• The Transactions of the Korean Institute of Electrical Engineers D
• /
• v.53 no.12
• /
• pp.813-819
• /
• 2004

This paper infers two patterns of timeout from the characteristics of TCP Reno and confirms the existence of the patterns by conducting actual experiments. All timeouts can be classified into either of these patterns by using the history of RTT value. Based on the observed patterns, the paper proposes two algorithms to improve the performance of TCP Reno. Experimental results show that, when compared with TCP Reno, the proposed algorithms improve the bandwidth utilization by 3 to 12 percent. The paper provides good examples of how timeout-based and delay-based congestion control can efficiently work together.

• Fire Science and Engineering
• /
• v.28 no.5
• /
• pp.8-13
• /
• 2014

The purpose of this study is to analyze the damage pattern when overcurrent is applied to a thermal magnetic type molded case circuit breaker (MCCB) using a Primary Current Injection Test System (PCITS). When an overcurrent of 150 A was applied to the PCITS for 5 seconds with the trip bar of an MCCB being damaged, it was found that the surface of the temperature control device (bimetallic strip) positioned at the right was significantly carbonized. When an overcurrent of 300 A was applied to the PCITS for 5 s under the same conditions, the entire temperature control device was deteriorated, becoming flattened and in close contact with the MCCB. When an overcurrent of 450 A was applied to the PCITS for 5 s, the coil of the temperature control device was melted and disconnected. In addition, it was observed that the contacts, the enclosure and upper cover were deformed and there was a trace of carbonization on them. When approximately 3 s had elapsed after an overcurrent of 600 A was applied, white smoke occurred inside the MCCB and a flame was radiated out, after which the overcurrent supply stopped with "phutt" (whomp) sound. It was observed that when the same type of MCCB is damaged by a general flame, the surfaces of its handle, terminal, arc divider (extinguisher) and temperature control device were carbonized uniformly. In addition, it was found that the trip bar of the operating mechanism was melted down and the metal operation pin was moved while being tripped.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.32 no.6D
• /
• pp.539-547
• /
• 2012

Increasing the mode transfer volume between public transportation modes has known to be necessary for efficiency improvement of public transportation system operation and it is also found to be important to have relevant transfer point selection with reflection of current travel pattern. This study is in regards to providing a selection guideline for the location of transfer point between public transport modes. This case study has been carried out for Daegu Metropolitan City especially for public transportation users behaviour by analysis of daily usage of transportation card to identify the transfer travel pattern. A cluster analysis was applied to categorize the pattern of transfer stop which induces many users and a discriminant analysis also utilized for grouping the stops by number of transfer trip. This research produces the estimation result of transfer volume for urban railway system no.3 in Daegu City which is currently under construction. In addition, the locations of transfer center has also been proposed.

• Journal of Korea Spatial Information System Society
• /
• v.12 no.1
• /
• pp.95-99
• /
• 2010

Spatial information systems have developed in order to provide users with customized land information in u-City environments. The spatial information systems can detect spatial information for users anytime anywhere. Information which is analyzed by data mining techniques can be offered for other users. Therefore, we propose open map API-based prototype which utilizes frequent pattern mining technique. Proposed prototype can mine interesting trip routes and unknown attractions in location data of geophoto. Also, proposed prototype is the first attempt which analyzes spatial patterns can be represented on a map which is selected by users. Our prototype can be applied to the smart phone like mobile devices.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.11 no.2
• /
• pp.1-9
• /
• 2012

This study proposed a method to determine the number and location of bus information terminals (BIT), which is a device to provide passengers with bus arrival time at bus stops in a Bus Information System (BIS). In low-density area, it is not efficient to survey bus demands such as the number of passengers at all bus stops due to time and cost. This kind of a survey would, however, competently cover all bus stops if performed inside the bus. The number of riding-on and -off passengers is observed for every bus stop, and this data collection is repeated over all day. Data obtained from the survey are aggregated each bus stop. This study defines Utility Index (UI), an aggregate each bus stop. Bus stops are ranked according to UI and determined for a BIT within budget limitation. As a case study, a bus line in Jeju island, Korea, was dealt with. This case showed that the more aggregate the better data quality. This study is expected to contribute to solving a location problem of BITs in a BIS.

• Journal of the Korean Society for Railway
• /
• v.15 no.6
• /
• pp.609-615
• /
• 2012

TPS (Train Performance Simulation) based on ATO (Automatic Train Operation) is required for driverless LRT (Light Rail Transit) operation plan instead of typical TPS based on driver operation. In this paper, new TPS model using ATO pattern is proposed and compared with the automatic train operation result in a test line of Seoul Metro Line 6 and in a whole line of Busan-Gimhae LRT. The actual ATO pattern can be very accurately simulated by new TPS model with the introduction of 4 parameters such as commercial braking rate, jerk, station stop profile and grade converted distance. The commercial scheduled time for driverless automatic train operation can be proposed to have "Fast" mode TPS trip time plus 3 seconds/km margin recommended by Korean standard LRT specification in this paper.

• Proceedings of the KSR Conference
• /
• 2009.05a
• /
• pp.773-790
• /
• 2009

The Korea high speed train was launched from Seoul to Busan of 1st construction phase at 1st April, 2004. This huge project will be lead to a great change in korean society such as existing mode choice behavior change and the concentrating on KTX station zone lifestyle pattern's change. With the result to opening high speed train railway was diminished train journey time between Seoul to Busan from 4 hours 10 minute to 2 hours 40 minutes, and has been change population movement, favorite location of corporation headquarters, existing metropolitan transportation pattern and so on. In the middle of this study, I choose to analyse Seoul-Cheonan/Asan stations, Seoul-Deajeon stations, Seoul-Deagu stations, Seoul-Pusan stations. This study have a information to analyse among as like movement of population, status of employee structure, usage of land, movement inland transportation mode. I sure that this study will lead to helpful prediction both 2nd phase of Kyoung-bu high-speed railway and Ho-nam high-speed railway in advance.

• Journal of Cadastre & Land InformatiX
• /
• v.52 no.2
• /
• pp.153-169
• /
• 2022

With the extension of the average life span and the rapid aging of the population, defining elderly population as a single group is difficult as the physical, economic and social conditions of individual have become different. Therefore, policies that take into account the characteristics of each group are required. The purpose of this study is to classify individual travel types and to analyze the characteristics of each travel type, based on individual public transportation trajectory data as known as smart card data. Among the four classified types, the long-distance low-frequency stay type and the short-range medium-frequency mobile type show external activity traffic characteristics for retirement leisure, while the long-distance high-frequency stay type and the long-distance high-frequency mobile group include regular commuting. Traffic variability and residence areas of stay were identified in terms of each classified travel type. The results of this study provide the important suggestions for establishing a transportation policy that takes into account the characteristics of each type of elderly population in Seoul.

• Journal of Korean Society of Transportation
• /
• v.7 no.1
• /
• pp.19-34
• /
• 1989

In general, Shopping centers are located in the center of transportation, which induce more traffic concentration than other facilities. As a result, it becomes to one of the aggravating factors of urban ＆ transportation problem such as traffic conjestion, parking problems. Thus, in planning shopping-center, it is desirable that consumer\`s trip pattern is should lie more carefully analyzed in order to alleviate the above problems. This study is aimed at finding the characteristics of shopping tripes and analyzing the choice behavior of shopping center and mode-to-shop. This study has developed a nested logit model in which consumers choose shopping center and mode-to-shop with a sequential structure. The model was estimated using household data from the 1989 May, Seoul metropolitan area and the 18 alternatives of shopping center and 5 mode alternatives. The estimated model have been evaluated and it may be concluded that this model for shopping trips is effective and fesible. The conclusion of this study are as fellows. 1. Out-of-vehicle travel time is more important factor affecting behavior of mode choice than in-vehicle travel time. 2. All of direct-elasticities for mode with respect to the travel time is more elastic than travel cost. 3. Accessibility to shop is more important factor affecting the choice of shopping center than parking space. 4. The value of out-of-vehicle travel time exceeds the value of in-vesicle travel time by 1.64 times.

• Journal of Institute of Control, Robotics and Systems
• /
• v.14 no.4
• /
• pp.353-360
• /
• 2008

The LGP with nanometer structures resulted in enhancement of optical efficiency. Its fundamental mechanism is to recycle the polarized light via one round-trip through QWP(Quarter-Wave Plate) but the maximum efficiency to reach with this method is limited up to 2. To get the larger efficiency than this limited one a LGP with nanometer-patterned grating is suggested. For its optimum design the computer simulation is performed and suggests a grating that the spatial frequency between adjacent patterns is 500nm, its height 250nm, duty cycle 50%, and its cross section is rectangular. On the basis of simulation results the LGP with nanometer-patterned grating is fabricated and its optical properties such as angular intensity distribution and CIE color coordinates are characterized. The angles of transmitted light are nearly the same as the results expected from the generalized Snell's law. Thus the Mathematica code, developed in this experiment, will be applied to designing the optimized LGP. The LGP with nanometer-patterened grating shows the enhancement of transmitted intensity distribution up to 4.9 times.