• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.16 no.6
• /
• pp.506-513
• /
• 2004

The objective of this paper is to evaluate the economic performance of latent and sensible energy transportation systems. LCC (Life-Cycle Cost) analysis is a practical method and a guideline for evaluating the economic performance of considered systems during the Life-Cycle Period. By comparing the LCC of alternatives, The most ideal alternative is determined which has the lowest LCC. It is concluded that the cost of STA (Solution Transportation Absorption system) can be reduced by 67% to that of sensible energy transportation for study period with 10 km transportation distance.

• Journal of Electrical Engineering and Technology
• /
• v.11 no.2
• /
• pp.361-366
• /
• 2016

Although the permanent magnet linear synchronous motor is a motor useful for transportation systems thanks to its high speed, high acceleration and deceleration, the linear motor generally has armatures installed on the full length of the transport path. It results in the increase in material costs and manufacturing time. As a means to solve this problem a stationary discontinuous armature system is suggested. However, it involves the following two issues. The first issue is it is impossible to control the mover in the section where any armature is not installed as armatures are distributed. The second one is increasing cogging force due to the ends of the armatures. Therefore, this study aims to solve these problems by adjusting intervals between armatures to control the mover anywhere, and to design the interval between armatures optimally to minimize the end cogging force. The suitable distance was deduced. It addressed the problems and showed suitability for long distance transportation PMLSM.

• Journal of the Society of Naval Architects of Korea
• /
• v.45 no.6
• /
• pp.646-655
• /
• 2008

A main issue about production management of shipyards is to efficiently manage the work in process and logistics. However, so far the management of a transporter for moving building blocks has not been efficiently performed. To solve the issues, optimal block transporting scheduling system is developed for minimizing of the travel distance without overload of a transporter. To implement the developed system, a hybrid optimization algorithm for an optimal block transportation scheduling is proposed by combining the genetic algorithm and the ant algorithm. Finally, to evaluate the applicability of the developed system, it is applied to a block transportation scheduling problem of shipyards. The result shows that the developed system can generate the optimal block transportation scheduling of a transporter which minimizes the travel distance without overload of the transporter.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.67 no.12
• /
• pp.1723-1728
• /
• 2018

In order to investigate the voltage drop compensation effect of AT for domestic railway vehicle base, the parameters of AT voltage drop of railroad car base are Z3 (Impedance of feeder line), Xn ( Distance from railroad vehicle to AT to SS), and Dn (distance between both ATs of railway vehicle).In addition, when installed in a SSP for a railway vehicle base, there is no AT and feeder line in the railway vehicle base except for the SSP for the main line and the SSP for the railway vehicle base, so that if zero or ignored, the AC single-phase two- It can be confirmed that it becomes a form.

• Journal of the Korean Regional Science Association
• /
• v.33 no.1
• /
• pp.29-41
• /
• 2017

This study proposes an integrated accessibility measurement algorithm, which is applied to the Seoul Metropolitan public transportation system consisting of bus and subway networks, and analyzes the result. We construct a public transportation network graph linking bus-subway networks and take the time distance as the link weight in the graph. We develop a time-distance algorithm to measure the time distance between each pair of transit stations based on the T-card transaction database. The average travel time between nodes has been computed via the shortest-path algorithm applied to the time-distance matrix, which is obtained from the average speed of each transit route in the T-card transaction database. Here the walking time between nodes is also taken into account if walking is involved. The integrated time-distance accessibility of each node in the Seoul Metropolitan public transportation system has been computed from the T-card data of 2013. We make a comparison between the results and those of the bus system and of the subway system, and analyze the spatial patterns. This study is the first attempt to measure the integrated time-distance accessibility for the Seoul Metropolitan public transportation system consisting of 16,277 nodes with 600 bus routes and 16 subway lines.

• Journal of the Economic Geographical Society of Korea
• /
• v.9 no.2
• /
• pp.149-166
• /
• 2006

The purpose of this study is to produce time-distance cartograms based on the various Korean transportation networks, and to analyze the spatial structure of time-distance accessibilities. For the purpose this study attempts to develop continuous area cartogram by utilizing Wolf's algorithm for creating contiguous cartogram in ArcGIS 9. The absolute physical space was transformed to the functional space indexed by time-distances along various transportation networks in Korea. We examined the differences in the time-distance accessibilities among transportation networks. This study makes a comparison between the spatial structure of time-distance accessibility of KTX network with them of existing railroad network, as well as with them of road network. In order to clarify the spatial structures of time-distance accessibilities, we restructured them on the time-distance circular diagrams and performing Multi-Dimensional Scaling analysis. Overall structure of time-distance accessibilities shows similar patterns: The time distances are shrinked a lot along the Seoul-Busan axis, while coastal parts, in particular the eastern part of the county, are shrinked relatively little via all transportation networks. The Road network affects significantly on the accessibilities of cities in Gangwon-do and Gyeonggi-do, while railway network affects on the accessibilities of cities in Jeolla-do and Gyeongsang-do in general. When we compared the time-distance accessibilities based on the 5 largest cities, Seoul appears as the most accessible city from/to all other cities in Korea. We can also find significant changes in the time-distance accessibility between KTX network and existing railroad network. Cities along the KTX network, in particular cities which has KTX stops, improved significantly in time-distance accessibilities.

• KIEAE Journal
• /
• v.14 no.1
• /
• pp.131-138
• /
• 2014

The recent interests in securing alternative resource have increased due to environmental issues and exhaustion of natural resources. The government notices production of recycled aggregate using waste concrete as the substitute of the natural aggregate. However, It's important to reduce environmental burden being inevitably made in the process producing recycled aggregate. In this study, the scenarios of transportation distance were set in the transportation phase of production of recycled aggregate. In addition, The possibility of emissions and reduction of carbon dioxide were studied depending on the scenarios. For this study, data about a amount of waste concrete, transportation distance, kind of vehicle, the number of required vehicle, fuel efficiency of vehicle and etc were gathered from 15 companies of intermediate treatment and 60 constructions sites located in Daegu city and Kyungpook area. Based on those data, fuel consumptions and $CO_2$ emissions according to the transportation scheme of waste concrete were calculated. As a result of the study, the emission of carbon dioxide was possible to be reduced by 27.8~75.4% depending on the scenarios of transportation distance.

• Journal of Korean Society of Transportation
• /
• v.27 no.1
• /
• pp.35-42
• /
• 2009

One of the problems we face up at the time of planning or improving a transportation transfer facility is which modes and how close we have to put together. The goal here is to keep the connecting transportation mode as close as possible to the prime transit mode, so people travel a minimum transfer path, a distance from one mode to another. Too much a physical separation between modes will limit, even with an intensive improvement of the component links, the level of service of a transfer path as a whole. This study defined a transfer path as the whole stretch of the distance from an arrival point of one mode to the departure point of the connecting mode. The transfer path was divided into three typical segments as side walk, stairways, and indoor corridors. Preference surveys were made for each of these segments, resulting in relative resistance. The sum of individual segments weighted with the relative resistance will make a transfer resistance of the path, which in turn constitutes a transfer utility function together with the overall satisfaction score obtained by the interview survey. The transfer utility function has been utilized to evaluate the transfer distance between modes.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.22 no.7
• /
• pp.31-39
• /
• 2014

Recently, as Intelligent Transportation System (ITS) and self-driving system become influential in the ground transportation system, automotive radar systems have been actively studied among the various radar systems to implement the vehicle collision detection system and distance measurement system between vehicles. Most of the automotive radars are Frequency Modulated Continuous Wave (FMCW) radar type which can calculate distance and velocity of target by estimating the frequency difference between the transmitted signal and received signal. Therefore, accurate frequency estimation is very important in the FMCW radar system. For this reason, to improve the measurement accuracy of the FMCW radar, Reverse Directional FRI (RD-FRI) Super-Resolution technique which has high frequency estimation accuracy is applied to the FMCW radar system. The feasibility of the proposed technique is evaluated with simulation results and compared with FFT and conventional Super-Resolution techniques. The simulation results show that the proposed technique estimates the frequency with high accuracy and the distance with centimeter accuracy.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.12 no.11
• /
• pp.5321-5329
• /
• 2011

Space Layout has been an issue in the facet of reducing the co2 in that the transportation sector has been to represent almost more than 20% of the total energy consumption for decades. Beside the development of the more efficient transportation systems, an efficient space layout makes it possible to reduce the amount of energy consumption in the transportation sector through allocating the sub-spaces in such an arrangement of minimizing the travel distances. In line with this thinking, this research aims at implementing a simulator which can calculate the vehicle-based travel distance upon a certain space layout. Based on the findings that the vehicle-based travels take place between the two functionally related sub-spaces, this research addresses a method of calculating the vehicle-based travel distance by multiplying the traffic volume of each sub-spaces by the travel distance to the other connected sub-spaces.