• Nuclear Engineering and Technology
• /
• 제55권12호
• /
• pp.4472-4476
• /
• 2023

In this study, it has been shown that the true coincidence summing correction factor can be obtained for the first time using the PHITS Monte Carlo program. Determining this correction factor using different methods and tools in each laboratory to increase the possibility of achieving high-efficiency measurement conditions is still popular in gamma-ray spectrometry. By using ¹³³Ba, ¹⁵²Eu, ¹³⁴Cs, and ⁶⁰Co point sources, the true coincidence summing factor was investigated in both near and far counting geometries for 15 different energy values. GESPECOR software was used to validate the results obtained with PHITS. A remarkable agreement was obtained between PHITS and GESPECOR, with a discrepancy of less than 3%. With this study, a new tool has been proposed to obtain the true coincidence summing factor, which is one of the significant correction factors investigated/calculated in gamma-ray spectrometric studies.

• Journal of Radiation Protection and Research
• /
• 제43권4호
• /
• pp.137-142
• /
• 2018

Background: Gamma-ray detectors having a thin window of a material with low atomic number can increase the true coincidence summing effects for radionuclides emitting X-rays or gamma-rays. This effect can make efficiency calibration or spectrum analysis more complicated. In this study, a Cu shield was tested as an X-ray filter to neglect the true coincidence summing effect by X-rays and gamma-rays in gamma-ray spectrometry, in order to simplify gamma-ray energy spectrum analysis. Materials and Methods: A Cu shield was designed and applied to an n-type high-purity germanium detector having an $X-{\gamma}$ summing effect during efficiency calibration. This was tested using a commercial, certified mixed gamma-ray source. The feasibility of a Cu shield was evaluated by comparing efficiency calibration results with and without the shield. Results and Discussion: In this study, the thickness of a Cu shield needed to avoid true coincidence summing effects due to $X-{\gamma}$ was tested and determined to be 1 mm, considering the detection efficiency desired for higher energy. As a result, the accuracy of the detection efficiency calibration was improved by more than 13% by reducing $X-{\gamma}$ summing. Conclusion: The $X-{\gamma}$ summing effect should be considered, along with ${\gamma}-{\gamma}$ summing, when a detection efficiency calibration is implemented and appropriate shielding material can be useful for simplifying analysis of the gamma-ray energy spectra.

• Nuclear Engineering and Technology
• /
• 제48권3호
• /
• pp.778-784
• /
• 2016

HyperGam-U was recently developed to determine uranium enrichment based on ${\gamma}$- and X-ray spectroscopy analysis. The $XK_{\alpha}$ region of the uranium spectrum contains 13 peaks for $^{235}U$ and $^{238}U$ and is used mainly for analysis. To describe the X-ray peaks, a Lorentzian broadened shape function was used, and methods were developed to reduce the number of fitting parameters for decomposing the strongly overlapping peaks using channel-energy, energy-width, and energy-efficiency calibration functions. For validation, eight certified reference material uranium samples covering uranium enrichments from 1% to 99% were measured using a high-resolution planar high-purity germanium detector and analyzed using the HyperGam-U code. When corrections for the attenuation and true coincidence summing were performed for the detection geometry in this experiment, the goodness of fit was improved by a few percent. The enrichment bias in this study did not exceed 2% compared with the certified values for all measured samples.

• 대한방사선기술학회지:방사선기술과학
• /
• 제22권1호
• /
• pp.5-11
• /
• 1999

This paper reviews recent major activities on instrumentation and methodology of PET. The performance of the PET instrumentation can be expressed by four physical characteristics, 1) spatial resolution, 2) coincidence resolving time, 3) energy resolution, and 4) detection efficiency. The physical and technical aspects of PET systems are briefly discussed along with these characteristics. Toward high resolution PET the recent trend has been to design multiple rings of densely packed detector arrays with scintillators. In order to satisfy the sampling requirement in reconstruction, continuous detector units has been developed. Iterative image reconstruction algorithms have received considerable attention for improvement of both the sampling requirement and image quality toward the stationary PET. Better resolving time improves the maximum true coincidence rate, which is also increased with more detectors placed in coincidence with each other. It suggests that volume PET is promising for enhancement of detection efficiency. The scattered coincidence event rate may be reduced by using detectors with better energy resolution. The use of interplane septa, however, takes over improvement of energy resolution in 2D PET. Energy resolution becomes an important factor for image quality under the condition of septa removal such as volume PET. Toward full utilization of emitting photons, 3D reconstruction incorporating oblique rays has been studied, and volume reconstruction algorithms have been developed. Practical volume PET systems impose heavy burden not only to detector sets and coincidence circuits, but also to computers in the memory requirements and the data processing. In conclusion, there have been many ingenious methods in development of PET instrumentation, which are based on unique capability of PET. They will be expected to overcome technical limitations, and to approach the fundamental limits.

• 통합자연과학논문집
• /
• 제1권2호
• /
• pp.79-83
• /
• 2008

As a new standard for performance measurement, NEMA NU2-2001 was presented recently. In this study, I investigated the spatial resolution, sensitivity, scatter fraction, and noise equivalent count ratio (NECR) in order to know the information of physical characteristics and system performance of GE discovery ST using this new standard. Bismuth germinate crystals ($6{\times}6$ array, $6.3mm{\times}6.3mm{\times}30mm$) were used in discovery ST (energy window:375-650 keV, coincidence window:11.7 nsec). To measure the sensitivity, five aluminum sleeves (Data Spectrum Corp., Chapel Hill, NC., USA, thickness:1.25 mm)-NEMA sensitivity phantom- filled with F-18 solution were used. Successive measurements in 2D and 3D acquisition mode were made with a line source at the center of transaxial field of view and 10 cm off from the center until the count was over 500,000. Spatial resolution was estimated using a point source (F-18, 0.1 mCi) at different locations in the FOV. Scatter fraction and NECR was tested using a NEMA scatter phantom. Dynamic data were acquired for 7 half-lives using F-18 solution. And true to background ratio was averaged at last three frames when the random rate was as small as ignorable for the calculation of scatter fraction. We anticipate this overall evaluated results could be used for the quality assurance and optimized image acquisition for clinical research.

• Nuclear Engineering and Technology
• /
• 제51권2호
• /
• pp.526-532
• /
• 2019

In this study, an in-house $^{152}Eu$ calibration source was produced from a custom epoxy matrix with a density of ${\rho}=1.14g\;cm^{-3}$, which is chemically stable and durable form after its solidification. The homogeneity of $^{152}Eu$ in matrix was obtained better than 98%. For a Marinelli beaker geometry, an efficiency calibration procedure was applied to a n-type, coaxial, 78.5% relative efficient HPGe detector in the energy range of 121.7-1408.0 keV by using in-house $^{152}Eu$ calibration source. Then the measured efficiencies for Marinelli geometry were compared with the results calculated by MEFFTRAN and ANGLE softwares for the validation. Although MEFFTRAN and ANGLE have two different efficiency transfer algorithms to calculate the efficiencies, they usually need to use a reliable and accurate reference efficiency values as input data. Hence, reference efficiency values were obtained experimentally from a multinuclide standard source for the same detector-Marinelli geometry. In the present source characterization, the corrections required for self-absorption and true coincidence summing effects for $^{152}Eu$ gamma-rays were also obtained for a such close counting geometry condition. The experimental results confirmed the validity of efficiency calculations obtained by MEFFTRAN and ANGLE softwares that are calculation tools.

• Tuberculosis and Respiratory Diseases
• /
• 제47권5호
• /
• pp.642-649
• /
• 1999

연구배경: 비소세포폐암의 림프절의 병기 결정은 치료 및 예후 결정에 매우 중요하나 정확한 병기 결정에는 많은 어려움이 있다. 야에 저자들은 최근에 개발된 CoDe PET의 림프절 병기 결정에 대한 유용성을 알아보고자 하였다. 방 법: 1998년 2월부터 1999년 6월까지 아주대학교병원에 내원하여 원발성 비소세포폐암으로 진단되어 치료를 시행하였던 환자 21예를 대상으로 하였다. 수술적 술전 폐암의 병기 결정을 위하여 흉부 전산화단층촬영, 복부 초음파검사, 전신 골주사 촬영, CoDe PET를 시행하였다. 대상 환자들의 수술후 병리학적 병기를 기준으로 하여서 CoDe PET로 결정된 림프절 병기의 민감도, 특이도, 양성 예측도, 음성 예측도, 정확도를 분석하였다. 결 과: 21예의 비소세포폐암중 20예에서 원발 종괴에 $^{18}FDG$가 섭취되었으며 위음성이 1예가 있었다. 림프절 병기에 있어 전체 21예중 13예에서는 병리학적 병기와 일치하였다. 병리학적 N0는 14예이었으며 CoDe PET의 N0에 대한 특이도는 64.3%이었다. N1 림프절에 대한 민감도는 83.3%, 특이도는 73.3%, 양성 예측도는 55.6%, 음성 예측도는 91.7%, 정확도는 76.2%이였다. N2 림프절에 대한 민감도는 60.0%, 특이도는 87.5%, 양성 예측도는 60.0%, 음성 예측도는 87.5%, 정확도는 90.0%이었다. 병리학적으로 그 크기가 측정된 림프절 29개중 암세포의 침윤이 있었던 림프절은 6개이었으며 이중 3개의 림프절은 CoDe PET에 국소 섭취로 나타났다. 위음성으로 나타난 3개의 림프절은 그 크기가 모두 1cm 이하였으며, 양성으로 나타난 림프절의 크기는 각각 1.1cm, 1.0cm, 0.5cm이었다. 크기가 1cm 이상이나 암세포의 침윤이 없었던 12개의 림프절중 1예에서만 위양성으로 나타났다. 5예에서는 위양성 소견을 보였는데 이중 1예는 폐결핵에 의한 육이종을 관찰할 수 있었으며, 1예는 pneumoconiosis, 1예는 anthracosis이었다. 결 론: CoDe PET는 크기가 1.5cm 이상의 림프절에 대한 음성 예측도가 비교적 높기 때문에 N3 림프절의 확대가 있는 비소세포폐암에서 CoDe PET를 시행하여 국소 섭취가 없는 경우에는 수술적 치료를 고려해 볼 수 있으리라 생각된다. 또한 CoDe PET는 아직 개발 단계에 있어서 향후 보다 더 발전된 영상을 얻을 수 있을 것으로 기대된다.

• 대한핵의학회지
• /
• 제38권3호
• /
• pp.259-267
• /
• 2004

목적: 전신용 PET에 대한 표준 성능 평가 방법으로 NEMA NU2-2001이 확립되어 제안되었다. 따라서 새로이 설치되는 PET 스캐너뿐 아니라 기존에 사용 중인 스캐너에 대한 성능 평가가 이 표준 방법에 따라서 새로이 이루어 져야 한다. 이 연구에서는 NEMA NU2-2001 방법을 이용하여 CTI ECAT EXACT 47 PET 스캐너의 공간해상도, 민감도, 산란분획, NECR 등을 측정하였다. 대상 및 방법: 공간해상도를 평가하기 위하여 축 방향 시야의 정 가운데와 축 방향 시야 길이의 1/4을 벗어난 횡단면에 F-10을 채운 유리관(내경 1.1 mm)을 횡단면의 중심에서 1, 10 cm 떨어진 지점에 축 방향과 평행하게 위치시킨 후 PET 영상을 얻었다. 민감도를 측정하기 위하여 폴리에틸렌 및 알루미늄 관에 F-18을 채운 후 불응시간 손실이 1%를 넘지 않는 것을 확인한 후 영상을 획득하였다. 산란분획 및 최적 영상 획득 조건을 얻기 위하여 NECR을 NEMA 산란 팬텀을 이용하여 측정하였다. 결과: FBP재구성 방법(화소 크기: $0.515{\times}0.515mm^2$)으로 영상을 재 구성했을 때 스캐너의 중심에서 1cm 벗어난 지점에서 축방향, 횡축방향 공간 분해능은 0.62, 0.66 cm (FBP, 2D와 3D), 0.67, 0.69 cm (FBP, 2D와 3D)이었고 중심에서 10 cm 벗어난 지점에서 축방향, 횡축반경방향, 횡축접선방향 공간 분해능은 0.72, 0.68 mm (FBP, 2D와 3D), 0.63, 0.66 mm (FBP, 2D와 3D), 0.72, 0.66 mm (FBP, 2D와 3D)이었다. 민감도는 스캐너의 횡축방향 708.6 (2D), 2931.3 (3D) counts/sec/MBq, 횡축방향 중심에서 10cm 벗어난 지점에서 728.7 (2D), 3398.2 (3D) counts/sec/MBq 이었다. 산란 분획은 0.19 (2D), 0.49 (3D)이었고 최고 참 계수율과 NECR은 2차원 영상 획득 모드에서 40.1 kBq/mL 일 때 64.0 kcps, 40.1 kBq/mL 일 때 49.6 kcps, 3차원 영상 획득 모드에서 4.76 kBq/mL 일 때 53.7 kcps, 4.47 kBq/mL 일 때 26.4 kcps이었다. 결론: 이 실험에서 NEMA NU2-2001로 측정한 PET스캐너의 물리적 특성은 PET스캐너에 대한 객관적 평가 및 최적화 된 영상 획득과 분석에 유용할 것이다.

• 대중서사연구
• /
• 제25권1호
• /
• pp.281-313
• /
• 2019

이 글은 이애림 만화의 서사적 특성을 밝히기 위한 목적으로 작성되었다. 이애림은 한국의 문화 부흥기라고 불리는 1990년대에 만화잡지의 붐을 타고 등장한 작가다. 만화 작가로 시작했지만 점차 영역을 확장해 애니메이션 감독으로서도 활발한 활동을 이어가고 있다. 이애림 작업의 표면적인 특징은 섹슈얼리티, 그로테스크, 판타지 정도로 압축하여 소개할 수 있다. 달리 말하면 성적(性的)이고 기괴하며 환상적인 형태를 가시화하는 것이 이애림 만화의 주된 특징이다. 이애림은 내내 누구보다 압도적이고 강렬하게 이미지로 승부를 한 작가였다. 그래서 오히려 그녀의 그림 뒤에 숨겨진 이야기가 무엇인지 면밀히 주의를 기울이지 않은 것이 사실이다. 본고는 이애림이 초기부터 최근까지 관심을 두는 서사성 다시 말해 이야기의 맥락에 대해 짚어보는 것이 그녀의 과거와 현재 그리고 미래의 접점을 드러낼 수 있는 지름길이라 판단하였다. 특히 순환되고 반복되는 이야기, 운명과 우연이 지배하는 이야기, 환상적 요소와 위반의 시도가 만나는 이야기의 특징을 중점적으로 분석하였다. 결과적으로 이애림 만화 서사는 보편적이고 항상성을 지닌 인간의 가장 본질적인 측면을 예외성이나 특수성, 기괴함으로 포장하여 제시함으로써 우리에게 새로운 방식으로 억눌린 욕망을 직시하라고 요구하고 있음을 파악할 수 있었다. 이애림이 지금까지 전위적·전방위적 작업을 지속해 온 이유는 역으로 우리 사회가 무엇을 억압하고 있는지를 설명한다. 이애림의 서사는 억눌린 욕망을 드러내는 데 그치지 않고 그것을 해소할 수 있는 예술의 순기능을 성실히 담당한다는 점에서도 의미가 있다. 이애림 만화 서사의 여러 맥락을 따져 세밀히 살핀 이 연구는 개별 작가의 독창적 가치에 의미를 부여해 한국 만화의 다양성 확보에 나선 것에 의의를 두고자 한다.

• 복식
• /
• 제51권5호
• /
• pp.113-134
• /
• 2001

This study was carried out with an objective to prepare the framework of conformity for the 21st century modern fashion, which is interactive with mankind, based on a position that the 21st century contemporary fashion with its amalgamating trend of diversified artistic forms may not be elucidated on a standpoint centering on one certain modality. The hybrid fashion trend of historical modality which provides freedom and satisfaction in creation of an individuals expressive power in expressing true desire of mans inside through man-centered thought of the times has made multifarious motives of the past and present fragmentary. It thus extracts inner divisions and the concept of consolidation through three-dimensional form. Modern fashion is newly interpreted by the material and details of high technologies. and is harmonized by mix and match with various expressions. By having it, it is being expressed together with many types of dresses and ornaments. Modern fashion is being expressed together with many types of dresses and ornaments by new interpretations with the material and details of high technologies and by being harmonized with mix and match with various expressions. The hybrid fashion design trend of regional elements formed by stimuli and contacts of diverse local culture by globalization of network that was achieved by scientific technologies of the contemporary information society has disintegrated varied boundaries in the conventional culture by the latest communication technology-new media on the basis of newly created culture. The fact that regional elements could be expressed as if they were interrelated without each being deprived of originality may be explained with an interpretation on pluralism. The hybrid fashion design trend of cultural aspect, which manifests in the background of scientific technological culture as it transcends the societal-cultural boundaries based on the de-centralization theory of Frederic Jameson, has supplemented the imperfect meanings through conversional correlation with other forms and internal program changes. The middle stratal and polyhedral characteristics are seen as each cultural element is dismantled and reassembled by application of 'multiple-time point expression'. Design forming method is not to bring destruction from outside, but to embrace instability and chaos through radical dismantling of the inside. and to pursue diversity and openness. Thus. it is implemented by an approach that takes the role of design process. In communication of discontinuity, continuity was dismantled through forms of mixing, overlap, perversion, insertion and coincidence.