과의 활용도가 낮아서 재하실험 방법과 분석방법 등에 대하여 재고할 필요성이 제기되고 있다. 본 연구에서는 두터운 연약지반 하부의 모래층에 PHC 말뚝 선단을 지지시킨 후 하중전이 정재하 실험을 수행하였다. 말뚝의 설치 이후에 장기간에 걸쳐 주면 마찰력을 측정하였으며, 국내에서 보편적으로 적용되고 있는 재하법과는 다른 급속재하법에 의하여 정재하실험을 실시하였다 그 실험결과를 이용하여 말뚝의 탄성계수, 잔류응력 및 참 지지력을 산정하였다. 결과적으로, 재하실험 전에 말뚝에 존재하는 잔류하중이 주면 마찰력과 선단지지력에 크게 영향을 미친다는 사실을 확인할 수 있었다. 또한, 점성토 지반에서의 장대말뚝에 대해서는 지반의 강도회복(setup) 효과가 매우 크다는 사실을 알 수 있었다.

잔류하중을 고려한 장대 PHC 말뚝의 양방향 재하시험 결과해석 (Analysis of a Bi-directional Load Test Result on tong PHC Piles in Consideration of Residual Load)

  • 김성렬;정성교;이봉열
    • 한국지반공학회논문집
    • /
    • 제24권6호
    • /
    • pp.85-93
    • /
    • 2008
  • 대심도 연약지반에 설치되는 말뚝은 말뚝의 길이가 길어져 지반지지력이 크므로 극한 지지력의 확인이 힘들고, 부마찰력에 의해 큰 잔류하중이 발생하기 때문에 하중전이시험을 수행하더라도 정확한 하중전이곡선을 산정하기 어렵다. 본 연구에서는 연약지반에 설치된 PHC 항타 말뚝을 대상으로 선단지지력과 주면마찰력을 분리측정할 수 있고 극한 지지력을 확인하기 용이한 하중전이 양방향 재하시험을 수행하였다. 말뚝설치 직후부터 말뚝변형률을 지속적으로 계측하여 잔류하중을 결정하였다. 잔류하중의 영향을 고려하여 참지지력과 참 하중-변위 곡선을 분석하였다. 이를 바탕으로 잔류하중이 포함된 주면마찰력에 대한 하중-변위 거동모형을 제안하였다. 결과적으로, 점토지반에 설치되는 장대말뚝의 재하실험 결과에 대한 정확한 분석을 위해서는 잔류하중을 고려하여야 한다는 것을 입증하였다.

Ultrasonographic Measurement of the Ligamentum Flavum Depth : Is It a Reliable Method to Distinguish True and False Loss of Resistance?

  • Pak, Michael Hae-Jin;Lee, Won-Hyung;Ko, Young-Kwon;So, Sang-Young;Kim, Hyun-Joong
    • The Korean Journal of Pain
    • /
    • 제25권2호
    • /
    • pp.99-104
    • /
    • 2012
  • Background: Previous studies have shown that if performed without radiographic guidance, the loss of resistance (LOR) technique can result in inaccurate needle placement in up to 30% of lumbar epidural blocks. To date, no study has shown the efficacy of measuring the depth of the posterior complex (ligamentum flavum, epidural space, and posterior dura) ultrasonographically to distinguish true and false LOR. Methods: 40 cervical epidural blocks were performed using the LOR technique and confirmed by epidurograms. Transverse ultrasound images of the C6/7 area were taken before each cervical epidural block, and the distances from the skin to the posterior complex, transverse process, and supraspinous ligament were measured on each ultrasound view. The number of LOR attempts was counted, and the depth of each LOR was measured with a standard ruler. Correlation of false and true positive LOR depth with ultrasonographically measured depth was also statistically analyzed. Results: 76.5% of all cases (26 out of 34) showed false positive LOR. Concordance correlation coefficients between the measured distances on ultrasound (skin to ligamentum flavum) and actual needle depth were 0.8285 on true LOR. Depth of the true positive LOR correlated with height and weight, with a mean of $5.64{\pm}1.06cm$, while the mean depth of the false positive LOR was $4.08{\pm}1.00cm$. Conclusions: Ultrasonographic measurement of the ligamentum flavum depth (or posterior complex) preceding cervical epidural block is beneficial in excluding false LOR and increasing success rates of cervical epidural blocks.

알루미늄-복합재료 혼성 사각관 보의 굽힘 성능평가 (Bending Performance Evaluation of Aluminum-Composite Hybrid Square Tube Beams)

  • 이성혁;최낙삼
    • 한국복합재료학회:학술대회논문집
    • /
    • 한국복합재료학회 2005년도 춘계학술발표대회 논문집
    • /
    • pp.76-79
    • /
    • 2005
  • Bending deformation and energy absorption characteristics of aluminum-composite hybrid tube beams have been analyzed for improvement in the bending performance of aluminum space frame by using experimental tests combined with theoretical and finite element analyses. Hybrid tube beams composed of glass fabric/epoxy layer wrapped around on aluminum tube were made in autoclave with the recommended curing cycle. Basic properties of aluminum material used for initial input data of the finite element simulation and theoretical analysis were obtained from the true stress-true strain curve of specimen which had bean extracted from the Al tube beam. A modified theoretical model was developed to predict the resistance to the collapse of hybrid tube beams subjected to a bending load. Theoretical moment-rotation angle curves of hybrid tube beams were in good agreement with experimental ones, which was comparable to the results obtained from finite element simulation. Hybrid tube beams strengthened by composite layer on the whole web and flange showed an excellent bending strength and energy absorption capability.

  • PDF

현장타설말뚝의 잔류응력 분포에 관한 연구 (A Study on the Distribution of Residual Stress for Drilled Shaft)

  • 김원철;황영철;안창윤
    • 한국지반환경공학회 논문집
    • /
    • 제6권1호
    • /
    • pp.45-51
    • /
    • 2005
  • 말뚝을 설계함에 있어 극한지지력을 산정하는 것만으로는 말뚝의 장기 거동에 있어서의 하중분포를 고려할 수 없으므로 재하시험시 변형률계나 응력계를 사용하여 말뚝의 하중 재하에 따른 주면저항(the shaft resistance)의 분포를 측정하고 있다. 그러나 대부분의 재하시험시 하중이 '0'일 때를 'zero time'으로 하여 계측기의 값을 읽는 'zero reading'을 가정함으로써 현장타설말뚝이나 항타말뚝의 시공시 발생된 잔류응력(the residual stress 또는 the residual load)을 무시하고 있다. 이러한 'zero reading'의 가정은 말뚝 시공시 발생하는 말뚝 하방향으로의 부주면마찰력인 잔류응력을 고려하지 않으므로 실제 말뚝주면의 하중분포와는 다른 결과를 보이게 된다. 본 연구에서는 현장에 시험시공된 현장타설말뚝에 대하여 정재하시험을 수행하였고, 말뚝 주면의 하중분포 측정시 변형률계를 사용하여 콘크리트 타설 직후부터 계측을 실시함으로써 말뚝 시공에 따른 잔류응력을 측정하였다. 그 결과, 잔류응력이 고려된 경우는 초기에 부의 응력상태를 보이나 하중이 재하됨에 따라 부주면마찰력이 극복되면서 양의 주면마찰력으로 전환됨을 알 수 있었으나, 'zero reading'의 경우는 양의 주면마찰력 만을 보였다.

  • PDF