• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2007년도 추계학술대회논문집
• /
• pp.1183-1186
• /
• 2007

The low frequency noise, including infra-sound is known to affect human physiology and psychology. Guidelines and measurement method of low frequency noise has been introduced in several countries in order to evaluate low frequency noise. In this work, low frequency noise characteristics of dump truck was investigated in terms of the noise level and spectrum. The interior sound pressure level of the dump truck was between 60 and 105 dB in the frequency range of $1{\sim}250$ Hz.

• 산업경영시스템학회지
• /
• 제32권1호
• /
• pp.34-43
• /
• 2009

In this thesis, we explain developing processes of the power transmission system for lift truck. Conventional power transmission system had some problems such as spatial constraints or low speed and high torque problem. Because conventional power transmission system was mainly designed for high speed vehicles. In this paper we developed power shift drive axle specialized for $2.0{\sim}3.5$ ton lift truck. Innovative structure of transmission which is built in inside axle, enables to reduce system weight and size by 40% compared to the conventional power transmission system. Also, it is possible to do additional functions such as auto parking system and anti-roll back system.

• 한국안전학회지
• /
• 제24권4호
• /
• pp.53-58
• /
• 2009

The importance of process for repair and reinforcement of the bridge is increasing because of the lack of the fatigue load and stress, a lowering of the bridge load carrying capacity owing to impact and oscillation, deterioration on cultivation periods of the bridge, etc. Typically the experimenter values the bridge load carrying capacity by the real rating factor and response modification factor in bridge load rating through static load test and dynamic load test. But the error occurred in reliability of response modification factor in bridge load rating according to experience of experimenter. so tests of connecting probability theory and valuation of the bridge recently. The study is to compute the real load carrying capacity of the bridge and the rating factor and response modification factor on grade of the bridge, and calculate the probability of over-loaded truck load from Weigh In Motion(WIM) Data in FORTRAN programming applying to Monte-Carlo Simulation. At the result of this study, it is acquired that the new grade is computed for the probability of over-loaded truck load and surface inspection. The A grade is over 1.95, B grade is $1.55{\sim}1.94$, C grade is $1.26{\sim}1.54$, D grade is $1.14{\sim}1.25$, E grade is under 1.13 of rating factor, respectively.

• 한국도로학회논문집
• /
• 제8권1호
• /
• pp.89-98
• /
• 2006

오르막차로 설계에 쓰이는 표준트럭의 중량/마력비는 200 lb/hp로 알려져 있다. 그 값은 일반적으로 다양하기 마련인 지역간 트럭의 분포를 일정하다고 간주하여 트럭의 성능을 한가지로 표준화시킨 값이다. 또한 실제 교통량 중에서 트럭구성비를 측정하기보다는 그동안 전국범위의 트럭 등록대수 기준으로 표준트럭화 시킨 값이다. 따라서 표준트럭의 중량마력비는 지역적 산업적 트럭의 다양성이나 실제 트럭분포와 거리가 있다고 할 수 있다. 이러한 문제를 해결하기 위하여 본 논문에서는 실제 트럭 구성비에 지역특성을 반영한 다양한 표준트럭의 중량마력비에 대해 검토하였다. 본 논문을 위해 전국에 걸쳐 고속도로 요금소에서 측정한 개별트럭의 중량마력비를 사용하였다. 지역적 분석을 위해 전국 8개 지역으로 나누고, 지역별 중량/마력비를 특성화하여 현재 단일기준의 지역별 적용성을 검토하였다. 분석결과 전국의 표준트럭은 208 lb/hp로 현재의 200 lb/hp와 8 lb/hp 차이가 나며, 지역별로 분석한 결과 170 lb/hp $\sim$ 230 lb로 현재 기준과 30 lb/hp 내외의 차이가 나는 것으로 나타났다. 그 결과로 지역별 트럭분포의 격차가 있음을 확인할 수 있었고 전국적인 지역특성을 반영한 세가지의 중력마력비가 제안될 수 있었다. 다양한 표준트럭이 설계에 반영이 되면 두가지 효과가 기대된다. 즉 트럭과 승용차의 오르막차로에서의 속도차 때문에 발생하는 추돌사고를 줄이고 또한 특정지역에서 오르막차로 건설비를 줄이는 것이 가능할 것으로 생각된다.

• 대한교통학회지
• /
• 제25권5호
• /
• pp.79-90
• /
• 2007

도로의 최대종단경사는 차량의 등판능력에 좌우된다. 과거에 비해 차량의 성능이 좋아질수록 도로의 최대종단경사는 조정될 수 있다. 하지만, 미국(AASHTO, 1990, 2004)에서는 설계기준트럭이 300lb/hp에서 200lb/hp로 성능이 상승했음에도 불구하고, 적용되는 최대 종단경사는 거의 변화가 없다. 따라서, 현재 차량의 성능을 고려한 최대종단경사의 검토 및 조정의 검토가 필요한 실정이다. 특히 국내의 지형은 산악지가 많고, 험준한 지역이 많으므로 실정에 맞도록 최대종단경사의 검토가 필요하다. 본 연구에서는 차량의 성능의 개선과 도로 설계자가 당면한 결정의 문제를 인식하고 세계 각국의 지형과 최대종단경사 적용기준을 비교하여 우리나라의 최대종단경사의 적정성을 확인한다. 또한, 교통시뮬레이션 프로그램을 이용하여 차량의 성능향상에 따른 새로운 트럭 성능곡선을 토대로 최대종단경사를 판단한 결과 $1{\sim}2%$ 정도 종단경사 완화가 가능한 것으로 판단한다.

• 한국자동차공학회논문집
• /
• 제14권2호
• /
• pp.194-201
• /
• 2006

Roof-fairing and deflector system have been used on heavy-duty trucks to minimize aerodynamic drag force not only for driving stability of the truck but also for energy saving by reducing the required driving power of the vehicle. In this study, a numerical simulation was carried out to see aerodynamic effect of the drag reducing device on the model vehicle. Drag and lift force generated on the five different models of the drag reducing system were calculated and compared them each other to see which type of device is efficient on the reduction of driving power of the vehicles quantitatively. An experiment has been done to see airflow characteristics on the model vehicles. Airflow patterns around the model vehicles were visualized by smoke generation method to compare the complexity of airflow around drag reducing device. From the results, the deflector systems(Model 5,6) were revealed as a better device for reduction of aerodynamic drag than the roof-fairing systems(Model 2,3,4) on the heavy-duty truck and it can be expected that over 10% of brake power of an engine can be saved on a tractor-trailer by the aerodynamic drag reducing device at normal speed range($80km/h{\sim}$).

• 제어로봇시스템학회논문지
• /
• 제17권4호
• /
• pp.313-320
• /
• 2011

Multi-axle driving vehicles that are used in special environments require high driving performance, steering performance, and stability. Among these vehicles, 6WS/6WD vehicles with middle wheels have structural safety by distributing the load and reducing the pitch angle during rapid acceleration and braking. 6WS/6WD vehicles are favored for military use in off road operations because of their high maneuverability and mobility on extreme terrains and obstacles. 6WD vehicles that using in-wheel motor can generate the independent wheel torque without other mechanical parts. Conventional vehicles, however, cannot generate an opposite driving force at each side wheel. Using an independent steering and driving system, six-wheel vehicles can show better performance than conventional vehicles. Using of independent steering and driving system, the 6 wheel vehicle can improve a performance better than conventional vehicle. This vehicle enhances the maneuverability under low speed and the stability at high speed. This paper describes an independent 6WS/6WD vehicle, consists of three parts; Vehicle Model, Control Algorithm for 6WS/6WD and Simulation. First, vehicle model is application of TruckSim software for 6WS and 6WD. Second, control algorithm describes the optimum tire force distribution method in view of energy saving. Last is simulation and verification.

• Wind and Structures
• /
• 제14권1호
• /
• pp.55-70
• /
• 2011

This study investigates the design criteria required for wind barriers to protect vehicles running on an expressway under a high side wind. At the first stage of this study, the lateral deviations of vehicles in crosswinds were computed from the commercial software, CarSim and TruckSim, and the critical wind speeds for a car accident were then evaluated from a predefined car accident index. The critical wind speeds for driving stability were found to be 35 m/s for a small passenger car, yet 30 m/s for a truck and a bus. From the wind tunnel tests, the minimum height of a wind barrier required to reduce the wind speed by 50% was found to be 12.5% of the road width. In the case of parallel bridges, the placement of two edge wind barriers plus one wind barrier at center was recommended for a separation distance larger than 20 m (four lanes) and 10 m (six lanes) respectively, otherwise two wind barriers were recommended.

• 한국전산구조공학회논문집
• /
• 제23권1호
• /
• pp.17-26
• /
• 2010

본 연구에서는 강풍에 의한 차량의 주행안정성 확보를 위해 설치하는 방풍벽의 설치기준을 제안하였다. 이를 위하여 먼저 차량전용해석 수단인 CarSim 및 TruckSim을 사용하여 풍속 및 차량속도에 따른 횡방향 이탈량을 계산하고, 이로부터 차종별 위험 풍속을 결정하였다. 그리고 방풍벽 설치 여부의 판단을 위해 방풍벽 설치로 인해 얻을 수 있는 사고위험과 주행편익 등을 생애주기 동안의 비용으로 환산하였다. 사고위험 계산을 위해 해당지역의 풍속확률분포, 일평균통행량, 차종별 혼입율 및 구간풍속 지속시간 등을 이용하였다. 방풍벽 설치 전과 후의 총 비용과 편익을 비교하여 방풍벽 설치로 인한 편익이 설치 비용보다 큰 경우 방풍벽을 설치하는 것으로 판정하였다. 수치해석을 통해 고속도로 상의 두 곳을 대상으로 방풍벽 설치 여부에 대한 판정을 수행하였다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2006년도 추계학술대회 논문집
• /
• pp.91-92
• /
• 2006