• Journal of Korean Society of Transportation
• /
• v.26 no.6
• /
• pp.7-15
• /
• 2008

Due to the limitations in the statistical data, the existing studies adopted rough methodologies with strong assumptions in the estimation of international passenger travel demand forecast in the ASEAN region. This study aims to develop international passenger travel demand models using scientific methodologies. This study proposes a direct demand model using the immigration and emigration data between countries in the region. This is because of the difficulty of estimating trip generation and trip distribution separately due to the data limitation in the region. As there does not exist the mode choice model for the region, this study estimates a mode choice model using the Stated Preference technique. The mode choice model is separated into three categories of models according to the range of distance between the origin and destination of travel; this is to reflect the different behavior in mode choice according to the travel distance. The result of model estimations suggests that the estimated models produce resonable results statistically. It is expected that the proposed models are useful for the future travel demand estimation in the ASEAN region.

• Journal of Korean Society of Transportation
• /
• v.19 no.1
• /
• pp.89-99
• /
• 2001

The conventional studies on equilibrium network design problem(ENDP) with fixed travel demand models assume that the future OD travel demand might not be changed even if the structure and the capacity of the network are improved. But this fixed demand assumption may loose its validity in the long-range network design because OD travel demand actually shifts with the network service level. Thus, it is desirable to involve the variable travel demand which is determined endogenously in the model in the optimal network design. In this paper a hi-level model formulation and solution procedure for ENDP with variable travel demand are presented. Firstly It is considered how to measure the net user benefits to be derived from the improved in link capacities, and the equilibrium network design problem considered here is to maximize the increase of net user benefit which results from a set of lift capacity enhancements within the budget constraints, while the OD travel demands and link travel times are obtained by solving the lower level network equilibrium problem with variable demand. And secondly sensitivity analysis is carried out to find the links to which the network equilibrium flow pattern is the most sensitive. Finally numerical example with simple network is carried out to test the validity of the model.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.34 no.6
• /
• pp.1873-1879
• /
• 2014

There are various methodologies to forecast the travel time using real-time data but the K-nearest neighborhood (KNN) method in general is regarded as the most one in forecasting when there are enough historical data. The objective of this study is to evaluate applicability of KNN method. In this study, real-time and historical data of toll collection system (TCS) traffic flow and the dedicated short range communication (DSRC) link travel time, and the historical path travel time data are used as input data for KNN approach. The proposed method investigates the path travel time which is the nearest to TCS traffic flow and DSRC link travel time from real-time and historical data, then it calculates the predicted path travel time using weight average method. The results show that accuracy increased when weighted value of DSRC link travel time increases. Moreover the trend of forecasted and real travel times are similar. In addition, the error in forecasted travel time could be further reduced when more historical data could be available in the future database.

• Journal of Welding and Joining
• /
• v.16 no.5
• /
• pp.86-92
• /
• 1998

High speed wire seam weldability of tin coated thin gage sheet steels was investigated. Thickness and coating weight ranges of the test materials were 0.21~0.35mm and 1.1/1.1~2.8/11.2g/$m^2$, respectively. Test results indicated that the surface roughness value, Rz decreased as increasing the coating weight. The Rz was thought to be one of the important factors to influence the optimum welding condition range, $\triangle$Q. The $\triangle$Q showed close relationship with welding conditions such as welding pressure and travel speed. Higher welding pressure widened the $\triangle$Q while higher travel speed reduced the $\triangle$Q value. Results also demonstrated that tin coating weight should be optimized based on the weldability or the serviceability after welding. At th HAZ of sheet materials with thinner coating layer, tin depleted zone was produced since molten film of the coating material on the base metal agglomerated by the surface tension, which could result in reducing the corrosion resistance of the HAZ in the service environment.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.62 no.3
• /
• pp.387-394
• /
• 2013

A travel aid system for the visually impaired person is proposed by providing the position and heading information. The position and heading information is obtained from range difference localization estimator, and the information is notified to the visually impaired person by using braille display system. For the precise estimation of the position and heading information, we apply recently developed linear localization estimator which utilizes the instrumental variable method and the state augmentation method. The estimation results are compared with well-known Kalman filter through experiment.

• Journal of the Korean Professional Engineers Association
• /
• v.25 no.4
• /
• pp.102-108
• /
• 1992

This study was carried to find out the soil characteristics of landslide site and to develope landslide prediction method by seismic refraction prospecting. For these aims, landslide condition and travel time were investigated at 68 Landslide sites over the country during 1990 to 1991. The results were as follows. 1. The surface of rupture was included mainly in C layer. Its Hardness was less than 3kg / $\textrm{cm}^2$ at the upper pare of landslide. 2. When the profile line length was 20m, the range of travel time was 40 to 90 msec. The travel time did not differ between bedrocks. 3. Refraction distance ranged from 1 to 7m and mean of that was 2.5m. Travel time was increased according to receiving distance without large variance in the refraction distance but that was appeared large variance out of the refraction distance on slope that has shallow soil depth and discontinuous ground surface. Therefore, the spread distance must be shorten to 10-l5m. 4. The seismic velocity at the first layer(layer of rupture) was less than 500m1sec by degree of weathering and the velocity at the second layer decreased in order of Granite> Granitic gneiss >Sedimentary rock. 5. The first layer observed by seismic refraction was contained C layer that has parent material and weathered rocks of hardness 10-20kg/$\textrm{cm}^2$. 6. Among the range of seismic velocity was less than 200m/sec in 63% of the total plots, 200-300m/sec in 34% and 300-500m /sec in 3%. 7. There was a proportional relationship between seismic prospecting soil depth and executive soil depth, and seismic propection soil depth was about 10 to 20cm deeper than the order.

• Journal of Welding and Joining
• /
• v.7 no.4
• /
• pp.12-21
• /
• 1989

Laser beam welding parameters have experimentally investigated, using a continuous wave 3kW $CO_2$ laser with the various travel speeds, beam mode and laser beam power in low carbon steels. An optimum position of focus and the effect of shielding gas on penetration depth with varying the flow range of 0.5 to 5.1m/min have been combined to investigate the effect of laser power and travel speed on penetration depth and bead width. It is found that the optimum position of focus in 3kW class laser is 0.5 to 1.5mm below the surface of the material. The flow rate of shielding gas affects the penetration depth and He is more effective than Ar. The penetration depth in laser welds of low carbon steels is between two and four times of the bead width. Laser beam welding of butt joints in 2mm thick carbon steel has been carried out to establish a weldability lobe. The lobe indicating acceptable welding conditions is introduced.

• Journal of Korean Society of Transportation
• /
• v.33 no.3
• /
• pp.315-321
• /
• 2015

ATMS calculates section travel time using two-way communication system called DSRC(Dedicated Short Range Communications) which collects data of RSE (Road Side Equipment) and Hi-pass OBU (On-board Unit). Travel time estimation in urban area involves uncertainty due to the interrupted flow. This study not only analyzed real-time data but also considered pattern data. Baek-Je-Ro street in Jeon-Ju city was selected as a test site. Existing algorithm was utilized for data filtering and pattern data building. Analysis results repoted that travel time estimation with 20% of real-time data and 80% of pattern data mixture gave minimum average difference of 37.5 seconds compare to the real travel time at the 5% significant level. Results of this study recommend usage of intermixture between real time data and pattern data to minimize error for travel time estimation in urban area.

• Bulletin of the Society of Naval Architects of Korea
• /
• v.6 no.1
• /
• pp.35-42
• /
• 1969

Penetrations of arc welding electrades are different by changing welding conditions, welding speed of travel and current, even though quite same ones. Changing status of penetration is studied by changing welding speed of travel keeping welding current constant, at first, and by changing welding current keeping welding speed of travel which was obtained prior experiment constant, afterward. The F-100 4mm $\phi$ rods, E4301 class, which covering substance is mainly ilmenite and a domestic representative product of this class electrode, are used for this experiment. The Marquette's No.130 5/32"(4mm)$\phi$ rods, E6011 class, and No. 140 5/32"(4mm)$\phi$, E6013 class, which were produced in the United Stated, are used to compare penetration with F-100 at same welding conditions. The covering substance of Marquette's No. 130 rods is mainly cellulose, and belong to deep penetration arc welding electrodes, the covering material of another rods is titania, and a kind f shallow penetration rods. The result of this study is as follow : penetration of F-100, domestic ilmentite covering electrade, E4301 class, is between E6011 and E6013 of the United States products. At the lower range of welding current, penetration is closer to E6013 than E6011, at the higher range, closer to E6011 than another; and the value of penetration ranges $1.65{\sim}2.70mm$ for 4mm$\phi$ rods in the adequate current range. The changing status of penetration is showed by following experimental formula. $P=KE_v^{-\frac{2}{5}}1^{\frac{3}{2}}$

• Journal of Cadastre & Land InformatiX
• /
• v.52 no.2
• /
• pp.153-169
• /
• 2022

With the extension of the average life span and the rapid aging of the population, defining elderly population as a single group is difficult as the physical, economic and social conditions of individual have become different. Therefore, policies that take into account the characteristics of each group are required. The purpose of this study is to classify individual travel types and to analyze the characteristics of each travel type, based on individual public transportation trajectory data as known as smart card data. Among the four classified types, the long-distance low-frequency stay type and the short-range medium-frequency mobile type show external activity traffic characteristics for retirement leisure, while the long-distance high-frequency stay type and the long-distance high-frequency mobile group include regular commuting. Traffic variability and residence areas of stay were identified in terms of each classified travel type. The results of this study provide the important suggestions for establishing a transportation policy that takes into account the characteristics of each type of elderly population in Seoul.