• 전기전자학회논문지
• /
• 제22권4호
• /
• pp.1088-1092
• /
• 2018

In this paper, we propose a dual-mode frequency tripler using push-push and stacked FET structures. The proposed circuit can operate either in frequency multiplier mode or in amplifier mode. In the frequency multiplier mode, push-push frequency multiplication is achieved by allowing input signals with particular phase shifts. In the amplifier mode, the device operates as a distributed amplifier to obtain high gain. Also both modes were designed using stacked FET structure. The designed circuit showed frequency tripled output power of 9.7 dBm at 2.4 GHz with the input at 800 MHz. On the other hand, in the amplifier mode, the device showed 8.9 dB of gain to generate 19.5 dBm at 800 MHz.

• 반도체디스플레이기술학회지
• /
• 제16권2호
• /
• pp.85-88
• /
• 2017

In this paper, we have designed and fabricated a RF-DC voltage multiplier for 5.8GHz microwave wireless power transmission. In order to obtain higher voltage, the RF-DC voltage multiplier with 10 diodes (D-10) and the receiver module with an antenna and BPF (Band Pass Filter) was manufactured. The measured and compared results show that the voltages of the proposed one are lower than those of the previous tripler module up to 40cm. However, the voltage of the proposed one with the voltage multiplier is higher than that of the tripler module at the distances of 45cm and 50cm due to the voltage multiplier with 10 diodes.

• 한국통신학회:학술대회논문집
• /
• 한국통신학회 2004년도 추계종합학술대회 논문 초록집
• /
• pp.410-410
• /
• 2004

• Maxillofacial Plastic and Reconstructive Surgery
• /
• 제41권
• /
• pp.34.1-34.5
• /
• 2019

Background: To systematically review the literature for methods to localize the genial tubercle as a means for performing an advancement of the genioglossus muscle. Methods: PubMed, Google Scholar, CRISP, EMBASE, CINAHL, and Scopus were searched from inception through June 16, 2015. Results: One hundred fifty-two articles were screened, and the full text versions of 12 articles were reviewed in their entirety and 7 publications reporting their methodology for localizing the genial tubercle. Based upon these measurements and the results published from radiographic imaging and cadaveric dissections of all the papers included in this study, we identified the genial tubercle as being positioned within the mandible at a point 10 mm from the incisor apex and 10 mm from the lower mandibular border. Conclusion: Based upon the results of this review, the genial tubercles were positioned within the mandible at a point 10 mm from the incisor apex and 10 mm from the lower mandible border. It may serve as an additional reference for localizing the genial tubercle and the attachment of the genioglossus muscle to the mandible, although the preoperative radiological evaluation and the palpation of the GT are recommended to accurately isolate.

• ETRI Journal
• /
• 제35권3호
• /
• pp.386-396
• /
• 2013

A 10-Gbit/s wireless communication system operating at a carrier frequency of 300 GHz is presented. The modulation scheme is amplitude shift keying in incoherent mode with a high intermediate frequency (IF) of 30 GHz and a bandwidth of 20 GHz for transmitting a 10-Gbit/s baseband (BB) data signal. A single sideband transmission is implemented using a waveguide-tapered 270-GHz high-pass filter with a lower sideband rejection of around 60 dB. This paper presents an all-electronic design of a terahertz communication system, including the major modules of the BB and IF band as well as the RF modules. The wireless link shows that, aided by a clock and data recovery circuit, it can receive $2^7$-1 pseudorandom binary sequence data without error at up to 10 Gbit/s for over 1.2 m using collimating lenses, where the transmitted power is 10 ${\mu}W$.

• 한국산업정보학회논문지
• /
• 제20권1호
• /
• pp.49-55
• /
• 2015

This paper proposes a 2.4 GHz RF oscillator with a very low close-in phase noise performance. This is composed of a low frequency crystal oscillator and three frequency multipliers such as two doubler (X2) and one tripler (X3). The proposed oscillator is implemented as a hybrid type circuit design using a discrete silicon bipolar transistor. The measurement results of the proposed oscillator structure show -115 dBc/Hz close-in phase noise at 10 kHz offset frequency, while only dissipating 5 mW from a 1-V supply. Its close-in phase noise level is very close to that of a low frequency crystal oscillator with little degradation of noise performance. The proposed structure which is consisted of a low frequency crystal oscillator and a frequency multiplier provides new method to implement a low power low close-in phase noise RF local oscillator.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2003년도 통신소사이어티 추계학술대회논문집
• /
• pp.77-80
• /
• 2003

We design the local oscillator system of the 100 GHz band radio receiving system for a cosmic radio observation. We use the YIG oscillator with digital driver which is the main oscillator. This oscillator has a good frequency and phase stability at some temperature variation, and the easy computer aided control characteristics. This total system designed to two subsystem, first is the oscillator system include YIG oscillator, tripler, harmonic mixer and triplexer etc., second is the PLL system to supply the precise and stable local oscillator frequency to mixer. The proposed local oscillator system in this paper can be use a single or multi pixel receiver because this system can be lock the local oscillator frequency automatically using PC.

• Journal of electromagnetic engineering and science
• /
• 제8권1호
• /
• pp.17-22
• /
• 2008

It is presented that sampling rates for behavioral modeling of quasi-memory less nonlinear devices can be far less than the Nyquist rate of the input signal. Although it has been believed that the sampling rate of nonlinear device modeling should be at least the Nyquist rate of the output signal, this paper suggests that far less than the Nyquist rate of the input signal can be applied to the modeling of quasi-memoryless nonlinear devices, such as frequency multipliers. To verify, a QPSK signal at 820 MHz were applied to a frequency tripler, whereby the device can be utilized as an up-converting mixer into 2.46 GHz with the aid of digital predistortion. AM-AM, AM-PM and PM-PM can be successfully measured regardless of sampling rates.

• 한국인터넷방송통신학회논문지
• /
• 제17권6호
• /
• pp.79-82
• /
• 2017

본 논문에서는 밀리미터파 포락선 검파기를 이용한 무선통신시스템을 제안하였다. 송신기는 쇼트키 다이오드 기반의 서브 하모닉 믹서를 이용하였으며, 수신기는 밀리미터파 포락선 검파기를 이용하였다. 송신기는 쇼트키 다이오드 서브 하모닉 믹서, 주파수 3배기, 혼안테나로 구성되며, 수신기는 혼안테나, 밀리미터파 포락선 검파기, 저역통과필터, 베이스 밴드 증폭기, 리미팅 증폭기로 구성된다. 1.485 Gbps, 300 GHz에서 아이 다이어그램 (eye-diagram) 측정 결과 에러 프리 (error-free)로 아주 좋은 성능을 보였다. 헤테로다인 수신기에 비해 통신 거리는 줄었으나, 소형 경량화 제작이 가능하다.

• 한국전자파학회논문지
• /
• 제22권11호
• /
• pp.1137-1140
• /
• 2011

본 논문은 RF 전력증폭기용 트랜지스터의 주파수 체배기 활용을 위한 최대 효율 조건에 대해 분석하고, 고효율 달성을 위한 출력 정합 회로에서의 고조파 임피던스와 기생 성분에 의한 부정합 영향에 대해 고찰하였다. 이를 바탕으로 능동 주파수 체배기의 설계에 있어 입력 바이어스 제어를 통해 고조파 전류를 발생시키는 경우의 이론적인 고조파 전력을 예상하였으며, class-F 구조를 기반으로 하여 주파수 3체배기를 설계하고, 트랜지스터의 비선형 파라미터로써 정규화된 3차 고조파 전력을 예상하였다. 위의 분석 결과를 바탕으로 2.475 GHz에서 주파수 3체배기를 설계하였으며, 시뮬레이션 효율 약 19.5 % 및 측정 효율 22.9 %, 최대 변환 이득 9.5 dB의 결과를 얻을 수 있었다.