• 한국소음진동공학회논문집
• /
• 제18권12호
• /
• pp.1310-1316
• /
• 2008

Bi-layer and tri-layer structures of electro-active paper(EAPap) using conductive polyaniline(PANI) coating were investigated to improve bending displacement of cellulose EAPap. Two different counter ions, perchlorate($CIO_4^-$) and tetrafluoroborate($BF_4^-$), are used as dopant ions in the PANI processing. The actuation performances of hi-layer and tri-layer structure are evaluated in terms of tip displacement, blocked force, strain energy density and power output density. The actuation performance of the tri-layer actuator was better than the hi-layer structure, and the maximum displacement and blocked force of tri-layer $CIO_4^-$ doped-PANI-EAPap were 13.2 mm and 0.15 mN, respectively. Also the power output of the actuator is similar to the required power of biological muscle application.

• 전기전자학회논문지
• /
• 제26권3호
• /
• pp.500-505
• /
• 2022

본 연구에서는 새로운 구조의 dual gate tri-layer split channel 박막트랜지스터를 제작하였다. 전류 구동 능력을 향상시키기 위해 액티브 층의 양쪽에 게이트를 형성하였고 전하이동도를 증가시키기 위하여 액티브 층에서 채널이 형성되는 구간인 첫번째 층과 세번째 층에 전도성이 높은 ITO 층을 배치하였다. 추가적으로 분할 채널을 이용하여 채널의 series 저항을 낮추면서 분할한 채널의 측면에서도 accumulation을 유도하여 전하이동도를 향상시켰다. 기존의 single gate a-ITGZO 박막트랜지스터가 15 cm²/Vs의 전하이동도를 가지는 반면 dual gate tri-layer split channel 박막트랜지스터는 134 cm²/Vs의 높은 전하이동도를 가졌다.

• 한국전기전자재료학회논문지
• /
• 제17권11호
• /
• pp.1149-1155
• /
• 2004

In this paper, novel methods for improvement of thermal stability of Ni-germano Silicide were proposed for nano CMOS applications. It was shown that there happened agglomeration and abnormal oxidation in case of Ni-germano Silicide using Ni only structure. Therefore, 4 kinds of tri-layer structure, such as, Ti/Ni/TiN, Ni/Ti/TiN, Co/Ni/TiN and Ni/Co/TiN were proposed utilizing Co and Ti interlayer to improve thermal stability of Ni-germano Silicide. Ti/Ni/TiN structure showed the best improvement of thermal stability and suppression of abnormal oxidation although all kinds of structures showed improvement of sheet resistance. That is, Ti/Ni/TiN structure showed only 11 ohm/sq. in spite of 600 $^{\circ}C$, 30 min post silicidation annealing while Ni-only structure show 42 ohm/sq. Therefore, Ti/Ni/TiN structure is highly promising for nano-scale CMOS technology.

• 대한전자공학회논문지
• /
• 제25권5호
• /
• pp.495-500
• /
• 1988

The effectiveness of tri layer resist (TLR) technique is compared with that of single layer resist (SLR) technique in order to make a 0.8um pattern with the linewidth deviation of 10 percents. SLR technique is not appropriate to shape the micro-pattern on oxide and aluminum steps because of the standing wave effect and the light scattering effect in shaping the resist pattern. On the contrary, the uniform line with a width of 0.8um on oxide and aluminum steps can be formed by TLR technique, reducting such effects. The planarization and the light absorption coefficient of the bottom layer resist in TLR are optimized by exposing it to ultra violet light after baking it for 30min at 230\ulcorner. An uniform line with a width of 0.8um on oxide step is defined with the light absorption coefficient of 0.85 whereas that on aluminum step is defined with 0.95.

• 한국산학기술학회논문지
• /
• 제18권1호
• /
• pp.216-221
• /
• 2017

폴리머 안경렌즈를 제조할 때 가시광선 영역에서 투과되는 빛을 증가시키고, 안경렌즈 표면에 형성되는 허상을 방지하는 반사방지 기능은 매우 중요하다. 본 연구에서는 굴절률 1.56, 1.60 및 1.67을 갖는 안경렌즈를 폴리머 렌즈 모노머 및 이염화 이부틸 주석 촉매제, 알킬 인산 에스터 이형제 등의 혼합물을 인젝션 몰드 방법으로 열중합 공정을 적용하여 제조하였다. 폴리머 안경렌즈 표면에서의 반사방지 효과를 조사하기 위하여 다층 박막 반사방지 코팅 구조(양면 또는 단면 코팅), 3층 박막의 Gaussian gradient-index profile 불연속 근사 반사방지 코팅 구조, 3층 박막의 quarter-wavelength 근사 반사방지코팅 구조 등 다양한 반사방지 코팅 구조를 설계하였고, E-beam 증착 시스템을 이용하여 열중합공정으로 제조된 폴리머 안경렌즈에 각각 코팅하였다. 폴리머 안경렌즈의 광학적 특성은 UV-visible spectrometer로 분석하였다. 반사방지 코팅 층을 구성하는 박막의 굴절률, 표면 거칠기 등의 소재 특성은 Ellipsometer와 원자힘 현미경(AFM)으로 분석하였다. 분석결과, 굴절률 1.56의 낮은 굴절률을 갖는 폴리머 안경렌즈에서 가장 효과적인 반사방지 코팅 구조는 다층 박막 반사방지 코팅 구조의 양면코팅이었다. 하지만 굴절률 1.67의 고굴절률 안경렌즈에 대해서는 3층 박막의 Gaussian gradient-index profile 불연속 근사반사방지 코팅 구조의 양면 코팅도 다층박막 반사방지 코팅구조의 양면코팅에 상응하는 반사방지 효과를 나타내었다.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2010년도 춘계학술대회 초록집
• /
• pp.87-87
• /
• 2010

Photoelectrochemical (PEC) systems are promising methods of producing H2 gas using solar energy in an aqueous solution. The photoelectrochemical properties of numerous metal oxides have been studied. Among them, the PEC systems based on TiO2 have been extensively studied. However, the drawback of a PEC system with TiO2 is that only ultraviolet (UV) light can be absorbed because of its large band gap (3.2 - 3.4 eV). Two approaches have been introduced in order to use PEC cells in the visible light region. The first method includes doping impurities, such as nitrogen, into TiO2, and this technique has been extensively studied in an attempt to narrow the band gap. In comparison, research on the second method, which includes visible light water splitting in molecular photosystems, has been slow. Mallouk et al. recently developed electrochemical water-splitting cells using the Ru(II) complex as the visible light photosensitizer. the dye-sensitized PEC cell consisted of a dye-sensitized TiO2 layer, a Pt counter electrode, and an aqueous solution between them. Under a visible light (< 3 eV) illumination, only the dye molecule absorbed the light and became excited because TiO2 had the wide band gap. The light absorption of the dye was followed by the transfer of an electron from the excited state (S*) of the dye to the conduction band (CB) of TiO2 and its subsequent transfer to the transparent conducting oxide (TCO). The electrons moved through the wire to the Pt, where the water reduction (or H2 evolution) occurred. The oxidized dye molecules caused the water oxidation because their HOMO level was below the H2O/O2 level. Organic dyes have been developed as metal-free alternatives to the Ru(II) complexes because of their tunable optical and electronic properties and low-cost manufacturing. Recently, organic dye molecules containing multi-branched, multi-anchoring groups have received a great deal of interest. In this work, tri-branched tri-anchoring organic dyes (Dye 2) were designed and applied to visible light water-splitting cells based on dye-sensitized TiO2 electrodes. Dye 2 had a molecular structure containing one donor (D) and three acceptor (A) groups, and each ended with an anchoring functionality. In comparison, mono-anchoring dyes (Dye 1) were also synthesized. The PEC response of the Dye 2-sensitized TiO2 film was much better than the Dye 1-sensitized or unsensitized TiO2 films.

• Structural Engineering and Mechanics
• /
• 제84권2호
• /
• pp.167-180
• /
• 2022

A strategic structure when exposed to direct hit of conventional bomb/projectile are severely damaged because of large amounts of energy released by the impact and penetration of bomb. When massive concrete slabs suffer a direct hit, the energy released during impact and penetration process are able to easily break up large mass of concrete. When over stressed under such impact of bombs, the concrete structure fails showing brittle behavioural nature. This paper is intended to study and suggest the protective measures for structures used for strategic application by adopting a means to dissipate the large quantum of energy released. To quantitatively evaluate the force, displacement and energy in such scenario, a fine numerical model of the proposed layered structure of different combinations was built in ANSYS programme in which tri-nitrotoluene (TNT) explosive was detonated at penetration depth calculated for GP1000 Lbs bomb. The distinct blast mitigation effect of the proposed structure was demonstrated by adopting various layers/barriers created as protective measures for the strategic structure. The calculated result shows that the blast effect on the structure is potentially reduced due to provision of buster slab with sand cushioning provided as protective measure to the main structure. This concept of layered protective measures may be adopted for safeguarding strategic structures such as Domes, Tunnels and Underground Structures.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2011년도 제41회 하계 정기 학술대회 초록집
• /
• pp.114-114
• /
• 2011

Graphene is the hottest topic in condensed-matter physics due to its unusual electronic structures such as Dirac cones and massless linear dispersions. Graphene can be epitaxially grown on various metal surfaces with chemical vapor deposition (CVD) processes. Such epitaxial graphene shows modified electronic structures caused by substrates. In the method for removal of the effect of substrate, there are bi, tri-layer graphene, gold intercalation, and oxygen intercalation. Here, We will present the changes of geometric and electronic structure of graphene grown on Ru(0001) by oxygen intercalation between graphene and Ru(0001). Using Scanning tunneling microscopy (STM) and spectroscopy (STS), we observed the aspect that the band gap features near the fermi level of graphene on Ru(0001) system is shifted and narrow. Based on the observed results, two effects by intercalated oxygen were considered.

• 한국항해항만학회:학술대회논문집
• /
• 한국항해항만학회 2010년도 춘계학술대회
• /
• pp.151-153
• /
• 2010

본 논문에서는 선박내 무선통신용 장비로 활용 가능한 대역인 TRS(Trunked Radio System), WLAN(Wireless LAN), DMB(Digital Multimedia Broadcasting) 삼중대역을 위한 평면 모노폴 소형 마이크로스트립 안테나를 설계하였다. 설계되어진 안테나는 접지면과 패치면을 동일면상에 위치시키는 CPW(Co-planar Waveguide)급전 구조를 이용하여 크기를 소형화하였다. 제안된 안테나는 유전율이 4.4, 두께 1.5mm, 탄젠트 손실이 0.04인 FR-4 기판을 이용하였으며, 삼중대역에서 2 이하의 정재파비를 만족하고 -10dB이하의 만족할 만한 입력대비 반사손실을 얻었다.

• The Korean Journal of Ecology
• /
• 제24권6호
• /
• pp.341-348
• /
• 2001

Population dynamics of the oldest relic stand of Pinus densiflora for. erecta which remains as a status of patch in Sokwang-Ri area, Uljin-Gun, was studied to provide the basic data for conservation of the oldest pine stand in Korea. The upper slope site and ridge site including total 12 plots mainly represented Pinus densiflora for. erecta and Quercus mongolica. These two tree species showed reverse J-shaped distribution. From this information, it was concluded that intensive interspecific competition between two species could be occurring. Age distribution of P. densiflora for. erecta on the sites above middle slope area was indicated bi-modal type or tri-modal type which was known as an age structure of climax forest. Therefore, it was estimated that Pinus densiflora for. erecta population could be continuously maintained in the each patch above middle slope area. In the valley sites, hardwood species such as Q. mongolica, Q. variabilis, Styrax obassia and Acer pseudosieboldianum occupied most part of the under crown-cover area and their seedlings and saplings were developing into the closed upper layer crown because the height of upper layer crown reached about 35 meters and such a high crown height was more suitable for light utilization by plants of under layer. The growth patterns were mainly fluctuated for the entire life time of the oldest tree caused by frequent disturbance. And the initial growth curves of the mature trees and suppressed juvenile trees showed different tendencies along the sites.