• 생태와환경
• /
• 제49권2호
• /
• pp.124-129
• /
• 2016

본 연구는 하수처리장에서 최종 방류되는 하수처리수의 거품발생 원인분석과 저감방안을 제시하고자 수행되었다. 감조하천의 방류구에서 거품이 발생하는 것은 구조적인 문제점으로 파악되었다. 거품은 낙차에 의한 공기 연행과 확산방지막에 의한 내부축적이 주요한 원인이었다. 이러한 여건을 고려하여, 방류수로와 방류구 종단에서 미세스크린과 수중방류를 통해 거품발생을 완화시킬 수 있는 효과적인 방안을 제시하였다.

• 한국초전도ㆍ저온공학회논문지
• /
• 제22권1호
• /
• pp.1-6
• /
• 2020

This is a parameter study for the direct fabrication of a large grain YBCO bulk superconductors using Y₂O₃, BaCO₃ and CuO powders without any grinding step. The cracks, which have been formed due to volume contraction during calcination step, have been prevented by controlling the heating rate at 930~950 ℃. It has been observed that multi-grain growth has occurred due to the dissolution of Sm123 seed due to the retention of carbon in Ba-Cu-O melt. In order to accelerate the carbon release in prior calcination heat treatment, the reduction of pellet thickness and the drilling of artificial holes have been applied. Single-grain YBCO bulk superconductor has been successfully fabricated by stacking multiple thin slab. However, the crack formation has been rather prominent for the compact with artificial holes. The use of buffer pellet, which is supposed to act as diffusion barrier, has prevented the dissolution of Sm123 seed crystal and has led to the growth of single grain of high content of carbon containing specimen.

• BMB Reports
• /
• 제47권2호
• /
• pp.51-59
• /
• 2014

Cellular senescence is a physiological process of irreversible cell-cycle arrest that contributes to various physiological and pathological processes of aging. Whereas replicative senescence is associated with telomere attrition after repeated cell division, stress-induced premature senescence occurs in response to aberrant oncogenic signaling, oxidative stress, and DNA damage which is independent of telomere dysfunction. Recent evidence indicates that cellular senescence provides a barrier to tumorigenesis and is a determinant of the outcome of cancer treatment. However, the senescence-associated secretory phenotype, which contributes to multiple facets of senescent cancer cells, may influence both cancer-inhibitory and cancer-promoting mechanisms of neighboring cells. Conventional treatments, such as chemo- and radiotherapies, preferentially induce premature senescence instead of apoptosis in the appropriate cellular context. In addition, treatment-induced premature senescence could compensate for resistance to apoptosis via alternative signaling pathways. Therefore, we believe that an intensive effort to understand cancer cell senescence could facilitate the development of novel therapeutic strategies for improving the efficacy of anticancer therapies. This review summarizes the current understanding of molecular mechanisms, functions, and clinical applications of cellular senescence for anticancer therapy.

• 한국표면공학회지
• /
• 제36권3호
• /
• pp.251-255
• /
• 2003

With increasing environmental demands in surface treatment of steel sheets, the passivation layers containing hexavalent chromium $(Cr^{+6})$ are being replaced by non-chromium or trivalent chromium compounds. After review on the various types of inorganic compounds, the zirconates was chosen as the candidate for alternative to sodium dichromate in the aspect of its barrier properties with excellent adhesion to organics. The ammonium zirconium carbonate (AZC) and sodium hexafluorozirconate (SFZ) could be reach $70-80\%$ level of CDC (cathodic dichromate) treatment by their single applications. But high porosity in the AZC layer and poor electrical conductivity of SFZ solution limit the single application of zirconate. Mixed composition of zirconates to compensate their inferiorities or incorporation of organic compounds to seal the porosity seems to be inevitable to match up the target level of Cr-free passivation of tinplate.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• 제38권2호
• /
• pp.110-115
• /
• 2012

Ankylosed tooth is defined as 'the discontinuance of normal passive tooth eruption without any mechanical barrier'. Ankylosed tooth treatment is a challenge to dental clinicians. In treatment of maxillary molar ankylosis cases there are risks of oro-antral fistula, displacement of root fragments into the maxillary sinus, as well as the necessity for providing additional sinus bone augmentation for future implant placement. In this study, we suggested a new technique using a piezoelectric device and a lateral side approach to the maxillary sinus leading to the simultaneous removal of the ankylosed maxillary molar and sinus grafting for the purpose of implant site development.

• 한국전기전자재료학회논문지
• /
• 제19권11호
• /
• pp.1037-1043
• /
• 2006

We report the enhancement of hole injection using ozone-treated Ag nanodots dispersed on indium tin oxide anode in $Ir(ppy)_3-doped$ phosphorescent OLED. Phosphorescent OLED fabricated on Ag nanodots dispersed ITO anode showed a lower turn on voltage and higher luminescence than those of OLEDS prepared commercial ITO anode. Synchrotron x-ray scattering examination results showed that the Ag nanodots dispersed on ITO anode is amorphous structure due to low deposition temperature. It was thought that decrease of the energy barrier height as Ag nanodots changed to $AgO_x$ nanodots by surface treatment using ozone for 10 min led to enhancement of hole injection in phosphorescent OLED. Futhermore, efficient hole injection can be explained by increase of contact region between anode material and organic material through introduction of $Ag_2O$ nanodots.

• Korean Chemical Engineering Research
• /
• 제49권6호
• /
• pp.835-839
• /
• 2011

토치형 상압 플라즈마 반응기를 통한 방전 및 플라즈마 flame에 대한 분석과 발생된 플라즈마 현상을 이용하여 E. coli에 대한 살균효과를 측정하였다. 상압 플라즈마 반응기를 통해 나오는 플라즈마 flame의 길이는 입력전압, 반응기의 유량 그리고 아르곤/산소 혼합기체에서의 산소비율에 영향을 크게 받았다. 플라즈마 flame에 의한 가열효과는 10분 조사 후에도 $43^{\circ}C$ 미만으로 저온처리가 가능했다. E. coli에 대한 살균처리에서 입력전압의 증가, 아르곤/산소 혼합기체에서의 산소비율 증가 그리고 플라즈마 flame에 대한 노출시간의 증가에 따라 전체적인 살균효과를 향상되었다. 플라즈마 처리 시에 오존농도가 높은 공정조건에서 플라즈마 flame의 직접적인 접촉시간을 증가시키면 살균효과를 극대화할 수 있다.

• Journal of Advanced Marine Engineering and Technology
• /
• 제40권10호
• /
• pp.929-934
• /
• 2016

Plasma technology has long been regarded as a key essential tool in many industrial and technological sectors. However, the advancement of plasma technology in marine applications has not been fully realized yet. Herein, we present a short overview on the recent trends in utilization of plasma technology for air-pollution treatment in marine diesel exhaust. Four non-thermal plasma system, including electron beam dry scrubber (EBDS), dielectric barrier discharge (DBD), electron beam-microwave (EB-MW) plasma hybrid system, and plasma-catalytic hybrid system, are described with emphasis on their efficiency in removals of $NO_x$ and $SO_x$ gases. Non-thermal plasma has the great potential to be an efficient and environmentally compatible technique in simultaneous removals of $NO_x$ and $SO_x$ gases from the exhaust of marine diesel engine in the future.

• 한국전기전자재료학회논문지
• /
• 제11권12호
• /
• pp.1091-1098
• /
• 1998

Thermal stability of the electroless deposited Cu thin film was investigated. Cu/TaN/Si multilayer was fabricated by electroless-depositing Cu thin layer on TaN diffusion barrier layer which was deposited by MOCVD on the Si substrate, and was annealed in $H_2$ ambient to investigate the microstructure of Cu film with a post heat-treatment. Cu thin film with good adhesion was successfully deposited on the surface of the TaN film by electroless deposition with a proper activation treatment and solution control. Microstructural property of the electroless-deposited Cu layer was improved by a post-annealing in the reduced atmosphere of $H_2$ gas up to $600^{\circ}C$. Thermal stability of Cu/TaN/Si system was maintained up to $600^{\circ}C$ annealing temperature, but the intermediate compounds of Cu-Si were formed above $650^{\circ}C$ because Cu element passed through the TaN layer. On the other hand, thermal stability of the Cu/TaN/Si system in Ar ambient was maintained below $550^{\circ}C$ annealing temperature due to the minimal impurity of $O_2$ in Ar gas.

• Journal of Pharmaceutical Investigation
• /
• 제26권4호
• /
• pp.315-321
• /
• 1996

It has been indicated that problems associated with insulin iontophoresis are low bioavailability, slow absorption rate and the use of high dosage. Pretreatment of skin as a method of solving these problems was used in alloxan-induced diabetic white rabbits. Skins were treated with skin needle, electric razor, knife razor and scotch tape. Transport data shows that insulin delivery was enhanced significantly by the treatment which disrupt the barrier properties of stratum corneum. The data also shows that insulin absorption lasted for several hours after the cessation of iontophoresis. The degree of skin treatment was estimated by measuring the electrical resistance of skin. When the skins were treated with skin needle and electric razor, the standard deviations of resistance were small, which suggests the possibility of uniform delivery of insulin. The dermal responses after the invasive delivery were evaluated in accordance with OECD Guideline. It seems that electrical resistance of the skin correlate well with the dermal irritation.