• Journal of the Korea Safety Management & Science
• /
• v.15 no.1
• /
• pp.177-182
• /
• 2013

More and more medium and small enterprises do business across the world according to generalization of online shopping mall such as eBay and Amazon. But high export and import transportation cost make weak the price competitive power of medium and small enterprises products. Then this paper deals with the development of new business model which can reduce the transportation cost for global logistics through efficiently overcoming the constraints as length, size, and weight of product. We explain this model with application for company which export the automobile parts. We can expect the transportation cost reduction by 50%.

• Korean Chemical Engineering Research
• /
• v.52 no.1
• /
• pp.63-67
• /
• 2014

The effects of reactant composition on the particle size distribution, synthetic yield, and density of Phenol-formaldehyde bead were examined in the synthesis of resol-type phenolic resin. Decrease of the content of DI water as dispersion media can increase the viscosity of suspension, which may cause the difference of particle size distribution and aggregation. The average particle size of synthesized beads was also decreased with the increasing content of stabilizer which can affect the interfacial area. The amount of crosslinking agent showed no effect on the size distribution and synthetic yield, but it made a decrease in the density of synthesized bead due to the macropore in the bead.

• Journal of Korean Society of Transportation
• /
• v.32 no.4
• /
• pp.347-356
• /
• 2014

Passenger cars occupy about 74% among registered vehicles in Korea and the ratio of transportation mode sharing is approximately 60% in the passenger transport part. However, there is no statistics related to travel characteristics of passenger cars, and official statistics are estimated from O/D travel data. Thus, National Transportation DataBase Center in KOTI has attempted to construct various statistical data through Korea Vehicle Use Survey. Based on these data, Analysis of Variance (ANOVA) was conducted to investigate the differences in travel characteristics of each analysis group. As a result, all of the explanatory variables(weekday vs. weekend, metropolitan area vs. non-metropolitan area, male vs. female, commute time vs. other time, routine purpose vs. non-routine purpose) were found to be different across households. In addition, travel distances per trip of weekday, metropolitan area, male, commute time, and non-routine purpose are longer than the opposite variables. Also, the trip distances of small size(1 to 2 persons) households are shorter compared to large size(more than 5 persons) households.

• Geomechanics and Engineering
• /
• v.16 no.4
• /
• pp.415-421
• /
• 2018

A location determining method is proposed for critical sliding surface in the stability analysis of the filling materials in karst caves. First, a preliminary location of the sliding surface is determined based on simulation results which includes displacement contour and plastic zone. The sliding surface will locate on the bottom contact interface when the friction angle is relative small. However, a weakened contact interface always becomes the critical sliding surface no matter what the friction angle is. Then when the friction angle becomes larger, the critical sliding surface inside fillings can be determined by a parabola, the coefficient of which increases linearly with the friction angle under the same cohesion. Finally, the critical sliding surface approximately remains unchanged with friction angle. The influence of cohesion is similar to that of friction angle. Although affected by shape, size or position of the karst cave, the critical sliding surface mainly depends on both friction angle and cohesion. Thus, this method is always useful in determining the critical sliding surface.

• Journal of Biosystems Engineering
• /
• v.24 no.5
• /
• pp.399-406
• /
• 1999

This study was conducted to investigate the labor requirements and transportation cost of paddy for the different harvest and transportation systems for obtaining a basic reference to the improvement of present harvest-transportation systems. One hundred and eighty five farm households with sack type combine harvester and thirty farm households with bulk type combine harvester were surveyed for thirty counties from eight provinces except jeju and also eleven Rice Processing Complex were covered for this survey. This survey was carried from 8th. October 1997 to 5th. November 1997. For the labor requirements, bulk trailer system require 6.8th/ha, 10.3/ha for sack harvest-tractor trailer, and 8.8h/ha for bulk harvest-container bag. The machinery utilization cost for the different paddy harvest-transportation systems, combine sack harvest-tractor trailer system is 282 thousand won/ha, and most economical compared with other systems. Combine bulk harvest with tractor system was 416 thousands won/ha and combine bulk harvest with container bag system was 446 thousands won/ha. In order to propagate bulk harvest-transportation system, a proper bulk transportation means with considering road condition in the paddy field and paddy size should be developed, and considering cycle time it appeared that the proper capacity of bulk container was 3.5ton at the present.

• Proceedings of the KOR-KST Conference
• /
• 1999.10a
• /
• pp.440-445
• /
• 1999

• Journal of Korean Society of Transportation
• /
• v.34 no.2
• /
• pp.135-145
• /
• 2016

This study assumes a vehicle choice model based on the multinomial model and analyzes the vehicle choice behaviors of consumer. An SP survey targeting drivers was implemented and data was collected for model estimates, with the possible choice options of the survey takers limited to gasoline, HEV, PHEV, and EV vehicles. The explanatory variable mostly displayed a significance level of under 5%, and excluding variables for price and fuel the remaining variables were all consistent with the logical direction with the plus (+) sign and the results were determined to be rational. Consumers selecting mid-size & full-size vehicles are able to afford more than consumers that selected other vehicle types, so there was relatively little consideration given to low fuel costs when compared to vehicle price. For this reason, it was determined that for the full-size vehicle model the fuel variable could be disregarded. Socio-economic variables that were statistically significant were the age and infor variables for the sub-compact & compact, the age, infor and inc3 variables for the mid-sized & full-size vehicles.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.14 no.2
• /
• pp.14-23
• /
• 2015

This study was intended to evaluate the feasibility of the vehicle detector using a coil sensor. For the evaluation, the research team built a test environment for the detector consisting of a oscillation circuit, data collecting circuit, data monitoring and saving circuit, etc. As the result of the frequency analysis of the detector from the test environment, it was verified for the detector using a coil sensor to generate stable frequencies. In addition, the ease of construction and management was tested by comparing the size of cutting areas, consumption of installation materials, and installation time for a traditional loop detector and the detector using a coil sensor. As a result, the installation of the detector using a coil sensor requires less size of cutting areas, consumption of installation materials, and installation time.

• Journal of Magnetics
• /
• v.22 no.1
• /
• pp.162-167
• /
• 2017

Magnetic spiral-type microrobots, which are driven by a rotating magnetic field, have excellent locomotive abilities, whereas their medical applications are limited in the terms of function, such as the ability to drill in blood vessels. In this study, we propose a new robot with superior applications using a magnetic spiral-type machine. The proposed robot can be applied to stent transportation and installation without a catheter. In particular, the robot can be applied to the cardiovascular system, cerebrovascular disease, and nonvascular stent applications depending on the robot size. The robot consists of two independent spiral-type machines and four magnets in total. We controlled directions of thrust force of the two machines, respectively, for active locomotion with a task. We conducted a preliminary validation of the proposed robot for stent transportation and installation through experimental analyses.

• Interaction and multiscale mechanics
• /
• v.5 no.2
• /
• pp.145-155
• /
• 2012

The thin-plate structure and the box-beam structure are two typical welded structures in railway vehicles. Because of their structure complexity, bigger size and multi-seams, welding residual distortion which occur in welding process bring unfavorable effect on the quality of welding products manufacturing and service. As a result, welding distortion forecasting and control become an important and urgent research topic in railway vehicles. In this paper, three different numerical methods are presented corresponding to three typical types of welded structures of railway vehicles and welding deformation are simulated. Consistence of numerical results and experimental data proves the correctness of models and feasibility of simulation methods.