• 대한전기학회논문지
• /
• 제34권11호
• /
• pp.436-439
• /
• 1985

An effect of the salt solution on the Water Tree Propagation was shown systematically from the actions of the salt concentration in deionized water. It may be able to suggest that the tree propagation is possibly to be connected with an intervention of the electrochemical or chemical actions of the salt solution on water tree propagation, which may likely depend on the growth level of the trees. We have pointed out that it is necessary to study the structure of water tree under the electrical stress.

• 한국안전학회지
• /
• 제15권1호
• /
• pp.100-105
• /
• 2000

Correlation between propagation of bush-type electrical tree and internal partial discharges(PD) was discussed. We used specimens with needle-plane electrode system made of LDPE(Low Density Polyethylene), observed inception and propagation of electrical tree by optical microscope interfaced with computer and investigated characteristics of phase resolved PD pulses accompanying with propagation of electrical tree. Electrical tree generally growed bush-type tree. PD data detected and analyzed were average discharge current and statistical operator of q-n, $\psi$- $q_{avg}$, $\psi$-n, ${\psi}-q_{max}$ distribution. Parameters used were skewness, kurtosis, average discharge phase, cross-correlation factor, asymmetry and etc. In generally, average discharge current had good linear relationship with propagation of bush type electrical tree on this experiment. Peak discharge magnitude and repetition rate were increased, but they had not good linear relationship.p.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1998년도 하계학술대회 논문집 D
• /
• pp.1478-1480
• /
• 1998

Inception and propagation of electrical tree and properties of partial discharge(PD) pulses accompanying with tree in low density polyethylene were discussed. We observed the characteristics of process of electrical tree by using optical microscope and investigated the statistical characteristics of the PD pulses by analyzing PD quantities and distribution patterns. The PD pulses were analyzed by q-n, $\phi$-n and $\phi$-q distribution. The statistical operators used were skewness(s), kurtosis(k) and average phase angle. The skewness and average discharge phase angle of PD pulses increased as the Propagation of tree. The kurtosis was about 1.8 at the Inception of tree, but It increased as the propagation of tree.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1999년도 추계학술대회 논문집
• /
• pp.59-62
• /
• 1999

Inception and propagation of electrical tree and properties of Partial discharge(PD) pulses accompanying with tree as a function of needle tip radius in low density polyethylene were discussed. To study on these characteristics in different tip radius, we used specimens with needle-plane electrode system made of LDPE, observed inception and propagation of electrical tree by optical microscope with computer and investigated the characteristics of the phase resolved PD pulses accompanying with propagation of electrical tree. The PD quantities detected and analysed were PD magnitude, mean phase angle, average discharge, and the statistical characteristics of the PD pulses. As the tip radius ${\gamma}$ increases, tree inception stress E$\sub$i/ converges to constance value. This result suggests that tree inception stress E$\sub$i/ increases due to stress relaxation when the tip radius is small. Branch-type electrical tree was formed When E$\sub$i/ is 640-750[kV/mm]. bush-type electrical tree when E$\sub$i/ is 370∼400[kV/mm], branch-like electrical tree when E$\sub$i/ is 370-400[kV/mm].

• 전기학회논문지
• /
• 제65권7호
• /
• pp.1218-1224
• /
• 2016

This paper presents the results of a study on the effect of surface modified alumina nanocomposites on electrical tree growth in epoxy insulation. Treeing experiments were conducted at a fixde AC voltage (500kV/mm, 10kV/60Hz)on unfilled epoxy sample as well as epoxy nanocomposites of 4 types with different loading and surface modified GDE gram. Time for tree growth as well as tree propagation length were studied. The results show that there is a significant improvement tree propagation time compare unfilled epoxy to epoxy nano alumina composites. Different tree propagation shapes as well as slower tree growth with 4 types nano alumina composites were observed.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1991년도 추계학술대회 논문집 학회본부
• /
• pp.427-430
• /
• 1991

In this study, in order to observe treeing of prebreakdown phenomena, time variation of acoustic emission properties due to initiation and propagation of tree in LDPE was investigated under AC voltage. The experimental results were as following, pulse number and average amplitude of AE were increased along with near breakdown rather than tree initiation, also, according to increasing of applied voltage, tree propagation was blunted, while pulse number and average amplitude of AE was promoted. In each applied voltage, ${\phi}-a$ distributions during propagation of tree were changed to special patterns, skewness S and kurtosis K reflected well time variation of ${\phi}-a$ distribution patterns. It is thought that initiation and propagation state of tree can be easily monitored, so long as time variation of pulse number and average amplitude of AE, skewness Sand kurtosis K of ${\phi}-a$ distribution are always monitored.

• E2M - 전기 전자와 첨단 소재
• /
• 제8권5호
• /
• pp.551-557
• /
• 1995

For the observation of treeing, a visual measurement with an optical microscope has been used to explain breakdown mechanism in high-voltage systems. The conventional directed visual method of tree aging observation is difficult to measure in short time processing, and it is impossible to analyze on tree degradation area, progressed direction, tree pattern, etc. By using an image processing technique, the tree features which appear immediately after the tree initiation as well as changes in the configuration of the tree can be easily measured and observed than using the conventional visual methods. In this paper, we have developed a tree observating system by using image processing for tree growth, degradation area and other treeing progress. As an experimental result, it can be concluded that the image processing method is a more effective alternative than directed visual observation method. As a matter of fact, it is possible to record the image of tree propagation immediately after its first appearance and explain the characteristics of tree growth froth the computer processing image.

• 한국멀티미디어학회논문지
• /
• 제9권12호
• /
• pp.1542-1551
• /
• 2006

In the Grid Database, some replicas will have more requests from the clients than others. A fast consistency algorithm has been presented to satisfy the high demand nodes in a shorter period of time. But it has poor performance in multiple regions of high demand for forming the island of locally consistent replicas. Then, a leader election method is proposed, whereas it needs much additional cost for periodic leader election, information storage, and message passing, Also, false leader can be created. In this paper, we propose a tree-based algorithm for replica update propagation. Leader replicas with high demand are considered as the roots of trees which are interconnected. All the other replicas are sorted and considered as nodes of the trees. Once an update occurs at any replica, it need be transmitted to the leader replicas first. Every node that receives the update propagates it to its children in the tree. The update propagation is optimized by cost reduction for fixed propagation schedule. And it is also flexible for the dynamic model in which the demand conditions change with time.

• 전자공학회논문지A
• /
• 제32A권12호
• /
• pp.209-219
• /
• 1995

As a new algorithm for RC tree delay estimation, we propose a $\tau$-model of the driver and a moment propagation method. The $\tau$-model represents the driver as a Thevenin equivalent circuit which has a one-time-constant voltage source and a linear resistor. The new driver model estimates the input voltage waveform applied to the RC more accurately than the k-factor model or the 2-piece waveform model. Compared with Elmore method, which is a lst-order approximation, the moment propagation method, which uses $\pi$-model loads to calculate the moments of the voltage waveform on each node of RC trees, gives more accurate results by performing higher-order approximations with the same simple tree walking algorithm. In addition, for the instability problem which is common to all the approximation methods using the moment matching technique, we propose a heuristic method which guarantees a stable and accureate 2nd order approximation. The proposed driver model and the moment propagation method give an accureacy close to SPICE results and more than 1000 times speedup over circuit level simulations for RC trees and FPGA interconnects in which the interconnect delay is dominant.

• 한국컴퓨터정보학회논문지
• /
• 제20권4호
• /
• pp.1-10
• /
• 2015

낸드 플래시는 기존의 하드디스크와 다르게 지움 연산이 필요하고 제자리 갱신이 불가능한 특성을 가지고 있어 플래시 전환 계층(FTL: Flash Translation Layer)을 사용한다. 하지만 플래시 전환 계층을 이용하는 방법은 사상 테이블의 사용에 따른 메모리 소비량이 많은 단점이 있어서 최근에는 사상 테이블을 사용하지 않는 색인 구조에 대한 연구가 많이 이루어지고 있다. 하지만 이러한 연구들은 사상 테이블을 사용하지 않는 시스템에서 발생되고 있는 업데이트 파생문제를 해결하여야 한다. 논문에서는 이러한 업데이트 파생문제를 효과적으로 해결하고자 CL-트리(Cache List Tree)라 명명된 새로운 색인 구조를 제안한다. 제안하는 기법은 메모리상에 쓰기 연산이 이루어진 노드들의 주소를 다중 리스트로 이루어진 CL-트리에 저장함으로써, 추가적인 쓰기 연산을 줄일 뿐만 아니라 자주 접근되는 노드에 대하여 빠르게 접근할 수 있기 때문에 탐색 측면에서도 뛰어난 성능을 보인다. 성능평가 결과 제안하는 CL-트리 구조는 작업 수행 속도에서 기존의 B+ 트리와 주요 관련 연구에 비해 삽입 속도는 최대 173%, 탐색 속도는 179% 향상되었음을 보였다.