Journal of Electrical Engineering and Technology

The Korean Institute of Electrical Engineers (대한전기학회)
권호 표지
DOI QR코드

DOI QR Code

A Design of Optimal Interval between Armatures in Long Distance Transportation PMLSM for End Cogging Force Reduction

  • Park, Eui-Jong (Dept. of Electrical Engineering, Chosun Univerity) ;
  • Jung, Sang-Yong (School of Electronic and Electrical Engineering, Sungkyunkwan University) ;
  • Kim, Yong-Jae (Dept. of Electrical Engineering, Chosun University)
  • Received : 2015.06.25
  • Accepted : 2015.10.07
  • Published : 2016.03.01
Download PDF
⟨ Previous Next ⟩

Abstract

Although the permanent magnet linear synchronous motor is a motor useful for transportation systems thanks to its high speed, high acceleration and deceleration, the linear motor generally has armatures installed on the full length of the transport path. It results in the increase in material costs and manufacturing time. As a means to solve this problem a stationary discontinuous armature system is suggested. However, it involves the following two issues. The first issue is it is impossible to control the mover in the section where any armature is not installed as armatures are distributed. The second one is increasing cogging force due to the ends of the armatures. Therefore, this study aims to solve these problems by adjusting intervals between armatures to control the mover anywhere, and to design the interval between armatures optimally to minimize the end cogging force. The suitable distance was deduced. It addressed the problems and showed suitability for long distance transportation PMLSM.

Keywords

References

  1. K. C. Lim, J.K. Woo, G. H. Kang, J. P. Hong, and G. T. Kim, “Detent force minimization techniques in permanent magnet linear synchronous motor,” IEEE Trans. on Magn., Vol. 38, No. 2, pp. 1157-1160, 2002. https://doi.org/10.1109/20.996296
  2. R. Hellinger, and P. Mnich, “Linear motor-powered transportation: history, present status, and future outlook,” Proc. of the IEEE, Vol. 97, No. 11, pp. 1892-1900, 2009. https://doi.org/10.1109/JPROC.2009.2030249
  3. Ruiwu Cao, Ming Cheng, Mi, C.C., Wei Hua, “Influence of leading design parameters on the force performance of a complementary and modular linear flux-switching permanent-magnet motor,” Trans. Ind. Electron., Vol. 61, Is. 5, pp. 2165-2175, 2014. https://doi.org/10.1109/TIE.2013.2271603
  4. Y. Kim, and H. Dohmeki, “Driving characteristics analysis of stationary discontinuous armature permanent magnet linear synchronous motor for factory automation systems,” Electrical engineering, Vol. 89, No. 8, pp. 617-627, 2007. https://doi.org/10.1007/s00202-007-0072-4
  5. T. Yoshimura, H.J. Kim, M. Watada, S. Torii, D. Ebihara, “Analysis of the reduction of detent force in a permanent magnet linear synchronous motor,” IEEE Trans. On Magn., Vol. 31, No. 6, pp. 3728-3730, 1995. https://doi.org/10.1109/20.489752