• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1997년도 춘계학술대회 논문집
• /
• pp.305-308
• /
• 1997

Characteristics of tree propagation and fractal dimension in DGEBA/MDA/GN system were investigated. In the GN contents of 0 and 5 phr, tree was not produced. In the GN content of 10 phr, a reversed sigmoidal behaviour was found but in those of 15 and 20 phr, linear behaviors were found. All electrical trees possessed fractal characteristics. Fractal dimensions of epoxy resin system were almost constant with the variation of observation angles. Since dielectric breakdown occurred earlier in the GN content of 20 phr, fractal characteristics of modified epoxy resin system in a particular term couldnt be investigated.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1999년도 하계학술대회 논문집 E
• /
• pp.2396-2398
• /
• 1999

In this paper, inception and propagation of electrical tree and properties of partial discharge (PD) properties accompanying with tree in XLPE were discussed. The process of electrical tree using CCD camera and investigated the statistical characteristics of the PD properties by $\phi$-q-n pattern were observed. The statistical operators used were asymmetry and skewness.

• 조경수
• /
• 제79권3_4호
• /
• pp.31-32
• /
• 2004

바람꽃, 복수초와 함께 가장 먼저 봄을 알리는 자생화 중의 하나를 대라면 단연 노루귀이다. 꽃 모양도 예쁘지만 꽃대에 난 작은 은색 털들이 햇볕에 반사되는 모습을 보면 앙증맞을 정도로 아름답다. (중략)

• Journal of Forest and Environmental Science
• /
• 제35권4호
• /
• pp.272-280
• /
• 2019

Forest medicinal resources, which constitute one of the non-timber forest products, have been regarded as healthy and highly valued products. To meet the increasing demand of the medicinal resources, it is necessary to improve the propagation methods of medicinal plants. In vitro propagation not only allows an opportunity for propagating plants in large numbers but also allows for enhancing the quality and quantity of the desired functional component of a plant by altering the growth factors, such as medium, carbon source, and plant growth regulators influence plant. There have been several studies of in vitro propagation methods, such as axillary bud culture, shooting, and embryogenesis, on Kalopanax septemlobus, Eleutherococcus sessiliflorus, Hovenia dulcis, and Schisandra chinensis in Korea between from 2000 through 2010. Furthermore, there have been attempts to proliferate callus and plantlets for producing useful natural compounds by using bioreactors. Here, we provide an account of the in vitro propagation methods of medicinal trees in Korea based on a review of several micropropagation studies.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제12권7호
• /
• pp.3284-3306
• /
• 2018

This study proposes a method to develop an authoring system(GeoMaTree) for diverse trees that constitute a virtual landscape. The GeoMaTree system enables the simple, intuitive production of an efficient structure, and supports real-time processing. The core of the proposed system is a procedural modeling based on a mathematical model and an application that supports digital content creation on diverse platforms. The procedural modeling allows users to control the complex pattern of branch propagation through an intuitive process. The application is a multi-resolution 3D model that supports appropriate optimization for a tree structure. The application and a compatible function, with commercial tools for supporting the creation of realistic synthetic images and virtual landscapes, are implemented, and the proposed system is applied to a variety of 3D image content.

• 한국전기전자재료학회논문지
• /
• 제11권12호
• /
• pp.1055-1059
• /
• 1998

The correlation between the propagation of electrical tree and distributions of partial discharge(PD) pulses accompanying with electrical tree of bush type in low density polyethylene were discussed. We measured the growth of electrical tree by using optical microscope and PD data simultaneously. The PD data detected and analyzed were PD magnitude, repetition rate, average discharge power, average phase angle, and $\psi$-q-n distribution pattern. The average discharge power and repetition rate of PD had good linear relation with area of tree. Repetition rate and peak discharge magnitude and width of discharge phase angle increased with the tree.

• 한국정보통신설비학회:학술대회논문집
• /
• 한국정보통신설비학회 2007년도 학술대회
• /
• pp.251-255
• /
• 2007

In this paper, propagation analysis method in using 3D Ray Tracing propagation model in wireless cell planning is proposed. Through 3D Ray Tracing model, we can predict the distribution of propagation loss of the received signal. For correct and a low complex analysis, Quad Tree and Pre-Ordering and Hash Function algorithms are included in 3D Ray Tracing algorithm. And 3D Ray Tracing model is embodied in CellTREK that is developed by KT and used to plan Wibro system analysis. In CellTREK, propagation analysis is performed and that result is represented in 3D viewer. In numerical results, it is showed that the proposed scheme outperforms Modified HATA model when comparing with measurement data.

• 대한전자공학회논문지SD
• /
• 제44권2호
• /
• pp.104-112
• /
• 2007

본 논문에서는 저온 다결정 실리콘 공정에서 얻어지는 박막트랜지스터를 이용하여 $7{\times}7$ 병렬처리 곱셈기를 설계하였다. 7개의 부분곱은 Folding 회로를 기본으로 설계된 다치 논리 회로(7-3 Compressor)와 3-2 Compressor를 통해 2비트로 출력되어 Carry Propagating Adder로 전달되는 구조를 통해 Carry전달 지연을 최소화하여 연산속도를 향상시켰다. 그리고 전류모드로 동작하는 곱셈기에서 사용되는 전류원을 부분적으로 차단함으로써 전력소모를 감소시켰다. HSPICE 시뮬레이션 과정을 통해 제안된 곱셈기는 Wallace Tree 곱셈기에 비해 PDP(Power Delay Product)가 23%, EDP(Energy Delay Product)가 59%, 연산 속도가 47% 향상됨을 확인하였다.

• Transactions on Electrical and Electronic Materials
• /
• 제13권2호
• /
• pp.85-88
• /
• 2012

Studies on the effects of layered silicate content on the AC electrical treeing and breakdown behaviors of epoxy/layered silicate nanocomposites were carried out in needle-plate electrode geometry. Wide-angle X-ray diffraction (WAXD) analysis and transmission electron microscopy (TEM) observation showed that 1 wt% of the multilayered silicate was fully exfoliated into nano-sized monolayers in the epoxy matrix however, over 3 wt% of the silicate was in an intercalated state. When 1 wt% layered silicates were incorporated, an electrical tree was initiated in 439 min and propagated at a speed of 2.3 ${\mu}m$/min after applying 781.4 kV/mm, representing a decreased in starting initiation time by a factor of 11.0 and increase in propagation speed by a factor 8.2 in comparison with neat epoxy resin. These values were in great decline after the layered silicate content was increased to 3wt% which implies that the exfoliated silicate blocked the tree initiation and propagation processes effectively. However the effect was largely decreased in the intercalated state.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 1999년도 추계종합학술대회 논문집
• /
• pp.809-812
• /
• 1999

This paper presents the radio propagation effects in the shadow region due to the presence of obstacle, like building and tree, along the path at the B-WLL band. Using the Uniform Theory of Diffraction(UTD), the total field was obtained as the sum of contributions with diffraction ray from the each obstacle's edge, the direct ray, and the reflected rays from ground. The normalized signal level(in ㏈) is calculated with the parameters of the base station elevation and the distance between obstacle and receiver. This results are used to provide the suitable radio cell planning and coverage prediction in the area of shadow region.