• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.46 no.1
• /
• pp.40-46
• /
• 2001

Ozone ($O_3$)-induced changes in chlorophyll content and specific activities of antioxidant enzymes, such as superoxide dismutase (SOD), ascorbate peroxidase (APX), guaiacol peroxidase (GPX), dehydroascorbate reductase (DHAR) and glutathione reductase (GR) were investigated in two rice cultivars (Oryza sativa L.) grown under variable nutrient treatments. For this study, two rice cultivars of Ilpumbyeo (IL) and Keumobyeo#l (KM), which were known as resistant and susceptible to $O_3$, respectively, were exposed to $O_3$at 0.15ppm for 30 days and investigated with 10 days interval. The available nutrient regimes were varied by doubling the supply of nitrogen (N), phosphorus (P) and potassium (K) Within a basic fertilizer status (N, P, K; 15, 12, 12kg/l0a$^{-1}$ ). In both cultivars and at all nutrient status, chlorophyll content in $O_3$-treated plants decreased with prolonged treatment period, although higher N, P and K supply with $O_3$ treatment alleviated the decrease in chlorophyll content. The activities of almost all enzymes investigated for this study were decreased during initial stages of $O_3$- exposure except GPX which maintained higher activity throughout the exposure period than the non-treated plant. However, the antioxidant enzymes in $O_3$-treated plants showed almost the same or higher activities on 30 days after $O_3$ - exposure. The most significant changes in activities were observed in GR of the $O_3$-treated leaves. With the prolonged treatment period, the activity of GR at 30 days was increased by 3-8 times compared to those in 10 days. Most of the investigated enzymes showed very similar tendency to $O_3$ treatment in all fertilizer status. There was no observed evidence for enhanced detoxification of $O_3$-derived activated oxygen species in plants grown under higher fertilizer status compared with that in plants grown under basic fertilizer status. The increase in the activities of SOD, APX and GR in rice leaves by relatively long-term treatment with $O_3$ at low concentration is considered to indicate that the plant became adapted to the $O_3$ stress and the protection system increased its capacity to scavenge toxic oxygen species. Our results in two rice cultivars indicated that there was little difference in the activities of antioxidant enzymes between IL and KM, which were known as resistant and susceptible cultivar to $O_3$

• Korean Journal of Environmental Agriculture
• /
• v.35 no.4
• /
• pp.286-293
• /
• 2016

BACKGROUND: 18% of difenoconazole+iminoctadin triacetate microemulsion (3%+15%) formulation were mixed and sprayed as closely as possible to normal practice on the ten of farms located in the Youngju of South Korea. Patches, cotton gloves, socks, masks and XAD-2 resin were used to measure the potential exposure for applicators wearing standardized whole-body outer and inner dosimeter (WBD). This study has been carried out to determine the dermal and inhalation exposure to difenoconazole during preparation of spray suspension and application with a power sprayer on a grape orchard. METHODS AND RESULTS: A personal air monitor equipped with an air pump IOM sampler and cassette and glass fiber filter were used for inhalation exposure. The field studies were carried out in a grape orchard. The temperature and relative humidity were monitored with a thermometer and a hygrometer. Wind speed was measured using a pocket weather meter. All mean field fortification recoveries were between 97.3% and 119.6% in the level of 100 LOQ (limit of quantification) while the LOQ for difenoconazole was $0.025{\mu}g/mL$ using HPLC-UVD. The arms exposure to difenoconazole for the mixer/loader (0.0794 mg) was higher than other body parts (head, hands, upper body, legs). The exposure to difenoconazole in the legs for applicator (3.78 mg) was highest in the parts of body. The dermal exposure for mixer/loader and applicator were 0.02 and 2.28 mg on a grape orchard, respectively. The inhalation exposure during application was estimated as 0.02 mg. The ratio of inhalation exposure to dermal exposure was equivalent to 0.9% of the dermal exposure. CONCLUSION: The inhalation exposure for applicator indicated $18.8{\times}10^{-3}mg$, which was level of 0.9% of the dermal exposure (2.28 mg). Operator exposure (0.004 mg/kg bw/day) to difenoconazole during treatment for grape is calculated as 2.5% of the established AOEL (0.16 mg/kg bw/day).

• Journal of Chest Surgery
• /
• v.17 no.4
• /
• pp.786-791
• /
• 1984

Mesothelioma is relatively uncommon tumor compared to other thoracic tumors. It is interesting that there is a strong relationship between occurrence of malignant mesothelioma and exposure to asbestos, which was established during the last two decades. Malignant mesothelioma is discouraging in viewing its treatments and survival rates. Surgery with ancillary treatment, such as radiotherapy and chemotherapy, were still palliative, although encouraging results were reported. Between 1958 to 1983 at NMC, we have been experienced 6 cases of mesothelioma, confirmed by pathohistologic findings. The patients were distributed between 19 to 52 y-o age & were 5 males and 1 female. There was evidence of exposure to asbestos in 1 case. The method of operation were decortication [1], decortication with removal of tumor [1], pleuropneumonectomy with chemotherapy [1], chemotherapy [1], exploratory thoracotomy [1], and no treatment in 1 case due to private affairs. Histologic findings were 2 cases of benign mesothelioma type.

• Corrosion Science and Technology
• /
• v.14 no.6
• /
• pp.273-279
• /
• 2015

Effects of passive film quality by chemical passivation and solution flow on the corrosion behavior of 304 stainless steel in HCl solution were investigated using a coloration indicator, and by corrosion weight loss, electrochemical polarization and element dissolution measurements. A high redness degree suggests a low passive-film integrity for 304 stainless steel following air exposure, while the minimum redness degree for the samples after chemical passivation suggests a high passive-film integrity. In the static condition, samples subjected to air exposure exhibited a high corrosion rate and preferential dissolution of Fe. Chemical passivation inhibited the corrosion rate due to the intrinsically high structural integrity of the passive film and high concentrations of Cr-rich oxides and hydroxide. Solution flow accelerated corrosion by promoting both the anodic dissolution reaction and the cathodic reaction. Solution flow also altered the preferential dissolution to fast uniform dissolution of metal elements.

• Corrosion Science and Technology
• /
• v.14 no.6
• /
• pp.267-272
• /
• 2015

The performance of three tubular materials (C-90, L-80, and N-80) was evaluated in a synthetic brine inoculated with sulfate-reducing bacteria (SRB) in the absence and presence of biocides. A flow loop was used in the evaluation of the three alloys. Morphological examination of the alloy surfaces after exposure to SRB and after biocide treatment was performed by scanning electron microscopy (SEM) to determine the nature of any localized corrosion. The SE images of the coupon samples showed a marked difference between the biocide-treated and untreated samples. Small pits were observed on the ultrasonically cleaned surfaces of the three alloys after exposure to SRB. The biocide treatment reduced the number of SRB on the surfaces of the alloys. Results indicated that C-90 and L-80 alloys exhibited better MIC resistance than N-80 under the conditions used in this study.

• Laser Solutions
• /
• v.14 no.1
• /
• pp.25-29
• /
• 2011

Micromachining of photosensitive glass by UV exposure, heat treatment, and etching processes is reported. Like photoresist, the photosensitive glass is also classified into positive and negative types by development characteristics. For the positive type, the exposed area is crystallized and etched away during the etching process in HF solution, whereas the unexposed area is crystallized and etched away for the negative type. The crystallized area of the photosensitive glass has an etch rate approximately 30~100 times faster than that of the amorphous area so that it becomes possible to fabricate microstructures in the glass. Based on the unique properties of glass such as high optical transparency, electrical insulation, and chemical/thermal stability, the glass micromachining technique introduced in this work could be widely applied to various devices in the fields of electronics, bio engineering, nanoelectonics and so on.

• Animal cells and systems
• /
• v.16 no.2
• /
• pp.95-103
• /
• 2012

Asbestos exposure has been known to contribute to several lung diseases named asbestosis, malignant mesothelioma and lung cancer, but the disease-related molecular and cellular mechanisms are still largely unknown. To examine the effects of asbestos exposure in human bronchial epithelial cells at gene level, the global gene expression profile was analyzed following chrysotile treatment. The microarray results revealed differential gene expression in response to chrysotile treatment. The genes up- and down-regulated by chrysotile were mainly involved in processes including metabolism, signal transduction, transport, development, transcription, immune response, and other functions. The differential gene expression profiles could provide clues that might be used to understand the pathological mechanisms and therapeutic targets involved in chrysotile-related diseases.

• Journal of Gastric Cancer
• /
• v.24 no.1
• /
• pp.122-134
• /
• 2024

Most gastric subepithelial tumors (SETs) are asymptomatic and are often incidentally discovered during endoscopic procedures conducted for unrelated reasons. Although surveillance is sufficient for the majority of gastric SETs, certain cases necessitate proactive management. Laparoscopic wedge resection, although a viable treatment option, has its limitations, particularly in cases where SETs (especially those with intraluminal growth) are not visualized on the peritoneal side. Recent advances in endoscopic instruments and technology have paved the way for the feasibility of endoscopic resection of SETs. Several promising endoscopic techniques have emerged for gastric SET resection, including submucosal tunneling endoscopic resection, endoscopic full-thickness resection (EFTR), laparoscopic and endoscopic cooperative surgery (LECS), and non-exposure EFTR (non-exposed endoscopic wall-inversion surgery and non-exposure simple suturing EFTR). This study aimed to discuss the indications, methods, and outcomes of endoscopic therapy for gastric SETs. In addition, a simplified diagram of the category of SETs according to the therapeutic indications and an algorithm for the endoscopic management of SET is suggested.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.51 no.1
• /
• pp.54-63
• /
• 2018

We investigated the effect of $CO_2$ exposure on the reproductive process of chameleon goby Tridentiger trigonocephalus. Rearing aquaria were exposed for 90 days to $CO_2$ gas through diffuser connected with pH controller maintaining at pH 7.2 ($156.31{\pm}7.90ppm$) in low treatment, and at pH 6.5 ($274.17{\pm}6.51ppm$) in high treatment. $CO_2$ treatment had no significant effects on survival rates although the value was decreased compared to the controls. In female fish, $CO_2$ treatment had no significant effects on gonadosomatic index (GSI), hepatosomatic index (HSI) and condition factor (CF). However, high $CO_2$ treatment decreased HSI and CF in males significantly compared to the controls (P<0.05). The spawning occurrence was 6 times in the low level $CO_2$ treatment, and 4 times in the high level $CO_2$ treatment although only once in the controls. For the histological observations, there was no significant difference in $CO_2$ treatments. However, in male fish, $CO_2$ treatment delayed the formation of sperm from spermatid compared to controls. These results suggest $CO_2$ may disrupt reproductive process by delaying gametogenesis in chameleon goby and it was more sensitive in males.

• Journal of Adhesion and Interface
• /
• v.5 no.3
• /
• pp.1-9
• /
• 2004

Using the methods which described in ISO 4588, ASTM D2651 and the selected literature, we investigated the best conditions of acid treatment for stainless steel and carbon steel. The acid treatments were conducted with four different acid solutions which were prepared for stainless steel and carbon steel specimen. We observed the contact angle and morphology and roughness of the metal surface and the thickness change at various treatment conditions as treatment temperature and time. Also, we investigated the characteristics of the surface aging according to air exposure after surface treatment. As a result, the optimal temperature of the acid treatment for stainless steel and carbon steel were each obtained at $83^{\circ}C$ and $63^{\circ}C$. Also, it was confirmed that the acid treatments for the metal surface were accompanied with the decrease of thickness and the change of surface morphology due to significant erosion that depend on treatment methods. And also, it was characterized that the aspect of surface aging by air exposure was highly depended on the method of acid treatment.