• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 2002년도 가을 학술발표회 논문집
• /
• pp.435-442
• /
• 2002

In a multicell box structure, distortional warping normal stress due to warping of cross section and transverse bending normal stress of walls due to distortion of cross section may consider as significant stresses unless distortion of box section is appropriately restricted. Nevertheless, during the past decades, no evaluation of distortional warping and transverse bending resistances for the multicell box section has been performed owing to geometric complexity and Insufficient information with respect to the distortion of multicell box section. The objective of present study is to evaluate the distortional warping and transverse bending resistances for the distortion of multicell box section and to validate the resistances through box girder analyses using multicell box beam element developed and conventional shell element. This developed box beam element has nine degrees of freedom per node including the effect of distortion.

• 항공우주시스템공학회지
• /
• 제12권6호
• /
• pp.41-49
• /
• 2018

이번 연구에서는 복합재료 박벽보(thin-walled beam)에서 시위 방향으로 단일 셀의 비대칭성 단면을 가지는 모델을 선정하여, 단면의 형상에 대한 이론적인 동특성을 연구하였다. 이를 위해 전단 변형 효과(transverse shear effect)와 와핑 구속 효과(warping restraint effect), 보의 길이 방향으로 일정한 테이퍼비와 기하학적 단면비 등을 고려하고, 비대칭 단면의 와핑 함수 보정을 통해 수학적 모델링을 수행하였다. 그 결과에 따라, 고려한 단면의 질량 계수와 강성 계수 및 고유 진동수 등의 특성을 조사하였다. 특히, 단면의 비대칭성, 와핑 함수를 보정하지 않은 경우, 모델의 테이퍼비와 단면비 등이 고유 진동수에 미치는 영향을 비교 분석하였다.

• 한국지진공학회:학술대회논문집
• /
• 한국지진공학회 2005년도 학술발표회 논문집
• /
• pp.345-352
• /
• 2005

The purpose of this study is to analyze the stress-strain behavior of confined concrete columns with rectangular section. Uniaxial concentric loading tests of nineteen concrete columns with rectangular section ($150{\times}100$, $250{\times}100$, $350{\times}100\;mm$) were conducted. The main variables are transverse reinforcement volumetric ratio and spacing, cross tie arrangement, cross-section aspect ratio, and concrete strength. From the present experiments, it was found that the increase of transverse reinforcement ratio increases the maximum stress and ductility ratio and the reduction of the spacing of transverse reinforcement also increases the ductility and effective confinement. The increase of the aspect ratio of the cross-section does not influence much the stress-strain behavior of rectangular columns within the aspect ratio range of 3.5. The effect of concrete strength on ductility is also discussed.

• 대한조선학회논문집
• /
• 제53권3호
• /
• pp.188-194
• /
• 2016

Accurate estimation of shear flows in thin-walled beam section is the key issue to evaluate shear stress distribution of ship hull transverse section under the shear forces acting on hull girder. It is regarded that the method using the warping functions obtained by finite element formulation is the state of the art of this field. Recently, however, IACS took effect the new version of CSR in which direct calculation process of shear flow was suggested. In the direct calculation process, shear flow of ship hull section can be obtained by the addition of determinate and indeterminate shear flows calculated respectively. So, in this paper, the shear flow evaluation codes based on the process proposed by IACS CSR and warping function based method were developed respectively. The calculated results of shear flows for the several examples of ship sections were compared with each other and considered in detail.

• 한국음향학회지
• /
• 제19권6호
• /
• pp.10-16
• /
• 2000

휴대용 방광 용적 측정시스템을 위한 새로운 추정 알고리듬을 제안하였다. 먼저 주어진 화상 데이터로부터 방광벽과 소변의 경계 끝점을 추출하고, 이로부터 축의 길이를 계산한 후 필터링하여 단면을 얻는다. 방광의 모양의 불규칙성을 고려하여 종단면과 횡단면 두 개의 데이터로부터 단면을 얻은 후 종단면으로 면적을 구하고 이를 횡단면에 적용하여 부피를 계산한다. 반대의 과정을 거쳐 또 하나의 부피 추정치를 얻고 이를 평균하여 실제 부피를 추정하였다. 제안된 알고리듬과 기존의 추정방법을 비교한 결과 제안된 방법에서 좋은 결과를 얻었다.

• 한국소음진동공학회논문집
• /
• 제20권5호
• /
• pp.492-501
• /
• 2010

Equations of motion of thin-walled composite H-type cross-section beams incorporating a number of nonclassical effects of transverse shear and primary and secondary warping, and anisotropy of constituent materials are derived. The vibrational characteristics of a composite thin-walled beam exhibiting the circumferentially asymmetric stiffness system(CAS) and the circumferentially uniform stiffness system(CUS) are exploited in connection with the bending-transverse shear coupling and the bending-twist coupling resulting from directional properties of fiber reinforced composite materials.

• Ocean and Polar Research
• /
• 제28권3호
• /
• pp.237-243
• /
• 2006

The ages of sandfish, Arctoscopus japoninis sampled from the eastern sea of Korea, were determined by the transverse section method of otoliths. Ages were assigned to every individual according to the number of opaque zones, and then fitted to the von Bertalanffy growth equation. Estimated equations were $L_t=25.90(1-e^{-0.2976(t+0.4447)})$ for females and $L_t=21.38(1-e^{-0.2917(t+1.2087)})$ for males, where t is age (year) and $L_t$, is body length (mm) at age t. These two equations were significantly different and the body length of females calculated from the equation was larger than that of males except at 1 year old.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2011년도 추계학술대회 논문집
• /
• pp.130-135
• /
• 2011

A study of the bending-extension-transverse shear coupled random response of the composite beams with thin-walled open sections subjected to various types of concentrated and distributed random excitations is dealt with in this paper. First of all, equations of motion of thin-walled composite H-type cross-section beams incorporating a number of nonclassical effects of transverse shear and primary and secondary warping, and anisotropy of constituent materials are derived. On the basis of derived equations of motion, analytical expressions for the displacement response of the composite beams are derived by using normal mode method combined with frequency response function method.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2001년도 춘계학술대회 논문집
• /
• pp.241-248
• /
• 2001

The ductility of circular hollow reinforced concrete columns with one layer of longitudinal and spiral reinforcement placed near the outside face of the section and the steel tube placed on the inside face of the section is investigated. Such hollow sections are confined through the wall thickness since the steel tube is placed. The results of analytical moment-curvature analyses for such hollow sections are compared with those for the circular section with the sane diameter. In this study, moment-curvature analyses are conducted with Mandel's confined concrete stress-strain relationship in which the effect of confinement is to increase the compression strength and ultimate strain of concrete. The moment-curvature analyses confirmed that the ductility is primarily influenced on the ultimate strain. The variables influenced on the ultimate strain is the ratio and yield strength of confining reinforcement and the compression strength for confined concrete. From this ultimate strain - the transverse reinforcement ratio relationship, the transverse reinforcement ratio for circular hollow reinforced columns with confinement is proposed. The proposed transverse reinforcement ratio is confirmed by experimental results.

• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 2000년도 추계학술발표대회 논문집
• /
• pp.161-164
• /
• 2000

In this paper, a finite element structural analysis for thin-walled open-section composite beams with elastic couplings has been performed. The analysis includes the effects of transverse shear across beam sections, torsion warping and constrained warping. Reissner's semi-complementary energy functional is used to obtain the beam st illness coefficients The bending and torsion related warpings and the shear correct ion factors are obtained as part of the analysis. The resulting theory describes the beam kinematics in terms of the axial, flap and lag bending, flap and lag shear, torsion and torsion-warping deformations. The static response has been validated against finite element predict ions, closed form solutions, and experimental data for rectangular sol id and I-beams with elastic couplings. The free vibration results are also compared with available literature.