• 한국공간정보시스템학회:학술대회논문집
• /
• 한국공간정보시스템학회 2004년도 춘계 학술발표회 논문집 제1권1호(통권1호)
• /
• pp.230-237
• /
• 2004

In this study, equation of finite element is formulated to analyze relations of large deformation-small deformation considering geometrical nonlinear for membrane structure. Total Lagrangian Formulation(TLF) is introduced to formulate theory and equation of motion considering Triangular Constant Strain(TCS) element in finite, element analysis is formulated. Finite element program is made by equation of motion considering TLF. This study analyzed a variety of examples, so compared with the past results.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2011년 춘계학술대회논문집
• /
• pp.10-13
• /
• 2011

A level set method is proposed to simulate the incompressible two-phase flow considering the effect of surface tension. For reinitialization of level set junction, a direct approach method is employed, instead of solving hyperbolic type equation. A mixed element is adopted, so that the continuity mid Navier-Stokes equations are solved by using the quadratic elements (six-node triangular element mid nine-node quadrilateral element), mid the level set function is solved by using the linear elements (three-node triangular element mid four-node quadrilateral element). In order to verify the accuracy mid robustness of the codes, the present methods are applied to a few benchmark problems. It is confirmed that the present results are in good qualitative mid quantitative agreements with the existing studies.

• Journal of Electrical Engineering and Technology
• /
• 제9권4호
• /
• pp.1365-1368
• /
• 2014

A CPW-fed to CPS dipole antenna of triangular loop director by microstrip tapered balun is proposed for dual and wide band operations, in this paper. The proposed antenna is consisted of a CPW-fed to CPS transform, microstrip tapered balun element, CPS dipole driver and triangular loop director. A dual and wide bandwidth of the proposed dipole antenna is realized by introducing the triangular loop director and taper matching element. The operated frequency bandwidth is 1GHz (2.14~3.14 GHz) and 1.9 GHz (4.6~6.5 GHz) to return loss criterion of less than 10 dB. The measured return loss of the proposed antenna showed good results of the dual and wide band operating frequency and the radiation pattern. The proposed antenna is able to support WLAN wireless communications applications.

• 대한수학회보
• /
• 제57권2호
• /
• pp.393-406
• /
• 2020

We analyze a posteriori error estimator for the conforming P2 finite element on triangular meshes which is based on the solution of local Neumann problems. This error estimator extends the one for the conforming P1 finite element proposed in [4]. We prove that it is asymptotically exact for the Poisson equation when the underlying triangulations are mildly structured and the solution is smooth enough.

• International Journal of CAD/CAM
• /
• 제6권1호
• /
• pp.73-79
• /
• 2006

In this paper, we propose a new triangular finite element mesh generation method based on simplification of high-density mesh and adaptive Level-of-Detail (LOD) methods for efficient CAE. In our method, mesh simplification is used to control the mesh properties required for FE mesh, such as the number of triangular elements, element shape quality and size while keeping the specified approximation tolerance. Adaptive LOD methods based on vertex hierarchy according to curvature and region of interest, and global LOD method preserving density distributions are also proposed in order to construct a mesh more appropriate for CAE purpose. These methods enable efficient generation of FE meshes with properties appropriate for analysis purpose from a high-density mesh. Finally, the effectiveness of our approach is shown through evaluations of the FE meshes for practical use.

• 한국항공우주학회지
• /
• 제31권1호
• /
• pp.18-24
• /
• 2003

고차 지그재그이론을 이용하여 면내회전 자유도를 갖는 3절점 삼각형요소를 개발하여 점탄성물질이 심어진 비틀린 복합재료 판의 진동을 해석하였다. 평면상에서 점탄성물질과 가장자리에서 박리현상을 방지하기 위하여 사용된 경계물질사이의 경계면상에서 전단력 적합조건이 사용되었다. 본 연구에서 개발된 지그재그 삼각형요소를 이용하여 점탄성물질이 심어진 비틀린 외팔보 복합재료 판의 고유진동수와 감쇠계수를 계산하고 실험치 및 판과 고체요소를 혼합한 MSC/NASTRAN결과치와 비교하였다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2004년도 추계학술대회 논문집
• /
• pp.886-889
• /
• 2004

A simple macro triangle with drilling d.o.f.'s is proposed for plane stress problems based on IET(Individual element test) and finite element template. Three-node triangular element has geometrical advantages in preprocessing but suffers from bad performance comparing to other shapes of elements -especially quadrilateral. Main purpose of this study is to construct a high-performance linear triangular element with limited supplementary d.o.f.'s. A triangle is divided by three sub-triangles with drilling d.o.f.'s. The sub-triangle stiffness come from IET passing force-lumping matrix, so this assures the consistency of the element. The macro element strategy takes care of the element‘s stability and accuracy like higher-order stiffness in the F.E. template. The resulting element fits on the uses of conventional three-node. Benchmark examples show proposed element in closed form stiffness from CAS (Computer algebra system) gives the improved results without more computational efforts than others.

• 오토저널
• /
• 제3권3호
• /
• pp.24-29
• /
• 1981

This paper is studied an efficient temperature distribution and heat transfer of two-dimensional rectangular cross-section by the higher-order triangular finite dynamic element and finite difference. This is achieved by employing a discretization technique based on a recently developed concept of finite dynamic elements, involving higher order dynamic correction terms in the associated stiffness and convection matrices. Numerical solution results of temperature distribution presented herein clearly optimum element and show that FEM10 is the most accurate temperature distribution, but heat transfer and computational effort is the most acquired.

• 한국CDE학회논문집
• /
• 제5권2호
• /
• pp.144-154
• /
• 2000

We propose an algorithm for obtaining a triangular approximation of a trimmed NLRBS surface. Triangular approximation is used in the pre-processing step of many applications such as RP(Rapid Prototyping), NC(Numerical Control) and FEA(Finite Element Analysis), etc. The algorithm minimizes the number of triangular elements within tolerance and generates a valid triangular mesh for STL file and NC tool path generation. In the algorithm, a subdivision method is used. Since a patch is a basic element of triangular mesh creation, boundary curves of a patch are divided into line segments and the division of curves is applied for the interior of the surface. That is, boundary curves are subdivided into line segments and two end points of each line segment are propagated to the interior of the surface. For the case of a trimmed surface, triangulation is carried out using a model space information. The algorithm is superior because the number of elements can be controlled as the curvature of the surface varies and it generates the triangular mesh in a trimmed region efficiently. To verify the efficiency, the algorithm was implemented and tested for several 3D objects bounded by NURBS surfaces.

• 한국항공우주학회지
• /
• 제33권2호
• /
• pp.46-53
• /
• 2005

곡면 사각형 쉘 요소들이 다수인 것에 비해, 곡면 삼각형 요소들은 아주 소수이다. 이미 발표된, 선형 해석을 위한 6절점 2차 쉘 요소의 가정 자연 변형도 이론에 기초해, 본 연구에서는 6절점 쉘 요소의 기하학적 비선형 해석을 수행하였다. 쉘 요소는 표준 절점 자유도만으로 곡면 모델링이 가능하고, 수치해석 결과가 보여주는 바와 같이 다양한 잠김 현상들을 제거하는데 효율적인 요소임을 확인하였다.