• Journal of Conservation Science
• /
• v.26 no.3
• /
• pp.229-245
• /
• 2010

The pupose of this study was to identify the material characteristics, firing environments and making techniques for the jar coffins from the Oryangdong kiln site and the Ungokdong tomb site in Naju. All jar coffins had very similar physical, mineralogical and geochemical characteristics, although it was excavated from the different sites. The wall thickness of the jar coffins was about 2.3 to 5.3 cm. Under the microscopy, the jar coffins include a large quantity of various quartz with some microcrystalline and showed partly orthoclase and biotite. It is presumed that the mineral sherds added to maintain the thick wall and to control the percentage of contraction during drying and firing of jar coffins and it has contained about 11.4 to 19.8 %. Firing temperature of the jar coffins is estimated as 1,000 to $1,150^{\circ}C$. Also, all jar coffins and soils show similar geochemical behavior of elements and clay-mineralization degree within the site. This indicates making that the soil is probable to be a raw material of the jar coffins. But it shows different characteristics in major elements of soils which is collected at the kiln floor and the trench region of the Oryangdong kiln site because of the lack of quartz and feldspar in the soils. Therefore, it can use of the jar coffins making clay, if it goes through a simple special process such as mixing temper.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.1 no.2
• /
• pp.120-126
• /
• 2006

In this paper, we propose for improving QoS in hospital wireless network using Cellular-IP/PRC(Paging Route Cache) with Paging Cache and Route Cache in Cellular-IP. Although the Cellular-IP/PRC technology is devised for mobile internet communication, it has its vulnerability in frequent handoff environment. This handoff state machine using differentiated handoff improves quality of services in Cellular-IP/PRC. Suggested algorithm shows better performance than existing technology in wireless mobile internet communication environment. When speech quality is secured considering increment of interference to receive in case of suppose that proposed acceptance method grooves base radio station capacity of transfer node is plenty, and most of contiguity cell transfer node was accepted at groove base radio station with a blow, groove base radio station new trench lake acceptance method based on transmission of a message electric power estimate of transfer node be. Do it so that may apply composing PC(Paging Cache) and RC(Routing Cache) that was used to manage paging and router in radio Internet network in integral management and all nodes as one PRC(Paging Router Cache), and add hand off state machine in transfer node so that can manage hand off of transfer node and Roaming state efficiently, and studies so that achieve connection function at node. Analyze benevolent person who influence on telephone traffic in system environment and forecasts each link currency rank and imbalance degree, forecast most close and important lake interception probability and lake falling off probability, GoS(Grade of Service), efficiency of cell capacity in QoS because applies algorithm proposing based on algorithm use gun send-receive electric power that judge by looking downward link whether currency book was limited and accepts or intercept lake and handles and displays QoS performance improvement.

• Journal of the Korean Institute of Gas
• /
• v.21 no.5
• /
• pp.95-103
• /
• 2017

A lot of hazardous materials have been used for product processing and utility plant. Many accidents including toxic release, fire and explosions occur in the ammonia related facility and plant. Various safety and environment management program including PSM, SMS, ORA etc. are being implemented for risk management and accident prevention in the production industry. Also much study and research have been carried about risk assessment of accident scenario in the academic and research area. In this paper, firstly risk level was assessed by using a typically used KORA program and LOPA PFD method for the selected ammonia unloading and storage facility. And then risk reduction measures for the risk assessed facility were studied in 3 aspects and some measures were proposed. Those Risk Reduction measures are including a leak detection and emergency isolation, water spray, dilution tank, dike and trench, scattering protection in hardware impovement aspect, and a applicable risk criteria, conditional modifier for existing LOPA PFD, alternative supporting modeling program in risk estimation methodology aspect, and last RBPS(Risk Based Process Safety) program, re-doing of process hazard analysis, management system compliance audit in managerial activity aspect.

• Economic and Environmental Geology
• /
• v.33 no.2
• /
• pp.91-100
• /
• 2000

It has been more than ten years since Dukun mine was abandoned. Tailings of waste deposits and slime dumps in the abandoned Dukum mine have been left to be deserted for fifty years. The results of fifty years of neglecting are nothing short of major environmental problems. Slime dumps have been exposed to air and water in the mine over ten years and then soil profile has been formed well. Soil in the upper layer (A horizon) is the light gray color due to the leaching of cations. Soil in the lower layer (A2 horizon, 0.2∼0.3m)is tinted with reddish brown and yellowish brown color due to the development of iron oxides and iron hydroxides. Soil in the lower part of B horizon of (1.0∼3.0m) with the growth of copper and zinc oxides exposes to the bluish green, light blue, and dark gray. Ranging from 3m to 8m in depth, 85 samples were taken from 22 sampling sites with 50m intervals located on the slime dump area with hand auger and trench (open cut). As tailings was distributed, heavy metal elements extracted by the process of surface water and ground water move and disperse in to the hydrosphere. Waste dumps were distributed in and around the mine and water draining from those dumps be a potential source of contamination. Soils, thus, can be dispersed into downslope and downstream through wind and water by clastic movement. These materials may be deposited in another horizon if the water is withdrawn, or if the materials are precipitated as a result of differences in pH, or other conditions in deeper horizons. These were primarily associated with acid mine drainage. The characteristics and rate of release of acid mine drainage are influenced by various chemical and biological reactions at the source of acid generations. Prolonged extration of heavy metal elements has a detrimental effect on the agricultural land and residental area. Twenty soil samples were collected from the agricultural land in the area (0∼30 cm). Seventeen samples were also taken from the sediment in the stream running alongside the dumps. The dispersion patterns of heavy metal elements are as follows: The content of As ranged 2∼6 ppm in a horizon, 20∼125 ppm in B horizon with large amount of clay mineral is concentrated and the content of Cd ranged 1∼2 ppm in A horizon, 4∼22 ppm in B horizon. Like Cd, the content of As, Cu, Zn, Pb in B horizon is higher than that in A horizon (approximately 5∼100 times). When soil formation proceeds in stages, it is necessary to investicate the B horizon with the concentration of heavy metal and preventive measures will have to established.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.9 no.1
• /
• pp.49-62
• /
• 2011

Recently, International Atomic Energy Agency and major leading countries in radioactive waste management tend to subdivide the categories of radioactive waste based upon risk-graded approach. In this context, the category of very low level waste has been newly introduced, or optimized management options for this kind of waste have been pursued in many countries. The application of engineered surface landfill type facilities dedicated to dispose of very low level waste has been gradually expanded, and it was analyzed that their design concept of isolation has been much advanced than those of the old fashioned surface trench-type disposal facilities for low and intermediate level waste, which were usually constructed in 1960's. In addition, the management options for very low level waste in major leading countries are varied depending upon and interfaced with the affecting factors such as: national framework for clearance, legal and practical availability of low and intermediate level waste repository and/or non-nuclear waste landfill, public acceptance toward alternative waste management options, and so forth. In this regard, it was concluded that optimized long-term management options for very low level waste in Korea should be also established in a timely manner through comprehensive review and discussions, in preparation of decommissioning of large nuclear facilities in the future, and be implemented in a systematic manner under the framework of national policy and management plan for radioactive waste management.

• Proceedings of the Korean Society of Grassland Science Conference
• /
• 2002.09b
• /
• pp.5-56
• /
• 2002

The problems in the current domestic forage production were evaluated, and the prospective improvement was suggested in this paper. Grassland development in forest, production of high quality forages in upland and paddy land, efficient utilization of rice straw, development of new varieties of forages suitable for our environmental conditions and imported forages were described Among them, preferential production and utilization of forages using paddy field after rice harvest . should be enlarged for domestic supply of forages in Korea. Several studies were carried out to select the promising forage crops and barley cultivars for whole crop silage production, to determine productivity, nutritive value and production cost of forages produced in paddy field, and feeding effect of forages with Hanuwoo and milking cow for whole crop silage with forages produced in paddy field, 1999 to 2001, and also discussed restraint factors and activation plans for enlargement of forage production in paddy land. The promising forage crops in paddy field were rye and barley for Middle region, and rye, barley, early maturing Italian ryegrass and wheat for Southern region. The promising barley cultivars for whole crop silage in paddy field were Albori in Suwon, Keunalbori, Milyang 92, Saessalbori, and Naehanssalbori in Iksan, and Keunalbori, Albori, Naehanssalbori, and Saegangbori in Milyang, respectively. Silage production, quality and animal palatability of silage by trench and round bale were also compared. The production yields of whole crop barley silage(WBS) were 17,135kg as a fresh matter, and 6,011kg as a dry matter per ha, and the quality of WBS was 2∼3 grade, while that of rice straw silage was 4 grade as a farm basis. The production cost of WBS per kg was 83won as a fresh matter, and 238won as a dry matter. Feeding of WBS as forages on Hanwoo was very desirable for the improvement of live-weight gain, beef quality and farm income, particularly in growing stage of Hanwoo. Milk production and income were also increased, and feed cost was decreased by feeding of WBS. The daily voluntary intake of WBS in milking cow was 26.3kg as a fresh matter(DM 7.7kg) per head. Milk production when WBS was fed, was very similar to that of imported hay feeding such as Kentucky bluegrass or domestic corn silage. The issues to be solved in near future f3r stable forage production and supply in paddy land are sustainable livestock-forages policy, development & seed production of new varieties of barley, rye, Italian ryegrass and other promising forages, efficient demand & supply system of forages, solidification for mass production and utilization of forages, efficient application management of animal slurry on paddy field considering environmental agriculture/livestock industry, and break k development of bottleneck technique in production field. Domestic production & supply of high cost agricultural machine (round baler, wrapper, handler and so on), plastic wrapping film, and silage additives are also important.

• The Journal of the Petrological Society of Korea
• /
• v.21 no.2
• /
• pp.173-192
• /
• 2012

Previous age data were reviewed for 98 sites of Phanerozoic granitoids in the southern part of the Korean Peninsula. Subduction-related granitic magmatism has occurred in southeastern Korea since Early Permian. In the middle part of the Yeongnam massif, arc-related tonalites, trondhjemites, granodiorites, and monzonites were emplaced during Early Triassic. After Middle Triassic continental collision in central Korean Peninsula, post-collisional shoshonitic and high-K series and A-type granitoids were emplaced in the southwestern Gyeonggi massif and central Okcheon belt during Late Triassic. Early Jurassic calc-alkaline granitoids are mostly distributed in the middle part of the Yeongnam massif and Mt. Seorak area, northeastern Gyeonggi massif. On the other hand, Middle Jurassic calc-alkaline granitoids pervasively occur in the Okcheon belt and central Gyeonggi massif. This selective distribution could be attributed to the change in the position of trench, subduction angle, or the direction of subduction. Most Cretaceous and Paleogene granitoids are distributed in the Gyeongsang basin, with the latter emplaced exclusively along the eastern coastline. Outside the Gyeongsang basin, Cretaceous granitoids emplaced in relatively shallow depth occur in the Gyeonggi massif and central Okcheon belt.

• The korean journal of orthodontics
• /
• v.25 no.5 s.52
• /
• pp.511-523
• /
• 1995

The elastic open activator is one of the modified myodynamic activator. The reduced size of the appliance mass motivates the patients' comfort and longer time of wearing. Its peculiarities in loose fitting and the lack of appliance stabilization in the mouth draws the tongue and the surrounding functional matrices on close interaction with the appliance, consigns the physiologic exertion to target structures, and eventually makes it feasible to the inland of non-extraction treatment In the context of the sagittal malocclusion, the orthodontic trench is dependent upon the growth of basal structure aimed, therefore, it is contemplated to grabble the effects of Elastic Open Activator upon the class II malocclusion of growing child retrospectively. The cephalometric headfilms and study models of nine Class II malocclusion of growing child retrospectively. The cephalometric headfilms and study models of nine class II division 1 and five division 2 patients were evaluated and analyzed, and the following observations were drawn, 1. The maxilla maintained a normal growth pattern in both groups. 2. The mandible grew anteroinferiorly in both groups. 3. The upper incisors tipped ligually in Class II division 1 and tipped labially in Class II division 2 and anterior vertical alveolar growth was interrupted in both groups. 4. The lower incisors tipped labially. 5. There was an arch expansion in both groups and increase of available space in Class II division 2

• Journal of the Korea Concrete Institute
• /
• v.17 no.3 s.87
• /
• pp.329-334
• /
• 2005

The use of Polymer Concrete (PC) is growing very rapidly in many structural and construction applications such as box culverts, hazardous waste containers, trench lines, floor drains and the repair and overlay of damaged cement concrete surfaces in pavements, bridges, etc. However, PC has a defect economically because resin which be used for binder is expensive. Therefore the latest research is being progressed to replace existing resin with new resin which can reduce the high cost. Here, Polymer concrete using the recycled PET(polyethylene terephthalate) has some merits such as decrease of environmental destruction, decrease of environmental pollution and development of new construction materials. The variables of this study are amount of resin, curing condition and maximum size of coarse aggregate to find out mechanic properties of this. Stress-strain curve was obtained using MTS equipment by strain control. The results indicated that modulus of elasticity was increased gradually in an ascending branch of curve, as an increase of resin content. Compressive strength was the highest for resin content of $13\%$. And Compressive strength was increased as maximum size of coarse aggregate increases. The strain at maximum stress increases with an increase of resin content and size of coarse aggregate. For the descending branch of stress-strain curve the brittle fracture was decreased when it was cured at the room temperature compared to high temperature.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.37 no.6
• /
• pp.43-49
• /
• 2000

The TiN thin films were deposited by ALE(atomic layer epitaxy) on (100) silicon substrate. The TiN thin films were characterized by means of XRD, 4-point probe, AFM, AES and SEM. TEMAT(terakis(ethyl methy lamino)titanium) and $NH_3$ were injected into the reactor in sequence of TEMAT-$N_2-NH_3-N_2$ to ensure a saturated surface reaction. As a result, the depostion rate of the TiN film was controlled by self-limiting growth mechanism at temperature range form 150 to 220 $^{\circ}C$. Deposited TiN films, all of which show amorphous structure, had a fixed deposition rate of 4.5 ${\AA}$/cycle. The resistivity of 210 ~ 230 ${\mu}{\Omega}{\cdot}$cm and the surface r.m.s. roughness of 7.9 ~ 9.3 ${\AA}$ were measured. When TiN film of 2000 ${\AA}$ were deposited, a excellent step coverage were observed in a trench structure of 0.43${\mu}m$ contacts with 6:1 aspect ratio.