• International Journal of Aeronautical and Space Sciences
• /
• v.18 no.4
• /
• pp.709-718
• /
• 2017

This paper proposes the guidance laws for an agile turn of air-to-air missiles during the initial boost phase. Optimal solution for the agile turn is obtained based on the optimal control theory with a simplified missile dynamic model. Angle-of-attack command generating methods for completion of agile turn are then proposed from the optimal solution. Collision triangle condition for non-maneuvering target is reviewed and implemented for update of terminal condition for the agile turn. The performance of the proposed method is compared with an existing homing guidance law and the minimum-time optimal solution through simulations under various initial engagement scenarios. Simulation results verify that transition to homing phase after boost phase with the proposed method is more effective than direct usage of the homing guidance law.

• The Research Journal of the Costume Culture
• /
• v.12 no.6 s.53
• /
• pp.1021-1030
• /
• 2004

The purpose of this study was to develop and make the head form by setting the region of the head for detailed measurement of the head to make the type of closely fit hat and typifying the head form of Korean women's with each region of the head based on the measurements of each region of the head according characteristics. A total of 285 Korean women's in the age group of 18 to 35 years old. It were measured through the direct measurement method by selecting 67 measurement items. As a result of the findings obtained from cluster analysis could be classified into 3 type. Type 1($46\%$) is U-shaped form, that is high in head height on sides and circumference is smallest, whose facial region and occiput is flattest of three types. Type 2($22.4\%$) is inverted triangle form, that is flat in head ridge, low in head height on sides and wide in the frontal width. Type 3($31.6\%$) is oval form, that is largest in size, has the projected occiput and is of three-dimensional form.

• Communications for Statistical Applications and Methods
• /
• v.15 no.4
• /
• pp.551-562
• /
• 2008

The loss reserve is defined as a provision for an insurer's liability for claims or an insurer's estimate of the amount an individual claim will ultimately cost. For the estimation of the loss reserve, the data which make up the claims in general is represented as run-off triangle. The chain ladder method has known as the most representative one in the estimation of loss reserves based on such run-off triangular data. However, this fails to capture change point in trend. In order to test of structural changes of development factors, we will present the test statistics and procedures. A real data analysis will also be provided.

• Journal of Educational Research in Mathematics
• /
• v.22 no.2
• /
• pp.261-275
• /
• 2012

There are some geometry achievement standards presented indistinctly in middle school mathematics curriculum revised in 2011. In this study, indistinctness of some geometric topics presented indistinctly such as symbol $\overline{AB}{\perp}\overline{CD}$ simple construction, properties of congruent plane figures, solid of revolution, determination condition of the triangle, justification, center of similarity, position of similarity, middle point connection theorem in triangle, Pythagorean theorem, properties of inscribed angle are discussed. The following three agenda is suggested as conclusions for the development of next middle school mathematics curriculum. First is a resolving unclarity of curriculum. Second is an issuing an authoritative commentary for mathematics curriculum. Third is a developing curriculum based on the accumulation of sufficient researches.

• Journal of Korean Society for Geospatial Information Science
• /
• v.24 no.2
• /
• pp.25-35
• /
• 2016

Since a sophisticated location determination technology (LDT) is necessary for accurate positioning in urban area environments, numerous studies related to the LDT using the RFID (Radio Frequency IDentification) technology have been implemented for real-time positioning and data transferring. However, there are still lots of unsolved questions especially regarding what to use as base stations and what are corresponding results under the intrinsic complexity of alignment and configuration of components used for the RFID positioning. This study proposes the street light fixtures as base stations where the RFID receivers will be embedded for the mobile tracking scheme. As street light fixtures are usually installed at a certain distance interval, they can be used as base stations for the RFID receiver installation. Using the principle of the single row triangle network, the RFID receiver organization is determined based on the experiments such as recognition distance measurement and tag position accuracy estimation at inside and outside of the single row triangle network. The results verify that the mobile tracking scheme which uses RFID-embedded street light fixtures, suggested and configured in this study, is effective for the real-time outdoor positioning.

• Journal of the Korean Society of Costume
• /
• v.57 no.7
• /
• pp.45-52
• /
• 2007

This study is based on the observation of women's Jangui in 17th centuries. As we observed, Jangui in seventeenth century was shown the same style. They were not headdress but coat. The characteristics of shape are Mokpankit, double-seop, straight sleeve, triangle moo, sam-su(which is attached to the end of sleeves) and a little coat string etc. There is no specific mode difference with the change of times. However, the straight sleeve is shown straight line in the early Chosun dynasty. Jangui in seventeen century are all oblique line sleeve except Jangui of Jin-ju Ha's family. Jangui put on coat do not seem clear-cut difference with the change of times. From Jangui of Yang-chun Hu's family in 14th centuries till An-dong Kim's family, the special features of Jangui are the same style. In addition, The double-seop in 17th centuries was not completely symmetry. However, after 19th centuries, Jangui for headdress was shown perfectly symmetry.

• Bulletin of the Society of Naval Architects of Korea
• /
• v.12 no.2
• /
• pp.3-12
• /
• 1975

As for two dimensional added mass coefficients for straight framed hull forms in a free surface of an ideal fluid, theoretical calculations by F.M. Lewis, vertical, K. Wendel, J.H. Hwang, and etc. are available; vertical modes of rectangular and triangle sections by Lewis, vertical, horizontal and torsional models of rectangular and triangle section by Wendel, and systematical calculations for vertical modes of single chine forms by Hwang. In this paper, employing the conformal transformation by which a unit circle and its exterior region can conformally mapped to a polygon and its exterior region, the author calculated two dimensional added inertia coefficients systematically for straight framed sections with single chine in horizontal and torsional modes of vibrations. As the results, it was found that sloping side angle is an important factor measuring the magnitude of two dimensional added inertia coefficient for a set of given values of the sectional area coefficient and the beam-draft ratio. To grasp it cleary in physical sense, pressure distributions are investigated for some typical section contours. The numerical results are presented graphically in the form of two dimensional added sectional area coefficients with beam-draft ratios and sloping side angles as parameters, so that the data may conveniently utilized for estimation of the added inertia coefficients based on a three parameter technique.

• Journal of KIISE:Information Networking
• /
• v.37 no.6
• /
• pp.431-443
• /
• 2010

In this paper, we propose a range-free localization method that can improve the estimation accuracy of Approximate Point in Triangle(APIT), which is the representative localization method for low cost wireless sensor networks. Specifically, we propose extended-APIT(e-APIT) method, which minimizes the error in deciding whether an object is in an area formed by three beacons. We also propose a way to improve the localization by narrowing down the potential localization area using the signals from neighboring beacons. According to the simulation performed, the proposed e-APIT method demonstrated noticeable accuracy improvement over the conventional APIT method.

• Archives of Plastic Surgery
• /
• v.47 no.1
• /
• pp.102-105
• /
• 2020

Malignant skin tumors and precancerous lesions have a predilection to be located in the nasal dorsum or sidewall. Although invasive reconstructions have been presented, no simple and suitable method has yet been reported for this area. The flap presented herein, named the lateral nasal advancement flap, is designed on the adjacent lateral region of the sidewall or nasal dorsum and advanced in the medial direction. Two Burow's triangles are removed in the upper and lower portions of the flap: the upper triangle along the nasofacial sulcus and the lower triangle along the nasofacial sulcus and/or the alar groove. Excellent results were obtained in the two clinical cases described in this report. Neither a trap door deformity nor dog-ears developed in either case. The postsurgical scars followed the aesthetic lines and became inconspicuous. A distinct angle was formed in the nasofacial sulcus without anchor sutures. This surgical procedure is technically simple and is performed under local anesthesia. Although the flap is a cheek-based advancement flap, postsurgical scars do not remain in the cheek; instead, they are located in the nasofacial sulcus and alar groove. The lateral nasal advancement flap is recommended for reconstruction of the nasal sidewall and dorsum.

• Current Applied Physics
• /
• v.18 no.11
• /
• pp.1327-1337
• /
• 2018

This paper investigates the vibration behavior of pristine and defected triangular graphene sheets; which has recently attracted the attention of researchers and compare these two types in natural frequencies and sensitivity. Here, the molecular dynamics method has been employed to establish a virtual laboratory for this purpose. After measuring the different parameters obtained by the molecular dynamics approach, these data have been analyzed by using the frequency domain decomposition (FDD) method, and the dominant frequencies and mode shapes of the system have been extracted. By analyzing the vibration behaviors of pristine triangular graphene sheets in four cases (right angle of 45-90-45 configuration, right angle of 60-90-30 configuration, equilateral triangle and isosceles triangle), it has been demonstrated that the natural frequencies of these sheets are higher than the natural frequency of a square sheet, with the same number of atoms, by a minimum of 7.6% and maximum of 26.6%. Therefore, for increasing the resonance range of sensors based on 2D materials, nonrectangular structures, and especially the triangular structure, can be considered as viable candidates. Although the pristine and defective equilateral triangular sheets have the highest values of resonance, the sensitivity of defective (45,90,45) triangular sheet is more than other configurations and then, defective (45,90,45) sheet is the worst choice for sensor applications.