Browse > Article
http://dx.doi.org/10.9725/kstle.2009.25.1.007

Analysis of Wear Properties for $Ni_{3}Al$ Layer coated on Ferrous Materials by Diffusion Treatment after Combustion Synthesis at low Temperature  

Lee, Han-Young (Department of Advanced Materials Engineering, Keimyung University)
Publication Information
Tribology and Lubricants / v.25, no.1, 2009 , pp. 7-12 More about this Journal
Abstract
Coating brittle intermetallic compounds on metal can enlarge the range of their use. It is found that intermetallic compound coating layers made by only combustion synthesis in an electric furnace have porous multi-phase structures containing several intermediate phases, even though the coating layers show good wear resistance. In this study, dense $Ni_{3}Al$ single phase layer corresponding to the initial composition of the mixed powder is coated on two different ferrous materials by the diffusing treatment after combustion synthesis. After- ward, sliding wear behaviors of the coating layer are evaluated in comparison with that of the coating layer with porous multi-phase structure made by only combustion synthesis. As a result, the wear properties of the coating layer composed of dense $Ni_{3}Al$ single phase are considerably improved at the range of low sliding speed com- pared with that of the coating layer with porous multi-phase structure, particularly in the running-in wear region. This is attributed to the fact that wear of the coating layer is progressed by shearing as a sequence of adhesion, not by occurring of pitting on the worn surface due to having dense structure without pores.
Keywords
$Ni_{3}Al$; coating; wear property; combustion synthesis; diffusing treatment;
Citations & Related Records
연도 인용수 순위
  • Reference
1 T.Kimata, K.Uenishi, A.Ikenaga and K.Kobayashi, 'Enhanced Densífication of Combustíon Synthesized Ni-Al Intennetallic Compound by Sí Addition', Intermetallics, No. 11, pp. 947-952, 2003   DOI   ScienceOn
2 H.Y.Lee, A.lkenaga, K.B.Kim and S.H.Kim, 'The Etfects of Induction Heating Rate on Properties of Ní-AI Based Intennetallic Compound Layer Coated on Ductile Cast lron by Combustion Synthesís', Intermetallics, No. 15, pp. 1050- 1056, 2007
3 A.lkenaga, Y.Goto, Y.Nitta, M.Kawamoto, K.Kobayashi and H.Araki, 'Densification of Ni-Al Intennetallic Coating on Spheroidal Graphite Cast Iron S ubstrate', J. Jpn. Foundry Eng Soc'' Vol. 68, pp. 852-857, 1996
4 Research group for cornbustion synthesis, 'Chernistry of Cornbustion Synthesis', Japan, TIC Book Co.; 1992
5 M .Salehi, F.Karimzadeh and A. Tahvílian, 'Fonnation of Ti-Ni Intermetallic Coatings on Carhon SteeI by a Duplex Proeess', Surf Coat. Tech., Vol. 48, pp. 55-60, 2001
6 C.Sierra and A.J.Vazquez, 'Dry Sliding Wear Behavior of Nickel Aluminides Coatings Produced by Selfpropagating High Temperature Synthesis', Interme-tallics Vol. 14, pp. 848-852, 2006   DOI   ScienceOn
7 H.Y.Lee, 'Analysis of Sliding Wear Mode on Anncaled Steel by X-ray Diffraction Technique', Wear, Vol. 256, pp. 657-663, 2004   DOI   ScienceOn
8 A.Okamoto, N.Ueda, K.Demizu, T.Sone, A.Ikenaga and Y.Hirose, 'Preparation of Ní-AI Intennetallic Compound Coating on Spheoidal Graphite Cast Iron by Combustion Synthesis and Heat Treatment', J of Jpn Foundry Eng Soc, Vol. 76, No. 6, pp. 454-461, 2004
9 A.Okamoto, A.lkenaga, T.Yoshimoto, Y.Hirose and H.Y. Lee, 'Effects on Silicon Additíon on NickelAluminide Surface Coatings Through Combustion Synthesis', J Jpn Foundry. Eng Soc., Vol. 77, pp. 744-751 , 2005
10 T.Murotani, T.Tacuchí, A.Ikenaga and Y.Hirose, ' Preparation of Ni-Al System Intennεtallic Compound by Reactive Sintering and Their Applications to Coating', J Jpn' Foμndry Eηg. Soc, Vol. 74, pp. 429-435, 2002
11 Materials Science Society of Japan, 'IntennetaIlic Compound for Materials', Japan, Shokabo Book Co, 1995
12 T.Murotani, T.Tacuchl, A.Ikenaga and Y.Hirose, '$Ni_3Al$ Coating by Reactive Sintering and Theír Wear Characteristics', J of Jpn Foundry Eng Soc. vol. 75, No. 9, pp. 539-599, 2003
13 A.Ikenaga, Y.Goto, Y.Nitta, K.Kawamoto, K.Kobayashi and K. Uenishi, 'Fabrication of Ni-Al Intennetallic Compound Layer on Spheroidal Graphite Cast Iron Substrate by SHS Reaction', J. Jpn. Foundry Eng Soc. , Vol. 68, pp. 417-422, 1996
14 H.Y.Lee, J.K.Roe and A.lkenaga, 'Sliding Wear Properties for Ni-Al Based Intennetallic Compound Layer Coated on Ductile Cast lron by Combustion Synthesis', Wear, Vol. 260, pp. 83-89, 2006   DOI   ScienceOn
15 J.Li, Y.Ytn and H.Ma, ' Preparation and properties of $Fe_3AI$-based friction materials', Tribology Int, vol. 38, pp. 159-163, 2005   DOI   ScienceOn
16 Z.Zhan, Y.He, D.Wang and w.Gao, 'Low-ternperature Processing of Fe-Al Intennetallic Coatings Assisted by Ball Milling', Intermetallics, Vol. 14, pp. 75-81 , 2006   DOI   ScienceOn