• Journal of the Korean Society of Physical Medicine
• /
• v.4 no.3
• /
• pp.193-200
• /
• 2009

Purpose：In this study is to verify the effects postural control training based on Bobath approach for body schema and visual perception on Middle Cerebral Artery(MCA) Infarcts. Methods：The subject was a 46 years old man with MCA infaction, lives in B city. An AB design for a single-subject research was used for this study. The procedures consisted of 1 time of baseline phase(A), 20 times of treatment phase(B). We applied the Bobath approach at the subject. Treatments included to facilitate trunk alignment and stability, and to train weight bearing and shifting, to facilitate pelvis movement, and to train walk especially stance phase and assist up-down stairs locomotion in environment similar to actual daily life. Results：With this treatment, the majority of body schema and visual perception and postural control was improved in treatment phase compared with in baseline phase. Therefore, this study supported the effectiveness of postural control training based on Bobath approach for body sechma and visual perception of hemiplegia. Conculusion：This study is integrated postural control training with Bobath approach that are widespread for hemiplegia and measured outcomes based on individualized therapy goals. Consequently the study is suggested the meaning of quality effectiveness of Bobath approach.

• Nuclear Engineering and Technology
• /
• v.45 no.6
• /
• pp.821-826
• /
• 2013

In the present study, the effects of various heat treatments on the microstructure and mechanical properties of dual phase ODS steels were investigated to enhance the high strength at elevated temperature. Dual phase ODS steels have been designed by the control of ferrite and austenite formers, i.e., Cr, W and Ni, C in Fe-based alloys. The ODS steels were fabricated by mechanical alloying and a hot isostatic pressing process. Heat treatments, including hot rolling-tempering and normalizing-tempering with air- and furnace-cooling, were carefully carried out. It was revealed that the grain size and oxide distributions of the ODS steels can be changed by heat treatment, which significantly affected the strengths at elevated temperature. Therefore, the high temperature strength of dual phase ODS steel can be enhanced by a proper heat treatment process with a good combination of ferrite grains, nano-oxide particles, and grain boundary sliding.

• Journal of the Korean Society for Heat Treatment
• /
• v.26 no.6
• /
• pp.293-299
• /
• 2013

A specimen of weld metal was prepared by GTA welding with weld wire of super duplex stainless steel. Aging treatment was conducted for the sample at the temperature range of 700 to $900^{\circ}C$ for 5 to 300 minutes. The effect of volume fraction of ${\sigma}$-phase to intergranular corrosion of weld metal has been investigated and the results were derived as follows. The volume fraction of ${\sigma}$ phase tends to increase with an increase of aging temperature and time and intergranular corrosion of weld metal was increased by an increase of ${\sigma}$ phase. Degree of sensitization representing intergranular corrosion was found to tend to increase with an increase of aging time at 700 to $800^{\circ}C$, while it decreased by an increase of aging time at $900^{\circ}C$.

• Tribology and Lubricants
• /
• v.25 no.1
• /
• pp.7-12
• /
• 2009

Coating brittle intermetallic compounds on metal can enlarge the range of their use. It is found that intermetallic compound coating layers made by only combustion synthesis in an electric furnace have porous multi-phase structures containing several intermediate phases, even though the coating layers show good wear resistance. In this study, dense $Ni_{3}Al$ single phase layer corresponding to the initial composition of the mixed powder is coated on two different ferrous materials by the diffusing treatment after combustion synthesis. After- ward, sliding wear behaviors of the coating layer are evaluated in comparison with that of the coating layer with porous multi-phase structure made by only combustion synthesis. As a result, the wear properties of the coating layer composed of dense $Ni_{3}Al$ single phase are considerably improved at the range of low sliding speed com- pared with that of the coating layer with porous multi-phase structure, particularly in the running-in wear region. This is attributed to the fact that wear of the coating layer is progressed by shearing as a sequence of adhesion, not by occurring of pitting on the worn surface due to having dense structure without pores.

• Journal of the Korean Society for Heat Treatment
• /
• v.34 no.1
• /
• pp.1-9
• /
• 2021

The martensitic stainless steel has excellent corrosion resistance and higher strength by quenching and tempering heat treatment. It has been widely used as blade material due to these properties. The hardness and impact toughness of martensitic stainless steel depended strongly on tempering temperatures. The 12Cr martensite stainless steel (SS 410) tempered about 540℃ showed temper embrittlement. To know cause of temper embrittlement in terms of phase identification, a detailed analysis of electron diffraction patterns during TEM observations has been carried out on the <110>α-Fe and <113>α-Fe zone axes for temper embrittlement specimen. The double electron diffraction spots at 1/3(211) and 2/3(211) positions were observed. The lattice space between individual diffraction spots was about 3.5 Å and this value coincide with three times to α-bcc lattice space (1.17 Å). The area which found double diffraction spots was judged metastable "zone" similar to the omega phase and induced embrittlement of SS410 material.

• Journal of the Korean Society for Heat Treatment
• /
• v.27 no.1
• /
• pp.15-22
• /
• 2014

This study is to investigate the phase changes and cold workability after isothermal transformation at $780^{\circ}C$ by using the high temperature gas nitrided (HTGN) STS 430 ferritic stainless steel specimens. The phase diagram of STS 430 steel obtained by calculation showed that the phase appeared at $1100^{\circ}C$ showed as ${\alpha}+{\gamma}{\rightarrow}{\gamma}{\rightarrow}{\gamma}+Cr_2N{\rightarrow}{\gamma}+Cr_2N+CrN$ with increasing nitrogen concentration. Also, the transformation of ${\gamma}{\rightarrow}Cr_2N$ during heat treatment isothermally at $780^{\circ}C$, nitrogen pearlite with lamellar type was fully formed at the nitrogen permated surface layer for 10 hrs. However, this transformation was not completed for 1 hr, resulting nitrogen pearlite plus martensite. The cold rolled specimen of isothermally transformed at $780^{\circ}C$ for 10 hrs after high temperature gas nitriding decreased the layer thickness of nitrogen pearlite inducing the deformation of hard $Cr_2N$ phase. the dissolution rate of $Cr_2N$ phase increased rapidly with increasing cold rolling ratio. Specimens with the microstructure of nitrogen pearlite (isothermally transformed at $780^{\circ}C$ for 10 hrs) were possible to cold rolling without crack formation. However, the mixed structures of nitrogen pearlite + martensite (isothermally transformed at $780^{\circ}C$ for 1 hr) were impossible to cold deformation without cracking.

• Journal of the Korean Society for Heat Treatment
• /
• v.18 no.2
• /
• pp.91-98
• /
• 2005

Both commercially pure titanium and Ti-6Al-4V alloy have been widely used as biomaterials because of their excellent biocompatibility, corrosion resistance and mechanical properties. However, in recent years, vanadium has been found to cause cytotoxic effects and adverse tissue reactions, while aluminium has been associated with potential neurological disorders. A newly designed ${\alpha}+{\beta}$ type Ti alloy, Ti-10Ta-10Nb alloy showed superior properties to CP Ti and Ti-6Al-4V alloy in the point of biomaterial, and elucidated the future uses as a biomaterial. Microstructural changes of Ti-10Ta-10Nb alloy after hot-rolling, warm-rolling, solution and aging treatment were investigated. According to TEM results, the microstructures after solution treatment were composed of mostly ${\alpha}$ phase with a trace of ${\beta}$ phase due to adding ${\beta}$-phase stabilizer tantalum and niobium. The microstructures after warm-rolling is coarse and elongated ${\alpha}$ phase and hot rolling resulted in very fine ${\alpha}$ widmanst$\ddot{a}$tten. The highest value of hardness was obtained by aging treatment at $400^{\circ}C$ for 20hr in which microstructure consisted of very fine ${\alpha}$ phase in ${\beta}$ matrix.

• Resources Recycling
• /
• v.11 no.6
• /
• pp.31-37
• /
• 2002

Microstructure of aluminum alloys produced by the different mixing ratio of secondary ingot made by aluminum UBC (used beverage can) and virgin aluminum was investigated. The phase transitions of casted ingot by heat treatment were also studied. The alloys were melted at the electric resistance furnace, then casted using ceramic filter. Homogenization heat treatment was conducted at $615^{\circ}C$ for 10hrs to control cast microstructure. There were several kinds of phases, in as-cast condition, such as $\alpha$($Al_{12}$ $((Fe,Mn)_3$Si), $\beta$($Al_{6}$ (Fe,Mn)), and fine $Mg_2$Si phases. Especially, the amount of $\beta$-phase which was harmful in forming process was large. The $\beta$-Phase formed was transformed to u-phase by heat treatment. The fine $Mg_2$Si in the aluminum matix was also transformed to $\alpha$-phase by this heat treatment. Impurities filtered during casting process were identified as intermetallic compounds of Fe, Cu, Si.

• The Journal of Internal Korean Medicine
• /
• v.38 no.2
• /
• pp.164-171
• /
• 2017

Objectives: The purpose of this case report is to describe the efficacy of Saenggan-tang-gagam treatment in a patient with immune-tolerant chronic hepatitis B who converted to the immune active phase during hospitalization for Intracerebral hemorrhage. Methods: A 61-year-old male patient with chronic hepatitis B was hospitalized from July 21, 2016 to October 24, 2016. On September 5, the patient showed fatigue and dyspepsia, and his urine was dark. These symptoms were accompanied by a dramatic elevation of aminotransferase (ALT), aspartate aminotransferase (AST), alkaline phosphatase (ALP), and gamma-glutamyl transferase (GGT) levels. Saenggan-tang-gagam was administered three times a day until the patient was discharged from the hospital. Results: After the Saenggan-tang-gagam treatment, AST and ALP levels decreased significantly, below the upper limit level. In addition, the levels of ALT and GG were significantly decreased. In addition, the fatigue, dyspepsia, and dark urine induced by hepatitis improved after the Saenggan-tang-gagam treatment. Conclusion: This case report suggests that traditional Korean medicine has a beneficial effect on the immune active phase of chronic hepatitis B.

• Asian Pacific Journal of Cancer Prevention
• /
• v.16 no.3
• /
• pp.1225-1233
• /
• 2015

This study aims to clarify the psychosocial reactions of female patients with gynecological cancer undergoing chemotherapy and in the process of suffering from alopecia and to examine their nursing support. The target group comprised female patients who had received two or more cycles of chemotherapy, were suffering from alopecia, and were aged 30-65. Data were collected from semi-structured interviews, conducted from the time the patients were informed by their doctors that they might experience alopecia due to chemotherapy to the time they actually experienced alopecia and until they were able to accept the change. Inductive qualitative analysis was employed to close in on the subjective experiences of the cancer patients. The results showed the existence of six phases in the psychosocial reactions in the process of alopecia: phase one was the reaction after the doctor's explanation; phase two was the reaction when the hair starts to fall out; phase three was the reaction when the hair starts to intensely fall out; phase four was the reaction when the hair has completely fallen out; phase five was the reaction to behavior for coping with alopecia; and phase six was the reaction to change in interpersonal human relationships. The results also made it clear that there are five types of reaction patterns as follows: 1) treatment priority interpersonal relationship maintenance type; 2) alopecia agitated interpersonal relationship maintenance type; 3) alopecia agitated interpersonal relationship reduction type; 4) alopecia denial interpersonal relationship reduction type; and 5) alopecia denial treatment interruption type. It is important to find out which of the five types the patients belong to early during treatment and provide support so that nursing intervention that suits each individual can be practiced. The purpose of this study is to make clear the process in which patients receiving chemotherapy come to accept alopecia and to examine evidence-based nursing care on patients with strong mental distress from alopecia.