• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.7 no.8
• /
• pp.1598-1603
• /
• 2003

A microstrip array antenna is designed and tested for satellite broadcasting receptions. The Sierpinski equilateral triangular patch and SSFIP(slot­strip­foam­inverted patch) structures are used. The Sierpinski geometry is composed of 3 equilateral triangular patch and is easy to generate a circular polarization by sequential rotation array techniques. This 1${\times}$3 Sierpinski equilateral triangular patch antenna is extended to 8${\times}$2 array antenna for satellite broadcasting receptions. The measurement results of the reflection coefficients and the radiation patterns of the manufactured array antenna show good agreements with the simulation results.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2003.05a
• /
• pp.546-550
• /
• 2003

For dual-band operation, it can be done by loading two pair of narrow slots in the equilateral-triangular patch, one embedded close to the side edges of the patch and the other inserted at the bottom edge of the patch. The obtained two operating frequencies are of same polarization planes. The frequency ratio of the two operating frequencies is turnabled by varing the positions and lengths of the inserted slots at the bottom edge of the patch. In this paper, A single-feed equilateral-triangular microstrip patch with two pairs of narrow slot for dual-frequency operation is printed on the substrate(TMN-4 Rosers Co.) of the 60 miles. the antenna radiation characteristics are calculated by Ensemble ver. 5.0 software, and compared with the experimental results.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2003.10a
• /
• pp.49-52
• /
• 2003

A microstrip array antenna is designed and tested for satellite broadcasting receptions. The Sierpinski equilateral triangular patch and SSFIP(slot-strip-foam-inverted patch) structures are used. This 1$\times$3 Sierpinski equilateral triangular patch antenna is extended to 8$\times$2 array antenna for satellite broadcasting receptions. The measurement results of the reflection coefficients and the radiation patterns of the manufactured array antenna show good agreements with the simulation results.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.19 no.10
• /
• pp.1159-1165
• /
• 2008

In this paper, a single-feed equilateral-triangular microstrip antenna with truncated corners is used for achieving diverse radiation polarization. The proposed antenna is excited by a microstrip line, which is place parallel to an oblique side of the equilateral-triangular patch. Depending on whether the three identically-sized comers of the triangular patch are cut or not, the equilateral-triangular microstrip antenna shows linear polarization(LP) or left-hand circular polarization(LHCP) or Tight-hand circular polarization(RHCP). Based on the equilateral-triangular microstrip antenna with truncated corners, a novel reconfigurable microstrip antenna with switchable polarization sense is also proposed. The proposed reconfigurable antenna has a simple structure, consisting of a corner-truncated triangular patch, a small triangular conductor, and a microstrip line. Using a biased PIN diode between the patch and the small triangular conductor, it can produce LP or RHCP according to bias voltages. From the measured results, low cross polarization level when operated in the linear state and good axial ratio in the circular state are observed.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.43 no.8 s.350
• /
• pp.103-109
• /
• 2006

In this paper, single-feed equilateral triangular microstrip antennas(ETMA) for circular polarization(CP) are designed and studied experimentally. It is demonstrated that by embedding a narrow slot or a cross of unequal slot lengths in the triangular patch circularly polarized radiation RHCP(right-hand circularly polarized wave), LHCP(left-hand circularly polarized wave) of microstrip antennas can easily be achieved using by strategically positioned coaxial single probe feed. And the size of a triangular microstrip patch antenna is smaller than that of a conventional rectangular or circular patch at a given frequency. A single-feed ETMA with a horizontal narrow slot is printed on the substrate of 60 mils thick and the other ETMA with a corss slot of unequal slot lengths is printed on the same substrate. The antenna radiation characteristics are calculated by ENSEMBLE(Ver. 5.0) software, and compared with the experimental results. This results show that the antenna size reduction of about $17%{\sim}2l%$ is obtained as compared to the regular-size CP design.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.14 no.6
• /
• pp.638-647
• /
• 2003

Triangular patches have been studied, both theoretically and experimentally. We feund that provided radiation characteristics similar to those of rectangular patches, but with smaller size. In this paper, we designed an equilateral triangular microstrip patch antenna using cavity model analysis. Then, in order to improve narrow bandwidth, we add capacitive gap and air gap. Capacitive gap is located with square shape beside feeding point on the patch, and air gap is inserted between substrate dielectric and ground plane to adjust probe inductance. The analysis of characteristics and effects of each component was performed by commercial simulation tool, Ensemble 5.0. Throughout the simulation and experiment, we found the possibility of bandwidth enhancement in triangular microstrip antenna.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.20 no.2
• /
• pp.174-182
• /
• 2009

In this paper, we propose a novel hybrid reader antenna using a triangular and rectangular sub-patch for near- and far-field RFID reader in UHF band. The antenna operates at 912 MHz, and the low-cost mass-production is available, since the antenna can be built by printing on a FR-4 substrate. The triangular patch is designed to produce a circularly polarized radiation along the bore-sight direction and the rectangular sub-patch is designed to generate a strong magnetic field over the antenna aperture. The measurement shows Hz field greater than -25 dBA/m(3 cm above the antenna aperture), and exhibits circularly polarized radiation(AR<3 dB) with a radiation gain of 6 dBi.

• Journal of the Institute of Convergence Signal Processing
• /
• v.9 no.2
• /
• pp.141-145
• /
• 2008

When the current flows to parallel lines with different length, it is researched that the radiation is occured by the common-mode current radiates, and the small light weight antenna composed of dual elements by using the principle is proposed. However, there is a problem in production about this antenna because this liner antenna is structured by combining with wires. In this paper, we improved this liner antenna, and designed the plane antenna composed of dual elements with different length in the plane printed board to produce and to design easily. Furthermore, the antenna with the wide-band characteristic is also designed in the same board. The radiation pattern is similar to the dipole antenna on account of designing the triangular patch S, the notch and two tapers in patch S, the notch and two tapers in the antenna element. In result, it was able to design the antenna working wider band-width(the bandwidth ratio about 58%, $VSWR{\le}2$).

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.11 no.7
• /
• pp.1282-1290
• /
• 2000

The LHCP circularly polarized antenna operating at the satellite broadcast receiving band is developed by employing the sequential-rotation technique in which each truncated-corner patch square element is arranged in the triangular lattice type. Antenna designed with sequentially rotated technique of triangular lattice type has the effect of improved axial-ratio bandwidth, cross-polarization etc., and the degradation of radiation pattern can be reduced significantly by minimizing the radiation loss of feeding line structure. Characteristics of antenna designed is satisfied with specifications of array antenna for DBS that is -27 dB of side lobe level and -20 dB of cross-polarized level at $\Phi$=45$^{\circ}$ plane.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.24 no.1
• /
• pp.103-107
• /
• 2024

This paper is a study on a triangle patch antenna using a rectangle slot and strip conductor. The length and spacing of the slot were adjusted to confirm the characteristics of the triangle patch antenna with rectangle slot, and the area and shape of the radiation patch were changed to triangle, rectangle, and hexagon for impedance matching. The HFSS simulator was used to check the antenna parameter characteristics, and the antenna size was 26 mm ×26 mm. In this proposed antenna, the simulation frequency range with VSWR of 2 or less was 5.27 to 6.24 GHz. The bandwidth was 970 MHz. The frequency range of the fabricated antenna was 5.24 to 6.38 GHz, and the bandwidth 1140 MHz. The maximum radiation gain is 5.01 dBi. It was confirmed that all radiation patterns had directional characteristics.