• 제목/요약/키워드: Trap problem

검색결과 63건 처리시간 0.031초

Enhanced Dynamic Segment Protection in WDM Optical Networks under Reliability Constraints

  • Guo, Lei;Cao, Jin;Yu, Hongfang;Li, Lemin
    • ETRI Journal
    • /
    • 제28권1호
    • /
    • pp.99-102
    • /
    • 2006
  • In this letter, we study the protection problem in wavelength division multiplexing (WDM) optical networks, and propose a novel dynamic heuristic algorithm called differentiated reliable segment protection (DRSP). Differing from previous work, DRSP can effectively avoid the trap problem and is able to find a feasible solution for each connection request. Therefore, DRSP outperforms the previous work. Simulation results have shown to be promising.

  • PDF

저온 Poly-Si TFT 소자의 Hysteresis 특성 개선 (Improvement of Hysteresis Characteristics of Low Temperature Poly-Si TFTs)

  • 정훈주;조봉래;김병구
    • 한국정보전자통신기술학회논문지
    • /
    • 제2권1호
    • /
    • pp.3-9
    • /
    • 2009
  • AMOLED 디스플레이는 LCD에 비해 넓은 시야각, 빠른 응답 속도, 박막화의 용이성 등의 많은 장점들을 갖고 있으나 불균일한 TFT의 전기적 특성과 전원선의 전압 강하에 의한 휘도 불균일, 잔상 현상 및 수명 등과 같은 많은 문제점들이 있다. 이 중에서 본 논문에서는 구동 TFT 소자의 hysteresis 현상에 의해 발생하는 가역적 잔상 현상을 개선하고자 한다. TFT의 hysteresis 특성을 개선하기 위해 게이트 산화막 증착 전에 표면 처리 조건을 변경하였다. 게이트 산화막 증착 전에 실시한 자외선 및 수소 플라즈마 표면 처리는 게이트 산화막과 다결정 실리콘 박막 사이의 계면 trap 밀도를 $3.11{\times}10^{11}cm^{-2}$로 감소시켰고, hysteresis 레벨을 0.23 V로 줄였으며 출력 전류 변화율을 3.65 %로 감소시켰다. 자외선 및 수소 플라즈마 처리를 행함으로써 AMOLED 디스플레이의 가역적 잔상을 많이 개선할 수 있을 것으로 기대된다.

  • PDF

룸 튜닝에 의한 실내 공진의 최소화 (On the Minimization of Room Resonance by Room Tuning)

  • 강성훈
    • 한국음향학회지
    • /
    • 제31권8호
    • /
    • pp.507-513
    • /
    • 2012
  • 스피커를 실내에서 재생하면 공진에 의해서 저역에 피크와 딥이 생겨서 좋은 저음을 재생하기 어렵다. 이러한 공진을 줄이기 위해서 어느 특정 지점에서 전기적으로 이퀄라이징을 하지만, 이는 그 지점에서만 유효하다. 그리고 이퀄라이징으로 주파수 특성을 평탄하게 조정할 수 있지만, 특정 주파수에서 울림(ringing)은 제거되지 않는다. 다른 방법은 실내 공진이 여기되지 않은 지점에 스피커를 설치하는 것이다. 그러나 현실적으로 실내에서는 여러 가지 제약 때문에 원하는 지점에 스피커를 실제로 설치하기가 어렵다. 따라서 실내 공진에 의한 저주파수의 문제를 해결하기 위한 이상적인 방법은 베이스 트랩을 사용하는 것이다. 본 논문에서는 이퀄라이징에 의한 룸 튜닝과 스피커를 설치하는 위치의 최적화를 논의하고, 공진 모드에 의한 저주파수의 문제는 베이스 트랩을 실내에 설치하여 해결하는 것이 최상의 방법이라는 것을 제시하였다.

방진고무사출성형의 적정설계 (Optimum Design of Rubber Injection Molding Process for the Preparation of Anti-vibration Rubber)

  • 임광희
    • Korean Chemical Engineering Research
    • /
    • 제48권4호
    • /
    • pp.490-498
    • /
    • 2010
  • K사의 방진고무 사출성형에 있어서 애로사항인 토크로드부시(torque rod bush)의 캐비티 가장자리(edge) 구간에서의 에어트랩(air-trap) 발생 및 다이내믹 댐퍼(dynamic damper)에 있어서 사출시 미성형(short shot) 발생 등의 문제점을 해결하기 위하여, 상용 CAE 프로그램인 MOLDFLOW(Ver. 5.2)를 이용한 전산모사를 수행하여 적정금형설계를 도출하고 적정작업조건을 구축하였다. 그 결과 방진고무 중에서 토크로드부시의 사출성형에서의 에어트랩 발생 등의 공정문제를 최적 캐비티 가장자리 경사각 및 게이트 수를 조절함으로써 캐비티 가장자리에서의 유동선단(flow-front)의 유동정체를 방지하고 유동을 원활하게 하여 해결하였다. 한편 다이내믹 댐퍼의 사출시 충전(filling) 단계에서의 캐비티 비충전으로 인한 미성형 불량은 에어벤트(air-vent) 구를 에어트랩 발생 빈도가 매우 높은 유동선단 상향류와 하향류의 두 흐름이 만나는 지점에 설치함으로써 미성형 불량을 해결하였다. 또한 게이트 위치를 댐퍼 상단에서 중단으로 변경하거나 게이트 수를 증가시킨 경우에 미성형 불량이 K사의 경우보다 개선되었다.

Modified Particle Swarm Optimization with Time Varying Acceleration Coefficients for Economic Load Dispatch with Generator Constraints

  • Abdullah, M.N.;Bakar, A.H.A;Rahim, N.A.;Mokhlis, H.;Illias, H.A.;Jamian, J.J.
    • Journal of Electrical Engineering and Technology
    • /
    • 제9권1호
    • /
    • pp.15-26
    • /
    • 2014
  • This paper proposes a Modified Particle Swarm Optimization with Time Varying Acceleration Coefficients (MPSO-TVAC) for solving economic load dispatch (ELD) problem. Due to prohibited operating zones (POZ) and ramp rate limits of the practical generators, the ELD problems become nonlinear and nonconvex optimization problem. Furthermore, the ELD problem may be more complicated if transmission losses are considered. Particle swarm optimization (PSO) is one of the famous heuristic methods for solving nonconvex problems. However, this method may suffer to trap at local minima especially for multimodal problem. To improve the solution quality and robustness of PSO algorithm, a new best neighbour particle called 'rbest' is proposed. The rbest provides extra information for each particle that is randomly selected from other best particles in order to diversify the movement of particle and avoid premature convergence. The effectiveness of MPSO-TVAC algorithm is tested on different power systems with POZ, ramp-rate limits and transmission loss constraints. To validate the performances of the proposed algorithm, comparative studies have been carried out in terms of convergence characteristic, solution quality, computation time and robustness. Simulation results found that the proposed MPSO-TVAC algorithm has good solution quality and more robust than other methods reported in previous work.

KTX 고속전철 추진제어시스템의 역률제어장치(PFC) 동작특성 분석 (Dynamic Characteristics Analysis on the Power Factor Correction (PFC) System for Propulsion System of KTX High Speed Train)

  • 이을재;이은규;윤차중
    • 한국철도학회:학술대회논문집
    • /
    • 한국철도학회 2011년도 춘계학술대회 논문집
    • /
    • pp.82-92
    • /
    • 2011
  • This paper presents a PFC(Power Factor Correction) system to control the power factor of input current of the converter system which is working in the propulsion system of KTX high speed train. In the KTX train system, initially introduced from ALSTOM, the thyristor converter with phase controlling technique is adopted in the current fed type powering system. The input current induces harmonic losses highly because the waveform becomes rectangular shapes according to the filter inductor current increased as the train speed increasing gradually. Especially the interference with the signalling systems is severe concerned due to high current harmonics on the catenary line. To protect this problem, a frequency trap filter(notch filter) is operating with the input converter system. In this paper, an analysis work and PC simulation have been done on the PFC system to upgrade its performance and maintenance efficiency.

  • PDF

Mailing List Characteristic from Electronic Mail

  • Khaitiyakun, N.;Khunkitti, A.
    • 제어로봇시스템학회:학술대회논문집
    • /
    • 제어로봇시스템학회 2004년도 ICCAS
    • /
    • pp.917-921
    • /
    • 2004
  • Principle of mailing list was distributed messages to all subscribers in one time. But mailing list operation has constructed a network traffic problem. Because mailing list manager distributed mails without concentrate on subscriber network. If our network has many of subscribers, there will be redundant data in traffic channel. Submailing list has purpose to reduce problems. Analyses of mailing list characteristic in electronic mail were a feature of submailing list system, which manage by human hand (Network Administrator). That will cause trouble for network traffic if Network Administrator could not seek for mailing list characteristic from e-mails in due time. This article will present ideas and recognize methodology for automatic working in submailing list system. Recognize step begin with capture process, which use to trap e-mail information from transfer channel. Next process is preparing raw data into recognition format. Then the third one is recognize part and find out confidential factor. The last process is make decision and determine which electronic mail has properties of mailing list characteristic. Afterward deliver result to submailing list for carry on.

  • PDF

혼합시뮬레이터를 사용한 액정 표시기용 비정질 실리콘 박막 트랜지스터의 특성 시뮬레이션 (Simulation of Characteristics of Amorphous-Silicon Thin Film Transistor for Liquid Crystal Display Using the Mixed Simulator)

  • 이상훈;김경호
    • 전자공학회논문지A
    • /
    • 제32A권12호
    • /
    • pp.122-129
    • /
    • 1995
  • The most important feature of a-Si TFT is dense localized states such as dangling bonds which exist in tis bandgap. Electrons trapped by localized states dominate the potential distribution in the active a-Si region ,and influence the performance of a-Si TFT. In this paper, we describe the electrical characteristics of a-Si TFT with respect to trap distribution within bandgap, electron mobility and interface states using 2-Dimensional device simulator and compare the result of simulation with measurements. Using the mixed-mode simulator, we can predict the potential variation of pixel which causes residual image problem during the turn-off of a-Si TFT driving circuit. Therefore it is possible to consider trade-off between potential variation of pixel and turn-on current of a-Si TFT for the optimized driving circuit.

  • PDF

Artificial Potential Field 와 Simulated Annealing을 이용한 이동로봇의 실시간 경로계획 (The Real-time Path Planning Using Artificial Potential Field and Simulated Annealing for Mobile Robot)

  • 전재현;박민규;이민철
    • 제어로봇시스템학회:학술대회논문집
    • /
    • 제어로봇시스템학회 2000년도 제15차 학술회의논문집
    • /
    • pp.256-256
    • /
    • 2000
  • In this parer, we present a real-time path planning algorithm which is integrated the artificial potential field(APF) and simulated annealing(SA) methods for mobile robot. The APF method in path planning has gained popularity since 1990's. It doesn't need the modeling of the complex configuration space of robot, and is easy to apply the path planning with simple computation. However, there is a major problem with APF method. It is the formation of local minima that can trap the robot before reaching its goal. So, to provide local minima recovery, we apply the SA method. The effectiveness of the proposed algorithm is verified through simulation.

  • PDF

퍼지 추론 기반의 유전알고리즘 선택 연산자 (Fuzzy Reasoning based Selection Operator for Genetic Algorithm)

  • 서기성;현수환
    • 한국지능시스템학회논문지
    • /
    • 제18권1호
    • /
    • pp.116-121
    • /
    • 2008
  • 본 논문은 퍼지추론을 통해 개체의 유사성과 적합도의 종합적 평가를 이용한 유전알고리즘의 선택연산자를 제안한다. 일반적으로 많이 쓰이는 적합도에 의한 선택 방법에 비해서 유사성에 대한 요소를 추가함으로써 조기에 수렴하는 현상의 감소와 성능향상을 얻을 수 있다. 또한 기존의 세대형(generational)에서 점진형(steady-state)으로 진화 수행방식의 변형을 통해 보조적인 향상을 제공할 수 있다. 제안된 방법을 f3deceptive 와 f5trap 등의 기만적 문제에 대해서 실험하였으며, 다른 연산자를 이용한 결과에 비하여 우수한 성능을 얻을 수 있었다.