Journal of the Korean Society for Heat Treatment (열처리공학회지)

The Korean Society for Heat Treatment (한국열처리공학회)
권호 표지
DOI QR코드

DOI QR Code

Effect of σ-phase on Intergranular Corrosion of Super Duplex Stainless Steel Weld Metal

슈퍼듀플렉스강 용접금속의 입계부식에 미치는 σ 상의 영향

  • Lee, Jae-Hyoung (Dept. of Metallurgical Engineering, Pukyong National University) ;
  • Jung, Byong-Ho (Dept. of Metallurgical Engineering, Pukyong National University) ;
  • Seo, Gi-Jeong (Dept. of Metallurgical Engineering, Pukyong National University) ;
  • Kang, Chang-Yong (Dept. of Metallurgical Engineering, Pukyong National University)
  • Received : 2013.08.26
  • Accepted : 2013.09.12
  • Published : 2013.11.30
Download PDF
⟨ Previous Next ⟩

Abstract

A specimen of weld metal was prepared by GTA welding with weld wire of super duplex stainless steel. Aging treatment was conducted for the sample at the temperature range of 700 to $900^{\circ}C$ for 5 to 300 minutes. The effect of volume fraction of ${\sigma}$-phase to intergranular corrosion of weld metal has been investigated and the results were derived as follows. The volume fraction of ${\sigma}$ phase tends to increase with an increase of aging temperature and time and intergranular corrosion of weld metal was increased by an increase of ${\sigma}$ phase. Degree of sensitization representing intergranular corrosion was found to tend to increase with an increase of aging time at 700 to $800^{\circ}C$, while it decreased by an increase of aging time at $900^{\circ}C$.

Keywords

References

  1. Nathalie Lopez, Mariano Cid et al. : Mater. Sci. and Eng., A229 (1997) 123-128.
  2. K. Ravindranath and S. N. Malhotra : Corros. Sci., 37 (1995) 121-132. https://doi.org/10.1016/0010-938X(94)00120-U
  3. C. J. Park, V. Shankar Rao and H. S. Kwon : Corrosion, 61 (2005) 76-83. https://doi.org/10.5006/1.3278163
  4. N. Ebrahimi, M. Momeni et al. : Corros. Sci., 53 (2011) 637-644. https://doi.org/10.1016/j.corsci.2010.10.009
  5. Mehmet Emin ARIKAN, Mustafa DORUK : Turkish J. Eng. Sci., 32 (2008) 323-335.
  6. SC. Duret-Thual, M. bonis et al. : Materials and Corrosion, 52 (2001) 37-44. https://doi.org/10.1002/1521-4176(200101)52:1<37::AID-MACO37>3.0.CO;2-F
  7. L. Karlsson : Welding in the World, 43 (1999) 20-41.
  8. Ciofu Florin, Nioata Alin et al. : Welding in the Duplex Stainless Steel, IX (X IX) (2010) 52-59.
  9. B. Gideon, L. ward et al. : J. Mater. & Mater. Characterization & Eng., 7 (2008) 247-263.
  10. N. Lopez, M. Cid, M and Puiggali : Corrosion Science, 41 (1999) 1615-1631. https://doi.org/10.1016/S0010-938X(99)00009-8
  11. T. Ogawa and T. Koseki : Welding Journal, 68 (1989) 181-191.
  12. J. H. Potgieter, P. A. Olubambi et al. : Corros. Sci., 50 (2008) 2572-2579. https://doi.org/10.1016/j.corsci.2008.05.023
  13. Franc Tehovnik, Boris Arzensek et al. : Mater. and Technol., 45 (2011) 339-345.