• Korean Journal of Agricultural and Forest Meteorology
• /
• v.17 no.1
• /
• pp.58-68
• /
• 2015

This study compares the wind stability of Larix kaempferi (Lamb.) Carr., Pinus koraiensis Sie. & Zucc. and Abies holophylla Maxim. to understand and inform wind risk management of these plantation trees at Daegwallyeong, Korea. Temporary square plots of $20m{\times}20m$ ($400m^2$) were laid out, and DBH (Diameter at Breast Height) and height for trees greater than 10 cm in DBH were measured by species. A total of 15 plots with 5 plots each in L. kaempferi, P. koraiensis and A. holophylla stands were sampled at random. Among the species, A. holophylla and P. koraiensis have comparatively lower h/d (Height/DBH) ratios than L. kaempferi. These results indicate that the former two species are more wind firm than the latter species. About 9% of the L. kaempferi trees have higher h/d ratios than the critical threshold limit 80. These trees are vulnerable to wind damage and should be removed in the next thinning regime. The analysis of variance detected a significant difference (p < 0.05) in the h/d ratios and Gini coefficient indicating species differences and DBH size variation, respectively. Gini coefficient was 16.4% in A. holophylla, 15.9% in P. koraiensis and 14% in L. kaempferi stands indicating limited DBH size variation. Lower h/d ratios are attributed to thinning in these stands and tree morphological differences. To increase wind firmness, low thinning should concentrate to remove trees with the h/d ratio above 80 coinciding at the time of stand distinction phase. Forest managers and practitioners should measure and maintain h/d ratios of trees below the critical threshold limit of 80 through stand density management. Variable density thinning approach should be tested to increase tree DBH sizes of the even-aged stands.

• Journal of Korean Society of Forest Science
• /
• v.111 no.2
• /
• pp.302-310
• /
• 2022

Here we aimed to classify the major coniferous tree species (Pinus densiflora, Pinus koraiensis, and Larix kaempferi) by tree measurement information and machine learning algorithms to establish an efficient forest management plan. We used national forest monitoring information amassed over nine years for the measurement information of trees, and random forest (RF), XGBoost (XGB), and light GBM (LGBM) as machine learning algorithms. We compared and evaluated the accuracy of the algorithm through performance evaluation using the accuracy, precision, recall, and F1 score of the algorithm. The RF algorithm had the highest performance evaluation score for all tree species, and highest scores for Pinus densiflora, with an accuracy of about 65%, a precision of about 72%, a recall of about 60%, and an F1 score of about 66%. The classification accuracy for the dominant trees was higher than about 80% in the crown classes, but that of the co-dominant trees, the intermediate trees, and the overtopper trees was evaluated as low. We consider that the results of this study can be used as reference data for decision-making in the selection of thinning trees for forest management.

• Journal of the Korean Wood Science and Technology
• /
• v.13 no.3
• /
• pp.41-48
• /
• 1985

In near future about 500,000 hectares of Japanese larch and pitch pine need thinning to improve crop-tree spacing and reasonable species composition in Korea. Although thinned trees show very little high quality wood, in fact, all the sawed products are suitable for construction and farming materials. Studies on the utilization of thinned small-diameter trees have been implemented in order to increase lumber yield and display the skeleton of farm buildings. The results obtained in this study were summarized as follows: 1. According to Korean Conifers Log Grading System, log grade 3 was 87.4 percent in Japanese larch bolts and 95.8 percent in pitch pine bolts from thinned trees. The ability to identify defects was essential for grading logs. 2. Cutting diagrams of sawing were developed for 1-sided sawing, 2-sided sawing and 3-sided sawing by small end diameter class of bolt and cutting sizes also were found to use effectively lumber with wane. 3. Lumber recovery of Pitch pine was a little higher than that of Japanese larch. The maximum lumber yields of pitch pine by sawing patterns were 87.2 percent for 1-sided sawing, 80.8 percent for 2-sided sawing an 64.1 percent for 3-sided sawing, up yield compared with 58.1 percent for 4-sided sawing. The lumber yield of 1, 2 and 3-sided sawing significantly was higher value than that of 4-sided sawing. 4. Lumber was inspected and graded. Lumber quality of diameter class 12cm was a little better than that of diameter class 8cm, but 90 percent of lumber in diameter c1ass 16cm fell into grade 3. The lumber grade was classified by Korean standard grades of confiers lumber. 5. Lumber from 1, 2 and 3-sided sawing was used to build the skeleton of a farm house ($53m^2$) and greenhouse ($60m^2$) in order to display more efficient use of small diameter trees from thinning 6. Total volume of timber for building a farm house was $8.1m^3$ of imported timber. Timber of $7m^3$, 70 percent of total volume would be substituted imported timber for domestic timber.

• Korean Journal of Environment and Ecology
• /
• v.23 no.4
• /
• pp.365-375
• /
• 2009

The growth characteristics of Pinus thunbergii windbreak forest around Goosipo Beach, Sangha-Myon, Gochang-Gun, Jeollabuk-Do have been investigated, and the results are summarized as follows. The soil in the site was light acid sand with pH 5.7, and the mean sodium concentration of soils was 1.42dS/m. The tree diameter, height, crown width, and shape ratio(Height/DBH) were better with tree density was coming lower. Especially, the rate of shape ratio under 60 was more in sites with low tree density. This demonstrated that the trees have grown more soundly when the tree density was lower. The direction of main winds and distribution ratio of tree inclination had a correlation. The inclined trees are seemed to be influenced by main winds when they were younger and by Typhoon partly. Eighty one vascular plant species were found in the sites, and more number of herbaceous plants (57 taxa) lived there than woody plants (24 taxa). And more plant species of dune were found at the site where dune have developed well. Some thinning works need at high tree density areas in order to ensure effects of coastal windbreak.

• Journal of Environmental Science International
• /
• v.32 no.4
• /
• pp.233-242
• /
• 2023

The objective of this study was to develop a management strategy for the recovery of carbon storage capacity of abandoned coal mine forest rehabilitation area. For the purpose, the biomass and stand carbon storage over time after the forest rehabilitation by tree type for Betula platyphylla, Pinus densiflora, and Alnus hirsuta trees which are major tree species widely planted for the forest rehabilitation in the abandoned coal mine were calculated, and compared them with general forest. The carbon storage in abandoned coal mine forest rehabilitation areas was lower than that in general forests, and based on tree species, Pinus densiflora stored 48.9%, Alnus hirsuta 41.1%, and Betula platyphylla 27.0%. This low carbon storage is thought to be caused by poor growth because soil chemical properties, such as low TOC and total nitrogen content, in the soil of abandoned coal mine forest rehabilitation areas, were adverse to vegetation growth compared to those in general forests. DBH, stand biomass, and stand carbon storage tended to increase after forest rehabilitation over time, whereas stand density decreased. Stand' biomass and carbon storage increased as DBH and stand density increased, but there was a negative correlation between stand density and DBH. Therefore, after forest rehabilitation, growth status should be monitored, an appropriate growth space for trees should be maintained by thinning and pruning, and the soil chemical properties such as fertilization must be managed. It is expected that the carbon storage capacity the forest rehabilitation area could be restored to a level similar to that of general forests.

• The Korean Journal of Mycology
• /
• v.45 no.1
• /
• pp.1-13
• /
• 2017

Armillaria species are non-obligate root pathogens, as well as facultative parasites. The genus consists of about 40 species with worldwide distribution that are difficult to identify morphologically. Their hosts include conifers, hardwoods, vines, and even herbs. These fungi contribute to natural thinning and succession of vegetation in forests and decompose wood to develop edible fruiting bodies from spring to autumn. Its genets have a lifespan of up to 2000 years and have been found to occupy as much as 960 ha of forest land. Recently, forest tending work such as thinning of forests has resulted in the creation of tree stumps that support the growth of Armillaria, and these mushrooms have become an income source in mountainous areas. Therefore, identification of these species is needed. We review the difficulties in identification, suggest a species identification key for Korean indigenous species, and discuss the significance of Armillaria in terms of forest ecology and plant pathology.

• Journal of Korean Society of Forest Science
• /
• v.97 no.6
• /
• pp.605-610
• /
• 2008

This study was carried out to investigate the short-term (3 years) effect of thinning on aboveground carbon storage for 34-year-old (site 1) and 45-year-old (site 2) Korean pine (Pinus koraiensis Siebold et Zuccarini) plantations with different diameter class and site quality located in Gwangneung experimental forest. Thinning was manually carried out in consideration of basal area in 2004 (site 1 : 30% and 60% of basal area removed and site 2 : 60% of basal area removed). In 2004 and 2007, DBH and tree height were measured to analyze the changes in carbon storage after thinning. In the sites of 60% of basal area removed, although the mean DBH of site 1 was higher than that of site 2, mean annual carbon storage increment in site 2 ($6.5Mg\;C\;ha^{-1}yr^{-1}$) was about 3 times higher than that in site 1 ($2.3Mg\;C\;ha^{-1}yr^{-1}$). The reason for this result was probably due to higher stem density and site quality in site 2 compared to site 1. In site 2, mean annual carbon storage increment in thinned plot ($6.5Mg\;C\;ha^{-1}yr^{-1}$) was about 1.3 times higher than that in control ($5.2Mg\;C\;ha^{-1}yr^{-1}$). The results suggest that the stem density and site quality may be much more related to the aboveground carbon storage compared to diameter class. In addition, it is needed to consider these two factors for determining whether thinning is a feasible management alternative for the increase in aboveground carbon sequestration.

• Journal of Korean Society of Forest Science
• /
• v.85 no.3
• /
• pp.524-531
• /
• 1996

The objective of this study was to determine the important factors affecting the early natural regeneration of Pinus densiflora S. et Z. Seed germination, survival and height growth of the pine seedlings were examined at four experimental plots of P. densiflora forests including forest roadside. Plots I and III were thinned in 1992, plot II was treated with hexazinone in 1993 after seed tree method was applied in 1982 and 1989. Seedlings emerged after thinning and the rate of their emergence depended on forest floor conditions. Seedling survival was related with light conditions, herbaceous vegetation, and degrees of rainfall. More seedlings emerged in forest hauling roads than within the forest because soil scarification due to logging provided better conditions for seed germination and seedling growth. Seed supply was enough, but germination rate was very low in the forest compared with that in the greenhouse because micro-environments such as organic layer and herbaceous plant acted as limiting factors. Weed control was needed for 4 to 5 years until seedlings grew upto about 50cm in height which was similar to that of herbaceous plants. But 10-40% coverage of herbaceous vegetation was needed to protect small seedlings from heavy rain. Forest works such as thinning and logging, over 40% of light were important factors to help the pine regeneration. However, over 70% coverage of herbaceous vegetation, and heavy rain inhibited rather survival and growth of pine seedlings.

• Korean Journal of Soil Science and Fertilizer
• /
• v.49 no.5
• /
• pp.577-583
• /
• 2016

Small-sized persimmons produced by high crop load are better accepted in the export markets. However, maintaining high crop load frequently results in weakness of tree vigor, deterioration of fruit quality, and increase of the risks for alternate bearing. This experiment was conducted to determine the combined effects of fertilization rate and leaf-fruit (L/F) ratio on container-grown 3-year-old 'Fuyu' persimmon trees. Application of 3.6-g N, 2.1-g $P_2O_5$, 2.7-g $K_2O$, 2.7-g CaO, and 0.6-g MgO was for the control fertilization rate (CF) and that of a 3-fold CF was for the high fertilization rate (HF). Commercial fertilizers were surface-applied to a container on July 6, July 17, and August 10 in three equal aliquots. Single tree for each fertilization rate was assigned for 12 L/F ratios (5, 6.3, 7.7, 9, 10.4, 13, 15.5, 18, 21, 24, 27, and 33) mostly by fruit thinning or rarely by defoliation on July 1. HF did not affect the yield, weight and soluble solids of the fruits but decreased skin color. As L/F ratio increased, yield decreased but average weight, skin color, and soluble solids of fruits increased. With HF, N and K concentrations in leaves, fruits, and shoots increased to some extent but soluble sugars in dormant shoots decreased. Many shoots were cold-injured with low L/F ratio especially at the HF. HF did not increase number of flower buds the next spring either on a shoot or on a tree basis but increased shoot length, compared with the CF. Increasing L/F ratio markedly increased number of flower buds and shoot growth the following year at both fertilization rates. Therefore, an appropriate combination of fertilization rate and L/F ratio should be necessary to maintain stable fruit production and tree vigor at high crop load.

• Journal of Practical Agriculture & Fisheries Research
• /
• v.19 no.1
• /
• pp.39-49
• /
• 2017

The present study conducted a comparison on tree growth and productivity of high-density apple orchards by several orchard management systems: making scaffolds by heading-back and thinning out pruning (T-1), maintaining scaffolds upward and bearing shoots downward (T-2), managing branches slightly upward without heading-back (T-3), keeping leaders downward and shoots pending (T-4), maintaining leaders high and branches horizontal with severe pinching (T-5), making leaders with lower branches vigorous and upper shoots pending (T-6), and controlling very high planting density with bending branches (T-7). In conclusion, the orchards of (T-5) and (T-6) management systems showed a superior performance in controlling tree growth, productivity, and quality of fruits. Also, superior management efficiency was obtained in the orchards of (T-5) and (T-6).