• Journal of the Society of Disaster Information
• /
• v.18 no.4
• /
• pp.754-768
• /
• 2022

Purpose: The purpose of this study is to derive improvements through user satisfaction analysis for the smart traffic safety system being applied to improve traffic safety. Method: A survey-based IPA analysis was used to derive system and service improvements for groups of drivers and pedestrians. Result: As a result of the analysis, both drivers and pedestrian groups showed that Quadrant 1(Keep up the Good Work) was 'Perception of risk information', and Quadrant 3(Low Priority) was 'Reliability of warning information'. On the other hand, 'AI display suitability', which was analyzed as Quadrant 1(Keep up the Good Work) in the driver group, was found to be Quadrant 3(Low priority) in the pedestrian group. Conclusion: Satisfaction factors for smart pedestrian safety systems may vary depending on users, and it is judged that user-centered system construction and service provision are necessary.

• Wind and Structures
• /
• v.35 no.4
• /
• pp.269-285
• /
• 2022

The pressure-mitigating effects of a high-speed train passing through a tunnel with a partially reduced cross-section are investigated via the numerical approach. A compressible, three-dimensional RNG k-ε turbulence model and a hybrid mesh strategy are adopted to reproduce that event, which is validated by the moving model test. Three step-like tunnel forms and two additional transitions at the tunnel junction are proposed and their aerodynamic performance is compared and scrutinized with a constant cross-sectional tunnel as the benchmark. The results show that the tunnel step is unrelated to the pressure mitigation effects since the case of a double-step tunnel has no advantage in comparison to a single-step tunnel, but the excavated volume is an essential matter. The pressure peaks are reduced at different levels along with the increase of the excavated earth volume and the peaks are either fitted with power or logarithmic function relationships. In addition, the Arc and Oblique-transitions have very limited gaps, and their pressure curves are identical to each other, whereas the Rec-transition leads to relatively lower pressure peaks in C_Pmax, C_Pmin, and ΔC_P, with 5.2%, 4.0%, and 4.1% relieved compared with Oblique-transition. This study could provide guidance for the design of the novel railway tunnel.

• Journal of the Korean Society of Safety
• /
• v.26 no.4
• /
• pp.120-126
• /
• 2011

Under the current law or system, the range of traffic accident on the crosswalk does not reflect the characteristics of traffic accident and the pedestrian's walking pattern. Thus, this study conducted a video recording survey on the 250 spots which are high to traffic accident rate of pedestrian-vehicle to reset the range of traffic accident on or near the crosswalk considering the characteristics of traffic accident and the pedestrian's walking pattern. Based on the collected data through a video recording survey, this study analyzed the pattern of pedestrians and extracted the variables influenced in the pedestrian's walking pattern. After conducting the regression analysis, this study made the model of measuring the range of traffic accident on the crosswalk. Through all processes these, this study reset the range of traffic accident on the crosswalk which could minimize the disadvantages of pedestrian when they have an accident on the crosswalk and ensure the right of way of pedestrian.

• Journal of the Korean Society of Safety
• /
• v.38 no.4
• /
• pp.54-59
• /
• 2023

The relationship between near misses and major accidents can be confirmed using the ratios proposed by Heinrich and Bird. Systematic reviews of previous national and international studies did not reveal the assessment process used in near-miss management systems. In this study, a model was developed for assessing near misses and major factors were derived through case application. By reviewing national and international literature, 14 factors were selected for each dimension of the P2T (people, procedure, technology) model. To identify the causal relationship between accidents and these factors, a near-miss assessment model was developed using a Bayesian network. In addition, a sensitivity analysis was conducted to derive the major factors. To verify the validity of the model, near-miss data obtained from the ethylene production process were applied. As a result, "PE2 (education)," "PR1 (procedure)," and "TE1 (equipment and facility not installed)" were derived as the major factors causing near misses in this process. If actual workplace data are applied to the near-miss assessment model developed in this study, results that are unique to the workplace can be confirmed. In addition, scientific safety management is possible only when priority is given through sensitivity analysis.

• Journal of the Korea Safety Management & Science
• /
• v.19 no.4
• /
• pp.87-94
• /
• 2017

The purpose of this study is to provide basic data to help ensure the safety and enhance industrial competitiveness of plant construction projects by analyzing the safety management status of, mainly, chemical engineering plant construction projects, and proposing specific measures and models to reduce human/educational, technical/systemic, institutional disasters. This study was done using literature research and case study/empirical study methods. The results of this study are summarized as follows. First, we classified the major disasters from the quarterly released 'major diaster cases in construction business' from Korea Occupational Safety and Health Agency according to the type of construction and presented the causes and prevention measures.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.12 no.4 s.27
• /
• pp.247-252
• /
• 2006

In this study, the index for operation evaluation index for safety management system that can be facilitated as the assessment tool for system operation monitoring and operation outcome and the safety management system of shipping companies has been developed. By using this index, this study may provide the instruction or consultation for frequent facilitation by comprehensively recording the required knowledge for each operation stage for the companies that prepares the introduction of the safety management system and companies that already introduced the system to maintain and develop the system. In addition, when working on internal audit and assessing the system operation outcome, it may be facilitated as the assessment tool to contribute in continuous improvement and development. This index is consisted of 11 large categories, 35 items of medium categories and 447 small categories.

• Safety and Health at Work
• /
• v.9 no.2
• /
• pp.159-163
• /
• 2018

Background: Fatigue and sleepiness are inter-related and common among road transport drivers. In this study, sleep deprivation and fatigue among chemical transportation drivers were examined. Methods: A cross-sectional study surveying 107 drivers from three hazardous types of chemical production and transportation industries (nonflammable gases, flammable gases, and flammable liquids) was conducted. Data on sleep deprivation were collected using questionnaires of the Stanford Sleeping Scale and the Groningen Sleep Quality Scale. Fatigue was assessed using an interview questionnaire and a flicker fusion instrument. Results: Chemical drivers had a mean sleeping scale (Stanford Sleeping Scale) of 1.98 (standard deviation 1.00) and had a mean score of 1.89 (standard deviation 2.06) on the Groningen Sleep Quality Scale. High-risk drivers had higher scores in both the Stanford Sleeping Scale and the Groningen Sleep Quality Scale with a mean score of 2.59 and 4.62, respectively, and those differences reached statistical significance (p < 0.05). The prevalence of fatigue, as assessed through a critical flicker fusion analyzer, subjective fatigue question, and either of the instruments, was 32.32%, 16.16%, and 43.43%, respectively. Drivers who slept <7 hours and had poor sleep quality were found to have more fatigue than those who slept enough and well. Drivers who had a more sleepiness score resulted in significantly more objective fatigue than those who had a less sleepiness score. Conclusion: Sleep quality and sleeping hour can affect a driver's fatigue. Optimization of work-rest model should be considered to improve productivity, driver retention, and road safety.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.65 no.3
• /
• pp.526-531
• /
• 2016

This paper presents an experimental study on the optimal settings for the selected DC fault relay (50F) to improve the operating performance for the high-speed circuit breaker on DC feeding system which ensure safety within rolling stock maintenance depot. In this study, current supplied to overhead contact wire was calculated on 1 ms interval to analyze the correction values of DC fault selective relay for the operation of current supply cutout. Particularly, standards for the accurate detection of accidents between an electric railway vehicle and the electric power facilities are shown by investigating the optimal correction values for detection of fault current, and the results indicated that it takes about 213 ms for the DC fault selective relay(50F) to fully open. In the future, the correction values of DC fault selective relay suggested in this paper will be used as the reference values of protective relay for the safe operation of DC electric railroad system such as urban railway.

• Korean Chemical Engineering Research
• /
• v.55 no.4
• /
• pp.497-502
• /
• 2017

Estimation of accident cost is a sound and great safety indicator on determining accurate occupational safety and health prevention. Just like in Korea, Heinrich ratio analysis of (1:4) between direct and indirect costs has been become widely used in safety management because of its simplicity. In this study four major categories of uninsured (indirect) cost items and 18 sub-categories of uninsured (indirect) cost items were identified. To determine and validate the importance and necessity of the results of a literature review an expert or professional surveyed had been analyses using the SPSS 18.0, where in the participants whose expertize is in the field of compensation and safety. Based on the results of survey all participants all uninsured (indirect) cost items classified was important and necessary when accidents occurred. Despite recognition of expert on the classification of uninsured (indirect) cost items, it is quite difficult to make generalization for all kind of costs in occupational accident case due to different nature of business for each industry.

• Journal of the Korean Society of Safety
• /
• v.30 no.5
• /
• pp.100-107
• /
• 2015

Korea government has established and enforced countermeasures about the various policy of industrial accident prevention. Recent chemical accidents included hazardous materials. Exposure to these chemicals can cause serious environmental poisoning and various health problems. The key factor causing these major accidents may be associated with the mistake in workers' safety behaviors. Some researchers noted workers' safety behaviors may be related to workers' safety climate. In this research, a survey was conducted to explore workers' safety behaviors and safety climate in a large petrochemical company in Korea. The company processes major petrochemical materials and any spills can be hazardous and cause chemical disasters. In this study, we explored one petrochemical company to investigate three hypotheses. 593 workers were surveyed for this study. We checked association between workers' safety behavior and safety climate. The survey result shows the people who have safety climate do safe behavior.