• Journal of Korean Society of Forest Science
• /
• v.33 no.1
• /
• pp.33-58
• /
• 1977

A bark comprises about 10 to 20 percents of a typical log by volume, and is generally considered as an unwanted residue rather than a potentially valuable resourses. As the world has been confronted with decreasing forest resources, natural resources pressure dictate that a bark should be a raw material instead of a waste. The utilization of the largely wasted bark of genus Pinus, Quercus, and Populus grown in Korea can be enhanced by learning its physical and mechanical properties. However, the study of tree bark grown in Korea have never been undertaken. In the present paper, an investigative study is carried out on the bark of three genus, eleven species representing not only the major bark trees but major species currently grown in Korea. For each species 20 trees were selected, at Suweon and Kwang-neung areas, on the same basis of the diameter class at the proper harvesting age. One $200cm^2$ segment of bark was obtained from each tree at brest height. Physical properties of bark studied are: bark density, moisture content of green bark (inner-, outer-, and total-bark), fiber saturation point, hysteresis loop, shrinkage, water absorption, specific heat, heat of wetting, thermal conductivity, thermal diffusivity, heat of combustion, and differential thermal analysis. The mechanical properties are studied on bending and compression strength (radial, longitudinal, and tangential). The results may be summarized as follows: 1. The oven-dry specific gravities differ between wood and bark, further more even for a given bark sample, the difference is obersved between inner and outer bark. 2. The oven-dry specific gravity of bark is higher than that of wood. This fact is attributed to the anatomical structure whose characters are manifested by higher content of sieve fiber and sclereids. 3. Except Pinus koraiensis, the oven-dry specific gravity of inner bark is higher than that of outer bark, which results from higher shrinkage of inner bark. 4. The moisture content of bark increases with direct proportion to the composition ratio of sieve components and decreases with higher percent of sclerenchyma and periderm tissues. 5. The possibility of determining fiber saturation point is suggested by the measuring the heat of wetting. With the proposed method, the fiber saturation point of Pinus densiflora lies between 26 and 28%, that of Quercus accutissima ranges from 24 to 28%. These results need be further examined by other methods. 6. Contrary to the behavior of wood, the bark shrinkage is the highest in radial direction and the lowest in longitudinal direction. Quercus serrata and Q. variabilis do not fall in this category. 7. Bark shows the same specific heat as wood, but the heat of wetting of bark is higher than that of wood. In heat conductivity, bark is lower than wood. From the measures of oven-dry specific gravity (${\rho}d$) and moisture fraction specific gravity (${\rho}m$) is devised the following regression equation upon which heat conductivity can be calculated. The calculated heat conductivity of bark is between $0.8{\times}10^{-4}$ and $1.6{\times}10^{-4}cal/cm-sec-deg$. $$K=4.631+11.408{\rho}d+7.628{\rho}m$$ 8. The bark heat diffusivity varies from $8.03{\times}10^{-4}$ to $4.46{\times}10^{-4}cm^2/sec$. From differential thermal analysis, wood shows a higher thermogram than bark under ignition point, but the tendency is reversed above ignition point. 9. The modulus of rupture for static bending strength of bark is proportional to the density of bark which in turn gives the following regression equation. M=243.78X-12.02 The compressive strength of bark is the highest in radial direction, contrary to the behavior of wood, and the compressive strength of longitudinal direction follows the tangential one in decreasing order.

• Journal of the Korean Wood Science and Technology
• /
• v.7 no.2
• /
• pp.3-30
• /
• 1979

Larch ($\underline{Larix}$ $\underline{leptolepis}$ GORDON), one of the major afforestation species in Korea in view of its growing stock and rate of growth, is not favored as a raw material for pulp due to its low yield of pulp and difficulties with bleaching arising from the high content of extractives in wood, and the high heartwood ratio and the active phenolics, respectively. The purpose of this study is to investigate the characteristics of firstly pulping with various additives of cellulose protector for the yield of pulp, and secondly bleaching with oxygen for chlotination-alkali extraction of five stage-sequence to reduce chlorine compounds in bleaching effluents. The kraft cooking liquor for five age groups of larchwood was 18 percent active alkali with 25 percent sulfidity and 5 : 1 liquor-to-wood ratio, and each soda liquor for sap-and heart-wood of the 15-year-old larchwood was 18 percent alkali having one of the following cellulose protectors as the additive; magnesium sulfate ($MgSO_4$, 2.5%), zinc sulfate ($ZnSO_4$, 2.5%), aluminium sulfate ($Al_2(SO_4)_3$, 2.5%), potasium iodide (KI, 2.5%), hydroquinone (HQ, 2.5%), anthraquinone (AQ, 0.1%) and ethylene diamine (EDA, 2.5%). Then each anthraquinone-soda liquor for the determination of suitable cooking condition was the active alkali level of 15, 17 and 19 percent with 1.0, 0.5 and 0.1 percent anthraquinone, respectively. The cooking procedure for the pulps was scheduled to heat to 170$^{\circ}C$ in 90 minutes and to cook 90 minutes at the maximum temperature. The anthraquinone-soda pulps from both heartwood and sapwood of 15-year-old larchwood prepared with 0.5 percent anthraquinone and 18 percent active alkali were bleached in a four-stage sequency of OCED. (O: oxygen bleaching, D: chlorine dioxide bleaching and E: alkali extraction). In the first stage oxygen in atmospheric pressure was applied to a 30 percent consistency of pulp with 0.1 percent magnesium oxide (MgO) and 3, 6, and 9 percent sodium hydroxide on oven dry base, and the bleached results were compared pulps bleached under the conventional CEDED (C: chlorination). The results in the study were summarized as follows: 1. The screened yield of larch kraft pulp did not differ from particular ages to age group, but heartwood ratio, basic density, fiber length and water-extractives contents of wood and the tear factor of the pulp increased with increasing the tree age. The total yield of the pulp decreased. 2. The yield of soda pulp with various chemicals for cellulose protection of the 15-year-old larchwood increased slightly more than that of pure soda pulp and was slightly lower than that of kraft pulp. The influence of cellulose protectors was similar to the yield of pulps from both sapwood and heartwood. The effective protectors among seven additives were KI, $MgSO_4$ and AQ, for which the yields of screened pulp was as high as that of kraft pulp. Considering the additive level of protector, the AQ was the most effective in improving the yield and the quality of pulp. 3. When the amount of AQ increased in soda cooking, the yield and the quality of the pulp increased but rejects in total yield increased with decreasing the amount of active alkali from 19 to 15 percent. The best proportion of the AQ seemed to be 0.5 percent at 17 percent active alkali in anthraquinone-soda pulping. 4. On the bleaching of the AQ-soda pulp at 30 percent consistency with oxygen of atomospheric pressure in the first stage of the ODED sequence, the more caustic soda added, the brighter bleached pulp was obtained, but more lignin-selective bleaching reagent in proportion to the oxygen was necessary to maintain the increased yield with the addition of anthraquinone. 5. In conclusion, the suitable pulping condition for larchwood to improve the yield and quality of the chemical pulp to the level for kraft pulp from conventional process seemed to be. A) the selection of young larchwood to prevent decreasing in yield and quality due to the accumulation extractives in old wood, B) the application of 0.5 percent anthraquinone to the conventional soda cooking of 18 percent active alkali, and followed, C) the bleaching of oxygen in atmospheric pressure on high consistency (30%) with 0.1 percent magnesium oxide in the first stage of the ODED sequence to reduce the content of chlorine compounds in effluent.

• Journal of the Korean Graphic Arts Communication Society
• /
• v.30 no.3
• /
• pp.89-114
• /
• 2012

For as to world, the concern about the environment problem is enhanced than any other time in the past because of being 21 century. And the environment problem is highlighted as the world-wide issue. The time of the environment problem intimidates the alive of the mankind and presence of an earth over the time. It becomes the essentiality not being selection in the personal living or the economical viewpoint now to prepare for the climatic modification. As to the company management, the green growth period which it excludes the environment management considering an environment, cannot carry on the company the continued management comes. That is, in the change center of the management paradigm, there is the environment management. Nearly, the greenhouse gas which the publication industry is the environmental toxic material like all industries is generated. The greenhouse gas is ejected in the process of running the manufacturing process and print shop of the various kinds material used as the raw material of the book. Particularly, the tree felling for getting the material of the paper is known to reach the direct influence on the global warming. This study does according to an object it considers and organizes the environment parameter based on this kind of fact as to the publication industry. And it is determined as the reference which is used as the basic materials preparing the case that carbon exhaust right transaction(CAP and TRADE) drawing are enforced in all industries and is sustainable the management of the publication industry and reduces the environmental risk among the company many risk management elements and plans and enforces the publication related policy that there is a value. In the printing publication industry, this study tried to inquire into elements discharging the environmental pollutant or the greenhouse gas. Additionally, in the printed publication production process, it tried to inquire into the effort for an environment-friendly and necessity at the printing paper and the printers ink, regarded as the element discharging the greenhouse gas all kinds of the printing materials, operation of the print shop and all kinds of the machines and recycle process, and etc. These considerations make these industrial field employees aware of the significance about a conservation and environmental protection. They try to give a help in the subsequent study producing quantitatively each environmental parameter emission of green house gas. This makes the calculation of the relative $CO_2$ output reproached ultimately possible. Meanwhile, in a sense, many research protects and improving an environment in connection with the contents of research at the printing publication industrial field is in progress. There will be the voluntary human face that it has to protect an environment but this can not do by the outside factor according to all kinds of environment related law and regulation. Anyway, because of acting on company management as the factor of oppression, the increase of this environment-related correspondence cost could know that the research that the environment loading relates with a procurement and development, environment management system introduction, quality control standard, including, normalizing including a material, and etc. through the part of the effort to reduce the cost low was actively in progress. As to the green growth era, as follows, this paper prescribed the subject and alternative of the print publication industry. It is surrounded by the firstly new digital environment and the generation of the subject. And secondly the printing industry is caused by the point of time when the green growth leaves by the topic which is largest in the global industry and it increases. The printing publication industry has to prepare the bridgehead for the environment-friendly green growth as the alternative for this resolution with first. The support blown in each industry becomes the obligation not being selection. Prestek in which the print publishing was exposed to spend many energies and which is known as the practice of the sustainable print publishing insisted that it mentioned importance of the green printing through the white pages in 2008 and a company had to be the green growth comprised through the environment-friendly activity. The core management for the sustainable printing publication industry presented from Presstack white pages is compacted to 4 words that it is a remove, reduce, recover, and recycle. Second, positively the digital printing(POD) system should be utilized. In the worldwide print out market, the digital printing area stops at the level of 10% or so but the change over and growth of the market of an analog-to-digital will increase rapidly in the future. As to the CEO Jeff Hayes of the Infoland, the offset print referred to that it of the traditional method got old and infirm with the minor phase of the new printing application like the customer to be wanted publication and the print of the digital method led the market. In conclusion, print publishers have to grasp well the market flow in the situation where a digitalization cannot be generalized and a support cannot avoid. And it keeps pace with the flow of the digital age and the recognition about the effort for the development and environment problem have to be raised. Particularly, the active green strategy is employed for the active green strategy.

• Journal of Veterinary Clinics
• /
• v.32 no.5
• /
• pp.469-472
• /
• 2015

A 10-year-old, castrated poodle dog presented with a cough for 2 weeks, and the cough initially developed since very young age. On radiographs, pneumothorax was noticed by characteristics of radiolucent area without pulmonary markings along the thoracic wall and diaphragm, retracted lung lobes from the thoracic wall and severely decreased volume of the left cranial lung lobe with disconnected bronchus. Computed tomography (CT) findings identified several pulmonary air-filled cysts and collapsed lung with abnormal shape and non-tapered end of bronchus, bronchioles at the accessory lobe and left cranial lobe. Also, pneumothorax, pneumomediastinum and subcutaneous emphysema were found. Imaging diagnosis was the spontaneous pneumothorax caused by ruptured emphysematous bullae associated with congenital bronchial cartilage abnormality or bronchial tree malformation. On surgery, hypoplasia of the left cranial lobe, right middle lobe, and accessory lobe with a bulla where air was leaking was identified. The accessory lobe was partially resected and bronchial cartilage hypoplasia was confirmed by histopathologic examination.

• Journal of the Korean Wood Science and Technology
• /
• v.45 no.5
• /
• pp.525-534
• /
• 2017

The study aims to observe the cellular anatomical properties of Dahurian larch and Japanese larch for the species identification. In addition, other factors - the ring width, tracheid length, density, and strength - were compared and analyzed to clarify their physical and mechanical properties. To the end, three Dahurian larch trees and three Japanese larch trees by each diameter class were collected as specimens from Jeongseon-eup, Jeongseon-gun, Gangwon-do, to conduct a stem analysis. It was found that the average stand age, average diameter at breast height, and average tree height of three Dahurian larch trees and Japanese larch trees were 74 years and 51 years, 442 mm and 352 mm, and 26.1 m and 20.8 m, respectively. The cellular anatomical difference between Dahurian larch and Japanese larch can be usually found by spiral thickening, considering that it doesn't occur in Dahurian larch at all, while rarely does in the ray tracheids of Japanese larch. However, in this study, spiral thickening was not observed in the radial section of Japanese larch. The average annual growth diameters measured at 1.2 m-height of Dahurian larch and Japanese larch were 5.167 mm and 5.954 mm, respectively. Meanwhile, arboreal growth of Japanese larch was observed to be higher than that of Dahurian larch. In the physical properties test, it was measured that the latewood proportion and oven-dry density of Dahurian larch with low annual diameter growth were higher than those of Japanese larch, while the mechanical properties of Dahurian larch wood were measured 2-7% higher than those of Japanese larch wood. The data obtained from this study are expected to be used as the basic reference for species identification between Dahurian larch and Japanese larch by DNA analysis.

• Journal of the Korean Geographical Society
• /
• v.29 no.1
• /
• pp.46-64
• /
• 1994

Among every civilized people salt has been recognized as an essential foodstuff to the human society without which even man's survivor is unthinkable. The cultural-anthropological meaning of salt is estimated highly as well, and in geographical perspective salt itself symbolize regional interrelationship. Playing a decisive role in freeing innermost settlement from isolation, salt aiso made a contribution to expanding human habitats. This study tries to reconstruct historica geography of 18th and 19th century surrounding traditional salt-roasting (chayeom). The Joolpo Inlet area which is located on the mid-western coast in Honem Region is selected for study area. Established on the basis of optimum physical geographical conditions such as topography, climate and vegetation, salt-making of Joolpo Inlet area was run dynamically with the sudden turn of events in the 18-19th century which was chacterized as an age of transition from medieval society to modern one. In this paper the writer attempts to clarify mainly following three points: physical conditions and socio-economic background leading to the initiation and later development of roasting of salt in Joolpo Bay; distribution of saltworks; methods of saltmaking. Main points drawn from these analyses can be summarized as follows: of iron pan and cow-drawn tools rendered labour-saving and output growth. 1, Saltworks of Joolpo Inlet area in the 18-19th century were distributed evenly over Kobu, Puan, Mujang and Heungduck counties among which Kobu's was located in Puanmyon - a sort of exclave. All saltworks belonging to above four counties were clasified as most lucrative ones in Honam Region on government archives. In particular, Gumdang saltwork which belongs to Mujang county is noteworthy in that it was first introduced by one Paekje priest in 6th century and therefore it provides a clue to examine the history of salt-roasting of Joolpo Inlet area. In light of the fact that temple or monastery economy, regardless of East and West, has been closely connected with traditional industry, the case of Gumdang is not unusual. 2. The process of saltmaking follows this order: harrowing of salt field exposed to solar heat; construction of saltern mound with saline earth; acquiring of brine by leaching saline earth; roasting of salt. Salterns (saltworks) are consisted with various salt making facilities such as roasting shed, saltern mound, salt field, salt well) salt pit or brine pit) and seawater reservoir. Among them roasting shed which is constructed chiefly with hundreds of pieces of pine tree as a frame and with straw as roof and wall is customarily considered as an unit of saltwork. And inside it is saltpan made of two kinds of materials, that is iron pan or plaster pan. The area attached to one unit of roasting shed is approximately 1 ha, and that of saltern mound is a tenth of it.

• Journal of Korean Society of Forest Science
• /
• v.104 no.3
• /
• pp.411-420
• /
• 2015

This study examined methods for stand density control by using shape ratio (tree height/DBH) and its application for effective management of Pinus thunbergii coastal disaster prevention forests. We analyzed the present conditions (height, DBH, and density) of P. thunbergii coastal disaster prevention forests at 123 study sites on Jeju Island and west, south, and east coasts of South Korea and compared them with results from previous studies. The average shape ratio for P. thunbergii showed positive correlations with stand density and was significantly higher on the west coast (66.32) than on the south (49.57) and east (48.19) coasts and Jeju Island (48.29). Stands with shape ratio higher than 70 accounted for 50% of the total study sites on the west coast, indicating a decrease in their disaster prevention function compared to that of other previous studies. The stand density in most coastal areas, except the east coast, was significantly higher than the standards recommended by the Korea Forest Service and the Forestry and Forest Products Research Institute of Japan, indicating the need for stand density control. According to the growth estimation equation for P. thunbergii in the coastal area of South Korea, density control is required for young stands less than 14 years old, which show drastic increase in the shape ratio, to conserve their disaster prevention function. Particularly, the first thinning of P. thunbergii forests should be implemented before the stand age of 8 years that a shape ratio exceeds 70. For disaster-prone young stands (${\leq}20cm$ DBH) of P. thunbergii, the stand density was higher in the standard of Japan considering shape ratio than in that of Korea aiming timber production. Hence, the standard guidelines employed in Japan, which assign higher importance to disaster prevention function based on field surveys, can be applied effectively for controlling the stand density of P. thunbergii coastal forests in South Korea, to improve their disaster prevention function.

• Clinical and Experimental Pediatrics
• /
• v.45 no.11
• /
• pp.1381-1388
• /
• 2002

Purpose : Magnetic resonance cholangiopancreatography(MRCP) is a noninvasive method for imaging the pancreaticobiliary tree. The aim of this study was to evalute the usefulness of MRCP for the diagnosis of pancreaticobiliary diseases in children. Methods : From October 1996 to May 2001, 67 patients with obstructive jaundice and three patients with chronic recurrent pancreatitis were evaluated with abdominal ultrasonography and MRCP. The final diagnosis was based on the operative and pathologic findings with biopsy specimen including clinical and laboratory findings. Results : A total of 70 patients, consisting of 31 males and 39 females, with a mean age of $2.6{\pm}3.3$ years were studied. The final diagnosis was biliary atresia in 25, neonatal cholestasis in 18, choledochal cyst without anomalous pancreatobiliary duct union(APBDU) in nine, choledochal cyst with APBDU in seven, cholestatic hepatitis in five, chronic recurrent pancreatitis in three, sclerosing cholangitis in two, and secondary biliary cirrhosis in one case. The overall diagnostic accuracy of abdominal ultrasonography was 75.7% and that of MRCP was 97.1%. The sensitivity and specificity of MRCP were 100% and 98% for biliary atresia, 87.5% and 100% for choledochal cyst with APBDU, 100% and 100% for choledochal cyst without APBDU, sclerosing cholangitis and chronic recurrent pancreatitis, respectively. Conclusion : MRCP is a fast, non-invasive and reliable method for diagnosing pancreaticobiliary diseases in children and will be the standard diagnostic procedure in the future.

• Journal of Korean Society of Forest Science
• /
• v.40 no.1
• /
• pp.1-18
• /
• 1978

Three Pinus densiflora populations as shown in location map (Fig. 1) were studied in 1977. These succeed the population numbers 10, 11 and 12 after the preceeding populations. Following the previous study methods, 20 trees were chosen from each population and the morphological characteristics such as tree forms, branching habit, needle and wood properties were investigated. The results are summerized as follows; 1. The mean stand ages were ranged from 40 to 45. The growth performances of trees of population 10 and 11 was similar, but 12 seemed to be inferior more or less. 2. The ratios of clear bole length was 0.53 in population 12 as the highest but 0.43 for population 10 as the lowest. 3. The population 12 was considered to be a stand of the coarser branching habit having the crown index (The maximum crown diameter/the crown length) 1.65 though the mean branching angle indicates almost horizontal. 4. The differences were observed in the clear bole length ratios and crown-indices between populations as shown in Fig. 3 and 4. 5. No inter-population differences in serration density of needle was shown but significant inter and intra-population and individual differences (within population) in number of stomata rows and resin duct. 6. Population 12 shown 0.119 of resin duct index as the maximum. 7. The pattern of diameter growth, analyses based on the width of 10-year-ring segment unit (for example, the 1st segment denotes the width between pith center and 10th year ring and the 2nd one is from 11th to 20th year ring and so on.), was alike among populations as shown in Fig. 9. 8. No significant differences between population in mean summer wood percentages as well as in wood specific gravity was observed. The values of wood specific gravity were increased with the increase of ages in population 10 and 11 however vice versa in population 12. 9. The fiber length was increased with the increase of age but no differences between populations as shown in Fig. 12.

• Journal of Korean Society for Geospatial Information Science
• /
• v.23 no.1
• /
• pp.101-111
• /
• 2015

Stream restoration projects have become threats to riparian ecosystem in Rep. of korea. Riparian wildlife becomes isolated and the animals are often experience difficulties in crossing riparian corridors. The purposes of this study is to select suitable wildlife passages for wild animals crossing riparian corridors. Maximum entropy model and snow tracking data on embankment in winter seasons were used to develop species distribution models to select suitable wildlife passages for water deer. The analysis suggests the following. Firstly, most significant factors for water deer's habitat in area nearby riparian area are shown to distance to water, age-class, land cover, slope, aspect, digital elevation model, tree density, and distance to road. For the riparian area, significant factors are shown to be land cover, size of riparian area, distance to tributary, and distance to built-up. Secondly, the suitable wildlife passages are recommended to reflect areas of high suitability with Maximum Entropy model in riparian areas and the surrounding areas and moving passages. The selected suitable areas are shown to be areas with low connectivity due to roads and vertical levee although typical habitats for water deer are forest, grassland, and farmland. In addition, the analysis of traces on snow suggests that the water deer make a detour around the artificial structures. In addition, the water deer are shown to make a detour around the fences of roads and embankment around farmland. Lastly, the water deer prefer habitats around riparian areas following tributaries. The method used in this study is expected to provide cost-efficient and functional analysis in selecting suitable areas.