• Title/Summary/Keyword: Trend Curve

Search Result 306, Processing Time 0.023 seconds

Experimental research on dynamic characteristics of frozen clay considering seasonal variation

  • Xuyang Bian;Guoxin Wang;Yuandong Li
    • Geomechanics and Engineering
    • /
    • v.36 no.4
    • /
    • pp.391-406
    • /
    • 2024
  • In order to study the soil seasonal dynamic characteristics in the regions with four distinct seasons, the soil dynamic triaxial experiments were conducted by considering the environmental temperature range from -30℃ to 30℃. The results demonstrate that the dynamic soil properties in four seasons can change greatly. Firstly, the dynamic triaxial experiments were performed to obtain the dynamic stress-strain curve, elastic modulus, and damping ratio of soil, under different confining pressures and temperatures. Then, the experiments also obtain the dynamic cohesion and internal friction angle of the clay under the initial strain, and the changing rule was summarized. Finally, the results show that the dynamic elastic modulus and dynamic cohesion will increase significantly when the clay is frozen; as the temperature continues to decrease, this increasing trend will gradually slow down, and the dynamic damping ratio will go down when the freezing temperature decreases. In this paper, the change mechanism is objectively analyzed, which verifies the reliability of the conclusions obtained from the experiment.

THE EFFECT OF SOME CANAL PREPARATION TECHNIQUES ON THE SHAPE OF ROOT CANALS (수종의 근관형성 방법이 근관 형태에 미치는 영향)

  • Lee, Ji-Hyeon;Cho, Yong-Bum
    • Restorative Dentistry and Endodontics
    • /
    • v.24 no.2
    • /
    • pp.337-345
    • /
    • 1999
  • The purpose of this study was to compare the shape of root canal after instrumentation with some engine driven NiTi files. Thirty narrow and curved canals(15-35 degree) of mesial canals of extracted human mandibular first molars were divided into three groups. Group 1: After radicular access with Gates Glidden drill, apical shaping using step back method with Flexo file Group 2: After radicular access with Gates Glidden drill, apical shaping with Profile .04 Group 3: Canal shaping with GT file and Profile .04. Using modified Bramante technique, the root was sectioned at 2 mm from apical foramen, height of curvature, 2 mm from canal orifice. Canal centering ratio, amount of transport, amount of dentin removed, shape of canal were measured and statistical analysis is done using SPSS Program V 7.5. The results were as follows: 1. Canal centering ratio of group 3 was the lowest at coronal part, but there was no statistical difference. Centering ratio of group 2 was the lowest at curve part, and there was statistical difference between group 1(P<0.05). Centering ratio of group 2 was the lowest at apical part, but there was no statistic difference. 2. Amount of transport of group 3 was the lowest at coronal part, but there was no statistical difference. Amount of transport of group 2 was the lowest at curve part, and there was statistical difference between group 1(P<0.05). Amount of transport of group 3 was the lowest at apical part, and there was statistical difference between group 1 and group 2, group 1 and group 3(P<0.05). 3. Amount of dentin removed of group 3 was the lowest at coronal part, bur there was no statistical difference. Amount of dentin removed of group 2 was the lowest at curve part, but there was no statistical difference. Amount of dentin removed or group 2 was the lowest at apical part, and there was statistical difference between group 1 and group 2, group 1 and group 3(P<0.05). 4. The shape of the canals after instrumentation varied among the groups. The majority of canals at coronal and curve part for group 1 were round in shape(7 in 10), those at apical part were oval(8 in 10). The majority of canals at coronal part for group 2 were round in shape(7 in 10) and there was no difference in the number of shape at other part. There was no difference in the number of shape at every part for group 3. As above results, NiTi rotary instrumentation showed a trend to remain more centered in the canal than SS file instrumentation. At using NiTi file, coronal shaping with Gates Glidden drill was not statistically different from shaping with GT file. But shaping with GT file showed tapered canals, so it may be said that shaping with GT file is a safe and valuable instrumentation method.

  • PDF

Genetic parameters of milk and lactation curve traits of dairy cattle from research farms in Thailand

  • Pangmao, Santi;Thomson, Peter C.;Khatkar, Mehar S.
    • Animal Bioscience
    • /
    • v.35 no.10
    • /
    • pp.1499-1511
    • /
    • 2022
  • Objective: This study was aimed to estimate the genetic parameters, including genetic and phenotypic correlations, of milk yield, lactation curve traits and milk composition of Thai dairy cattle from three government research farms. Methods: The data of 25,789 test-day milk yield and milk composition records of 1,468 cattle from lactation 1 to 3 of Holstein Friesian (HF) and crossbred HF dairy cattle calved between 1990 and 2015 from three government research farms in Thailand were analysed. 305-day milk yield was estimated by the Wood model and a test interval method. The Wood model was used for estimating cumulative 305-day milk yield, peak milk yield, days to peak milk yield and persistency. Genetic parameters were estimated using linear mixed models with herd, breed group, year and season of calving as fixed effects, and animals linked to a pedigree as random effects, together with a residual error. Univariate models were used to estimate variance components, heritability, estimated breeding values (EBVs) and repeatability of each trait, while pairwise bivariate models were used to estimate covariance components and correlations between traits in the same lactation and in the same trait across lactations. Results: The heritability of 305-day milk yield, peak milk yield and protein percentage have moderate to high estimates ranging from 0.19 to 0.45 while days to peak milk yield, persistency and fat percentage have low heritability ranging from 0.08 to 0.14 in lactation 1 cows. Further, heritability of most traits considered was higher in lactation 1 compared with lactations 2 and 3. For cows in lactation 1, high genetic correlations were found between 305-day milk yield and peak milk yield (0.86±0.07) and days to peak milk yield and persistency (0.99±0.02) while estimates of genetic correlations between the remaining traits were imprecise due to the high standard errors. The genetic correlations within the traits across lactation were high. There was no consistent trend of EBVs for most traits in the first lactation over the study period. Conclusion: Both the Wood model and test interval method can be used for milk yield estimates in these herds. However, the Wood model has advantages over the test interval method as it can be fitted using fewer test-day records and the estimated model parameters can be used to derive estimates of other lactation curve parameters. Milk yield, peak milk yield and protein percentage can be improved by a selection and mating program while days to peak milk yield, persistency and fat percentage can be improved by including into a selection index.

Analysis of the effect of climate change on IDF curves using scale-invariance technique: focus on RCP 8.5 (Scale-Invariance 기법을 이용한 IDF 곡선의 기후변화 영향 분석: RCP 8.5를 중심으로)

  • Choi, Jeonghyeon;Lee, Okjeong;Kim, Sangdan
    • Journal of Korea Water Resources Association
    • /
    • v.49 no.12
    • /
    • pp.995-1006
    • /
    • 2016
  • According to 5th IPCC Climate Change Report, there is a very high likelihood that the frequency and intensity of extreme rainfall events will increase. In reality, flood damage has increased, and it is necessary to estimate the future probabilistic design rainfall amount that climate change is reflected. In this study, the future probabilistic design precipitation amount is estimated by analyzing trends of future annual maximum daily rainfall derived by RCP 8.5 scenarios and using the scale-invariance technique. In the first step, after reviewing the time-scale characteristics of annual maximum rainfall amounts for each duration observed from 60 sites operating in Korea Meterological Administration, the feasibility of the scale-invariance technique are examined using annual daily maximum rainfall time series simulated under the present climate condition. Then future probabilistic design rainfall amounts for several durations reflecting the effects of climate change are estimated by applying future annual maximum daily rainfall time series in the IDF curve equation derived by scale-invariance properties. It is shown that the increasing trend on the probabilistic design rainfall amount has resulted on most sites, but the decreasing trend in some regions has been projected.

A Cohort Study of Physical Activity and All Cause Mortality in Middle-aged Men in Seoul (서울시 중년남성에서 육체적 활동량이 총 사망률에 미치는 영향에 관한 코호트 연구)

  • Kim, Dae-Sung;Koo, Hye-Won;Kim, Dong-Hyon;Bae, Jong-Myon;Shin, Myung-Hee;Lee, Moo-Song;Lee, Chung-Min;Ahn, Yoon-Ok
    • Journal of Preventive Medicine and Public Health
    • /
    • v.31 no.4 s.63
    • /
    • pp.604-615
    • /
    • 1998
  • Although previous studies revealed the association of physical activity with mortality rate, it is unclear whether there is a linear trend between physical activity and mortality rate. In this study, the association of physical activity with the risk of all-cause mortality was analysed using Cox's proportional hazard model for a cohort of 14,204 healthy Korean men aged 40-59 years followed up for 4 years(Jan. 1993-Dec. 1996). Physical activity and other life style were surveyed by a postal questionnaire in December 1992. Total of 14,204 subjects were grouped into quartiles by physical activity. Using death certificate data, 123 deaths were identified. The second most active quartile had a lowest mortality .ate with relative risk of 0.44(95% C.I. : 0.23-0.84) compared with most sedentary quartile, showing a J-shape pattern of physical activity-mortality curve. By examining the difference in proportion of cause of the death between most active quartile and the other quartiles, there was no significant difference of proportional mortality from cardiovascular deaths, cerebrovascular deaths or deaths from trauma. The covariates were stratified into two group between which the trend of RR was compared to test the effect modification. There was no remarkable effect modification by alcohol intake, smoking, body mass index, calorie consumption, percent fat consumption. In conclusion, moderate activity was found to have more protective effect on all-cause mortality than vigorous activity and that the J-shape pattern of physical activity-mortality curve was not due to the difference of mortality pattern or effect modification by alcohol intake, smoking, body mass index, calorie consumption and percent fat consumption.

  • PDF

A Study on the Lateral Behavior of Steel Pipe Piles in Centrifugal Test (원심모형실험에 의한 강관말뚝의 수평거동연구)

  • Kim, Yeong-Su;Seo, In-Sik;Kim, Byeong-Tak
    • Geotechnical Engineering
    • /
    • v.12 no.6
    • /
    • pp.5-20
    • /
    • 1996
  • This paper presents results from a series of model tests on laterally loaded single piles with both free-head and free-tip conditions. Model tests, using a centrifuge apparatus (middie size, Mark II in 7.1.7.) were carried out in sand based on the variation of different gravity acceleration and flexural stiffness of the pile and relative density of the soil. The aims of this study are to estimate the effect of gravity acceleratioil, flexordis stiffness, and relative density on the behavior of the pile embedded in Toyoura sand and to evaluate the applicability of a family of the p-y curves which was presented by several reseachers(Mur chison & O'Neill, neese et n., scott, Det worske veritas, nondner). The Program is deviloped by using p-y curves, and it can be used for the calculation of the displacement distri bution, bending moment distribution, and soil reaction distribution. By comparing meas ured responses with predicted one it is shown that the results of the p-y curve equation presented by Murchison & O'Neill and Kondner agreed with the general trend observed by the centrifuge tests much better than the numerical solutions predicted by the other sets of p -y curves.

  • PDF

The growth stage study on the femur and tibia of Korean native chicken after hatching (한국 재래닭의 부화 후 성장단계별 넙다리뼈와 정강뼈 성장에 관한 연구)

  • Tae, Hyun-Jin
    • Korean Journal of Veterinary Service
    • /
    • v.38 no.3
    • /
    • pp.181-188
    • /
    • 2015
  • Skeletal development of chicken has been widely discussed in industrial forums and various research reports. However, these studies were emphasis on the commercial chicken strains for improve egg and meat production whereas the skeletal quiet remains as a potential weak link related to facilitating in the physical support of heavier carcasses at ever younger ages. For that, the study of standardization of skeletal development is important but it was rarely reported in Korean native chicken (KNC). The study was investigated the skeletal characteristics of KNC for international standardization. We studied in KNC at 2, 14, 28, 42, 56, 70, 84, 98, 112, 126, 147, 168, 196, 224, 336 and 448 days after hatch (male and female, n=13 for each group). We measured the body weight (BW), and after sacrifice measured organs and remove muscle from femur & tibia and measured bone weight. Data were analyzed by ANOVA, Duncan test, correlation analysis and regression analysis of SAS 9.1. We analyzed the data of BW, femur & tibia and made growth curve also. The BW was significantly increased up to 147 days after hatch (male, $1,927.88{\pm}68.92g$; female, $1,456.00{\pm}50.11g$), and then increased gradually. At 336 days, these growth was stop (male, $2,467.00{\pm}42.84g$; female, $1,568.71{\pm}62.62g$). The growth of femur & tibia length and width was stop on 98~126 days after hatch. At 98 days, we measured the length and width of femur & tibia in male were $132.39{\pm}3.18mm$ & $25.98{\pm}0.59mm$ whereas in female at 112 days the length of femur & tibia was $116.40{\pm}1.55mm$ and at 126 days width was $21.41{\pm}0.38mm$. Our study suggests that the growth of male KNC was classified pre-puberty (0~98 days), puberty (98~336 days) and maturity (after 336 days), meanwhile female was shown similar trend however puberty period of KNC was 112 or 126 days after hatch.

Design of Digital Media Protection System using Elliptic Curve Encryption (타원 곡선 암호화를 이용한 영상 저작권 보호 시스템 설계)

  • Lee, Chan-Ho
    • Journal of the Institute of Electronics Engineers of Korea SD
    • /
    • v.46 no.1
    • /
    • pp.39-44
    • /
    • 2009
  • The advance of communication and networking technology enables high bandwidth multimedia data transmission. The development of high performance compression technology such as H.264 also encourages high quality video and audio data transmission. The trend requires efficient protection system for digital media rights. We propose an efficient digital media protection system using elliptic curve cryptography. Only key parameters are encrypted to reduce the burden of complex encryption and decryption in the proposed system, and the digital media are not played back or the quality is degraded if the encrypted information is missing. We need a playback system with an ECC processor to implement the proposed system. We implement an H.264 decoding system with a configurable ECC processor to verify the proposed protection system We verify that the H.264 movie is not decoded without the decrypted information.

Functional clustering for electricity demand data: A case study (시간단위 전력수요자료의 함수적 군집분석: 사례연구)

  • Yoon, Sanghoo;Choi, Youngjean
    • Journal of the Korean Data and Information Science Society
    • /
    • v.26 no.4
    • /
    • pp.885-894
    • /
    • 2015
  • It is necessary to forecast the electricity demand for reliable and effective operation of the power system. In this study, we try to categorize a functional data, the mean curve in accordance with the time of daily power demand pattern. The data were collected between January 1, 2009 and December 31, 2011. And it were converted to time series data consisting of seasonal components and error component through log transformation and removing trend. Functional clustering by Ma et al. (2006) are applied and parameters are estimated using EM algorithm and generalized cross validation. The number of clusters is determined by classifying holidays or weekdays. Monday, weekday (Tuesday to Friday), Saturday, Sunday or holiday and season are described the mean curve of daily power demand pattern.

Sensitivity of Seepage Behavior of Dam to Unsaturated Soil Properties (불포화 수리특성에 대한 댐체 침투 거동의 민감도 분석)

  • Cho Sung-Eun
    • Journal of the Korean Geotechnical Society
    • /
    • v.21 no.3
    • /
    • pp.119-131
    • /
    • 2005
  • Seepage analysis through unsaturated zone based on the theory of unsaturated flow is commonly performed to evaluate dam safety. However, the concepts of unsaturated soil behavior have not been transferred into the hands of practicing geotechnical engineers since the problems involving unsaturated soils often have the appearances of being extremely complex. The behavior of dam such as seepage rate and the pore water pressure distribution is different according to the unsaturated hydraulic properties, but nevertheless simply assumed properties have been used due to insufficient data from domestic soils. In this paper, the effect of unsaturated hydraulic properties on the behavior of dam was studied through a series of numerical analyses, and then the results were discussed. It is observed that water table moves at a (aster rate, as the values of unsaturated soil parameter a and n increase. The value of m showed opposite trend. The sensitivity calculated using the approximation form showed maximum values near the water table. And the value of n that is related to the slope of soil water characteristic curve gives greatest influence on the change of sensitivity with time.