• Structural Engineering and Mechanics
• /
• v.73 no.5
• /
• pp.515-527
• /
• 2020

This paper presents a stress field approach for the shear capacity of stirrup-reinforced concrete beams that explicitly incorporates the contribution of principal tensile stresses in concrete. This formulation represents an extension of the variable strut inclination method adopted in the Eurocode 2. In this model, the stress fields in web concrete consist of principal compressive stresses inclined at an angle θ combined with principal tensile stresses oriented along a direction orthogonal to the former (the latter being typically neglected in other formulations). Three different failure mechanisms are identified, from which the strut inclination angle and the corresponding shear strength are determined through equilibrium principles and the static theorem of limit analysis, similar to the EC-2 approach. It is demonstrated that incorporating the contribution of principal tensile stresses of concrete slightly increases the ultimate inclination angle of the compression struts as well as the shear capacity of reinforced concrete beams. The proposed stress field approach improves the prediction of the shear strength in comparison with the Eurocode 2 model, in terms of both accuracy (mean) and precision (CoV), as demonstrated by a broad comparison with more than 200 published experimental results from the literature.

• The korean journal of orthodontics
• /
• v.35 no.1 s.108
• /
• pp.23-34
• /
• 2005

Collective changes caused by orthodontic tooth movement evaluated in a specific treatment modality could give suggestive information on the specific treatment strategy. The aim of this study was to investigate retrospectively the characteristics of the orthodontic tooth movement during surgical-orthodontic treatment in order to provide an effective presurgical orthodontic treatment planning for the maxillary premolar extraction modality In the skeletal Class III malocclusion patient. Pre- and post-treatment dental casts of skeletal Class III malocclusion patients with nonextraction (N=:24) and the maxillary premolar extraction (N=31) were collected. The angulation and inclination measuring gauge(Invisitech Co. Seoul, Korea) was used to evaluate the orthodontic tooth movement. The changes in the maxillary and mandibular dental arch widths were also measured from the canines to the second molars. As a result, more palatal inclination change in the maxillary dentition was found with the premolar extraction modality than with the nonextraction modality. Linear regression analysis showed that the inter-arch width coordination was mainly due to the inclination changes of maxillary posterior teeth We conclude that the indications and proper treatment planning for surgical-orthodontic treatment in skeletal Class III malocclusion with maxillary premolar extraction could depend partly on the magnitude of the transverse inter-arch coordination especially in the maxillary dentition.

• The korean journal of orthodontics
• /
• v.47 no.4
• /
• pp.256-267
• /
• 2017

Objective: To evaluate transverse skeletal and dental changes, including those in the buccolingual dental axis, between patients with skeletal Class III malocclusion and facial asymmetry after bilateral intraoral vertical ramus osteotomy with and without presurgical orthodontic treatment. Methods: This retrospective study included 29 patients with skeletal Class III malocclusion and facial asymmetry including menton deviation > 4 mm from the midsagittal plane. To evaluate changes in transverse skeletal and dental variables (i.e., buccolingual inclination of the upper and lower canines and first molars), the data for 16 patients who underwent conventional orthognathic surgery (CS) were compared with those for 13 patients who underwent preorthodontic orthognathic surgery (POGS), using three-dimensional computed tomography at initial examination, 1 month before surgery, and at 7 days and 1 year after surgery. Results: The 1-year postsurgical examination revealed no significant changes in the postoperative transverse dental axis in the CS group. In the POGS group, the upper first molar inclined lingually on both sides (deviated side, $-1.8^{\circ}{\pm}2.8^{\circ}$, p = 0.044; nondeviated side, $-3.7^{\circ}{\pm}3.3^{\circ}$, p = 0.001) and the lower canine inclined lingually on the nondeviated side ($4.0^{\circ}{\pm}5.4^{\circ}$, p = 0.022) during postsurgical orthodontic treatment. There were no significant differences in the skeletal and dental variables between the two groups at 1 year after surgery. Conclusions: POGS may be a clinically acceptable alternative to CS as a treatment to achieve stable transverse axes of the dentition in both arches in patients with skeletal Class III malocclusion and facial asymmetry.

• Advances in concrete construction
• /
• v.14 no.5
• /
• pp.299-307
• /
• 2022

Cement-based matrixes have low tensile strength and negligible ductility. Adding fibres to these matrixes will improve their mechanical properties and make these composites suitable for structural applications. Post-cracking tensile strength of steel fibers-reinforced cementitious composite materials is directly related to the number of transverse fibers passing through the crack width and the pulling-out behavior of each of the fibers. Therefore, the exact recognition of the pullout behavior of single fibers is necessary to understand the uniaxial tensile and bending behavior of steel fiber-reinforced concrete. In this paper, an experimental study has been carried out on the pullout behavior of 3D (steel fibers with totally two hooks at both ends), 4D (steel fibers with a total of four hooks at both ends), and 5D (steel fibers with totally six hooks at both ends) in which the fibers have been located either perpendicular to the crack width or in an inclined manner. The pullout behavior of the mentioned steel fibers at an inclination angle of 0, 15, 30, 45, and 60 degrees and with embedded lengths of 10, 15, 20, 25, and 30 millimetres is studied in order to explore the simultaneous effect of the inclination angle of the fibers relative to the alongside loading and the embedded length of fibers on the pullout response in each case, including the maximal pullout force, the slip of the maximum point of pullout force, pullout energy, fiber rupture, and concrete matrix spalling. The results showed that the maximum pullout energy in 3D, 4D, and 5D steel fibers with different embedded lengths occurs at 0 to 30° inclination angles. In 5D fibers, maximum pullout energy occurs at a 30° angle with a 25 mm embedded length.

• Journal of Korean Foot and Ankle Society
• /
• v.18 no.1
• /
• pp.14-18
• /
• 2014

Purpose: The purpose of this report is to evaluate the measured values of normal Korean calcaneus by conduct of a cadaveric study. Materials and Methods: A total of 42 calcanei were obtained from Korean cadavers. A digital goniometer was used for measurement of B$\ddot{o}$hler's angle, Gissane angle, posterior facet articular inclination angle, and Fowler-Philip angle of calcaneus. A vernier caliper was used for measurement of the maximal antero-posterior length, maximal transverse width, and maximal height of calcaneus. Results: The average B$\ddot{o}$hler's angle, Gissane angle, posterior facet articular inclination angle, and Fowler-Philip angle was $32.3^{\circ}{\pm}5.0^{\circ}$, $114.4^{\circ}{\pm}8.2^{\circ}$, $61.2^{\circ}{\pm}4.4^{\circ}$, and $60.3^{\circ}{\pm}7.6^{\circ}$. The average maximal antero-posterior length, maximal transverse width, and maximal height of calcaneus was $74.2{\pm}3.0mm$, $43.0{\pm}4.0mm$, and $42.5{\pm}3.0mm$. Conclusion: The measured values of normal Korean calcaneus were lower than the values reported in the international literature. Therefore, development of appropriate instruments reflecting the anatomical characteristics of Koreans will be needed.

• KCI Concrete Journal
• /
• v.11 no.3
• /
• pp.5-17
• /
• 1999

In recent years. the concept of the modified compression field theory (MCFT) was develped and applied to the analysis of reinforced concrete beams subjected to shear, moment, and axial load. Although too complex for regular use in the shear design or beams. the procedure has value in its ability to provide a rational method of anlysis and design for reinforced concrete members. The objective of this paper is to review the MCFT and apply it for the prediction of the response and shear strength of reinforced concrete beams A Parametric analysis was Performed on a reinforced T-section concrete beam to evaluate and compare the effects of concrete strength. longitudinal reinforcement ratio shear reinforcement ratio, and shear span to depth ratio in two different approaches the MCFT and the ACI code. The analytical study showed that the concrete contribution to shear strength by the MCFT was higher than the one by the ACI code in beams without stirrups, while it was lower with stirrups. On the other hand. shear reinforcement contribution predicted by the MCFT was much higher than the one by the ACI code. This is because the inclination angle of shear crack is much smaller than 45$^{\circ}$assumed in the ACI code.

• Korean Journal of Applied Biomechanics
• /
• v.31 no.3
• /
• pp.168-175
• /
• 2021

Objective: To investigate the static and dynamic analysis of ankle joint complex between subjects with chronic ankle instability (CAI) and healthy controls. Method: A total of 38 subjects and CAI group (N=19) and healthy control (N=19) participated in this first study. Variables that were measured in this study were as follows: 1) Subtalar joint axis inclination and deviation 2) Rearfoot angle 3) Navicular drop test 4) Heel alignment view in alignment analysis. Intra Correlation Coefficient (ICC) is used for reliability. A secondary 17 subjects are recruited including 9 of CAI and healthy for gait analysis between group. Lower extremity sagittal, frontal, and transverse kinematics were measured. All data were analyzed to ensemble curve analysis. Results: 1) There were statistically significant differences in standing rearfoot, navicular drop, heel alignment view, subtalar joint (STJ) inclination and deviation. 2) Only in sagittal, meaningful difference is showed during walking in gait analysis. Conclusion: Morphological problem can affect ankle sprain in aspect of structure with no relation to compensation of neuromuscular.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.22 no.6
• /
• pp.654-659
• /
• 2016

Recently, the passenger ship 'Sewol' capsized with an abrupt inclination while she was making a small angle alteration. It is very important to fully understand the concepts, causes and relevant corrections for a ship's transverse inclination, which is classified into heel, list and loll. In this study, the concept, development and calculation of loll were well considered and the actual magnitude of the angle of loll was simulated in a box-shaped model-ship experiment. The experimental values and its development according to different values of negative stability were compared with calculated values. In the results, experimental values for the angle of loll coincided closely with calculated values and the model inclined symmetrically on both port and starboard sides indicating an outstanding feature of loll. This study is expected to expand the concept of loll and help in the analysis of capsize incidents with unknown causes. Further experimental research or case studies concerning the risk of inappropriate correction for loll arising from misunderstandings will be needed.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.30 no.3
• /
• pp.232-240
• /
• 2008

Purpose: This study was performed to evaluate transverse changes of proximal segment after bilateral sagittal split ramus osteotomy (BSSRO) using 3-D CT in mandibular prognathism. Patients and methods: Twenty-two patients who underwent BSSRO for mandibular set-back in class III malocclusion without facial asymmetry were examined. Miniplates were used for the fixation after BSSRO. Facial CT was taken before and after BSSRO within 3 months. Frontal-ramal inclination (FRI), inter-gonial width (IGW) and intercondylar width (ICW) were measured in 3-D CT images using V-works $4.0^{TM}$ program. Student t-test was used to compare the changes between pre- and post-operative measurements using SPSS 10.0 program. Results: 1. Mean peroperative FRI value ($12.87{\pm}3.43^{\circ}$) was slightly increased to postoperative value ($14.13{\pm}3.72^{\circ}$) (p < 0.05). The average FRI increased 10.42% and the range was from $-2.46^{\circ}$ to $3.34^{\circ}$. 2. Mean peroperative IGW ($99.01{\pm}5.36$) was slightly decreased to postoperative IGW ($96.51{\pm}5.88mm$) (p < 0.05). The average IGW decreased 2.52 % and the range was from $-6.61^{\circ}$ to 0.91 mm. 3. Mean preoperative ICW ($125.01{\pm}5.30mm$) was slightly decreased to postoperative ICW ($125.40{\pm}5.45mm$) (p < 0.05). There is no significant difference between pre- and post-operative ICW. 4. There was significant correlationship between FRI difference and IGW difference (p < 0.05). Conclusions: These results indicate that the lower ramus of the proximal segment is moved inward after BSSRO procedure for mandibular set-back.

• Journal of The Korean Astronomical Society
• /
• v.32 no.1
• /
• pp.65-73
• /
• 1999

In this study we present a new improved nonlinear calibration method for vector magnetograms made by the Solar Flare Telescope of BOAO. To identify Fe I 6302.5 line, we have scanned monochromatic images of the line integrated over filter passband, changing the location of the central transmission wavelength of a Lyot filter. Then we obtained a filter-convolved line profile, which is in good agreement with spectral atlas data provided by the Sacramento Peak Solar Observatory. The line profile has been used to derive calibration coefficients of longitudinal and transverse fields, employing the conventional line slope method under the weak field approximation. Our improved nonlinear calibration method has also been used to calculate theoretical Stokes polarization signals with various angles of inclination of magnetic fields. For its numerical test, we have compared input magnetic fields with the calibrated ones, which have been derived from the new improved non-linear method and the conventional method respectively. The numerical test shows that the calibrated fields obtained from the improved method are consistent with the input fields, but not with those from the conventional method. Finally, we applied our new improved method to a dipole model which characterizes a typical field configuration of a single, round sunspot. It is noted that the conventional method remarkably underestimates the transverse field component near the inner penumbra.