• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2014.10a
• /
• pp.135-137
• /
• 2014

The expansion of the transportation card, and the popularity of smart phones has been increasing social concern about the NFC technology. Has been focused on the use of e-commerce, most of the NFC, fulfilling the security problems or technical topic for this, but the reality is that the current debate on the new value added contents industry and a nonexistent connection. Leverage NFC for efficient order management system in order to build lunch or dinner by being pushed to ease restrictions on remodeling and renovation projects Food Truck vehicle through a small business support programs in the current government, but increasing interest in the Food Truck I study a model of ordering system for food truch 재소 s-guide system. A lot of the effectiveness of management as appropriate to the use of NFC for small business that operates as a server system is highly Food Truck tendencies tied to one router and server on the intranet without the need of internet connection system. I believe in this study S-Guide system contributes for business success for food truck of small business.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.29 no.3A
• /
• pp.189-197
• /
• 2009

In this study, truck weight data and load effects of single truck on bridges are analyzed for development of new vehicular load model of the reliability-based bridge design code. Rational load model and statistical properties of loads are important for developing reliability-based design code. In this study, truck weight data collected at four locations are used as well as data from four locations in other studies. Truck weight data are collected from WIM or BWIM system, which are known to give reliable data. Typical truck types, dimensions and axle weight distribution are determined. Probability distributions of upper 20% total truck weight are assumed as Extreme Type I and 100 years maximum truck weights are estimated by linear regression on the probability paper. The load effects of trucks having estimated maximum weights are analyzed for span length from 10 m to 200 m.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.6 no.3
• /
• pp.154-160
• /
• 1998

Ride quality of medium truck became a very important factor in the suspension design, to the demand of more comfortable ride of passengers. This study describes how to determine and evaluate design parameters related to the chassis suspension system with time and frequency analysis. The spring stiffness and damping force of the chassis suspension system were obtained by observing the vertical acceleration PSD. The simulation was carried out on various road profiles, which was suggested by ISO. The pitching motion of the medium size truck was observed to improve the ride quality. A computer simulated truck model was constructed using DADS, a commercial dynamic analysis software, in order to simulate the truck motions. From the analyzed process of suspension parameters, it was concluded that the spring and the shock absorbers affect the pitching of the vehicle. In order to validate the computer simulated truck model, a physical prototype was constructed and tested.

• Proceedings of the KIEE Conference
• /
• 1989.07a
• /
• pp.142-145
• /
• 1989

The electromagnetic suspension system, which is a kind of magnetic levitation, can be categorized into two groups; separate lift & guidance system and combined lift & guidance system. This paper deals with the latter system, in which lift and guidance forces are generated by a pair of staggered magnets with the inverted U- shaped rail. In this work, a rigid body bogie-truck and a twist response type of bogie-truck, which are constructed by two magnetic wheels consist of two staggered magnet pairs, are modeled, and curvature running characteristics of both types obtained by simulation are presented. Simulation result showed that curvature running characteristics of twist response type of bogie-truck is better than that of rigid body bogie-truck.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.19 no.5
• /
• pp.14-20
• /
• 2020

In this study, the overall states of the airflow when a truck with or without side pairing is driven at a maximum speed of 90 km/h, regulated by domestic law, were investigated through computational fluid dynamics numerical analysis. All the tested models showed that the airflow went under the truck body; specifically, the air did not flow along the underside to the rear of the truck but through the sides of its underside. The drag with the drag coefficient at model 3 was clearly higher than those for the other two models. The results of this study could help to improve the truck performance by reducing its resistance against the air flown from it in driving itself.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 1998.03a
• /
• pp.304-309
• /
• 1998

In recent truck industry, ride quality improvement as well as payload capacity is a very important subject. In order to achieve this goal, it is necessary to study several sub-systems (powertrain, suspension, engine mount, exhaust, etc) of truck which are major components of vehicle. In this research, torsional vibration reduction method of 4$\times$2 truck powertrain is demonstrated by using computer simulation and experiment. First, truck powertrain is modeled as a vibration system and validity of developed model is verified by comparing free vibration results with experiment results. Second, Most key parameters which influence torsional resonance are examined utilizing mode analysis. Finally, frequency responses of truck powertrain are obtained and reduction counterplans of torsional vibration are suggested.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2001.05a
• /
• pp.855-860
• /
• 2001

In this study, the improvement work to reduce the steering wheel vibration of a forklift truck is performed. The forklift truck newly developed possesses a trans-axle type power train to achieve a compact and low-price design. The forklift truck is directly subjected to a high-level engine vibration through hard mounted trans-axle housing. The engine vibration shakes the whole system of the forklift truck, and then a high level local vibration of steering wheel could not be avoided. As the results, the vibration source and path mechanisms are experimentally identified and then an improvement design is proposed to minimize the steering wheel vibration.

• Journal of the Korean Institute of Gas
• /
• v.24 no.6
• /
• pp.77-82
• /
• 2020

In this paper, we developed a cooling system for the refrigeration truck using natural carbon dioxide refrigerant which is attracting attention as an environmentally-friendly refrigerant. We developed a high efficient environmentally-friendly refrigerated truck that converted the existing diesel vehicle into an LNG vehicle to improve emissions of truck and improved the efficiency of the cooling system by utilizing a heat of LNG vaporization. The COP of refrigerated truck system was increased 144%.

• Journal of Korean Society of Transportation
• /
• v.22 no.4 s.75
• /
• pp.117-134
• /
• 2004

Truck traffic accounts for a substantial fraction of the traffic stream in many regions and is often the source of localized traffic congestion, potential parking and safety problems. Truck trips tend to be ignored or treated superficially in travel demand models. It reduces the effectiveness and accuracy of travel demand forecasting and may result in misguided transportation policy and project decisions. This paper presents the development of speed-flow relationships with truck impacts based on CORSIM simulation results in order to enhance travel demand model by incorporating truck trips. The traditional BPR(Bureau of Public Road) function representing the speed-flow relationships for roadway facilities is modified to specifically include the impacts of truck traffics. A number of new speed-flow functions have been developed based on CORSIM simulation results for freeways and urban arterials.

• Journal of Korean Society of Transportation
• /
• v.26 no.5
• /
• pp.7-16
• /
• 2008

There are unique aspects of truck vehicle movements compared with the personal travel in trip chaining. This paper reports an analysis on the truck vehicle trip chaining which intercity/metropolitan/intraregional trips are classified. Data collected from the travel dairy survey is used the truck trip-chaining analysis. The pattern of trip chaining classes is classified by the GIS mapping based on orgin-destination trip information. The physical index and efficiency index for each trip diary is used to the truck vehicle activity. Truck trips lengths and time differs from its truck type, service type and travel patterns. It is shown that the efficiency of the truck trip chaining depends on vehicle types and its delivery patterns. There are many other topics for research on trip chaining modeling such as the classification of trip chain, time use and mode choice by trip chaining.