• Nuclear Engineering and Technology
• /
• 제52권8호
• /
• pp.1638-1649
• /
• 2020

In the case of a severe accident in a Light Water Reactor, the issue of late release of fission products, from the primary circuit surfaces is of particular concern due to the direct impact on the source term. CsI is the main iodine compound present in the primary circuit and can be deposited as particles or condensed species. Its chemistry can be affected by the presence of molybdenum, and can lead to the formation of gaseous iodine. The present work studied chemical reactions on the surfaces involving gaseous iodine release. CsI and MoO₃ were used to highlight the effects of carrier gas composition and oxygen partial pressure on the reactions. The results revealed a noticeable effect of the presence of molybdenum on the formation of gaseous iodine, mainly identified as molecular iodine. In addition, the oxygen partial pressure prevailing in the studied conditions was an influential parameter in the reaction.

• 융합보안논문지
• /
• 제23권1호
• /
• pp.3-8
• /
• 2023

다중 도메인 광 전송망은 기본적으로 상호 운용되지 않으며 전체 망차원의 통합 오케스트레이션 메커니즘과 경로 제공 메커니즘이 필요하다. 더불어 망의 생존성 보장은 중요한 쟁점 중의 하나이다. MPLS-TP(Multi-Protocol Label Switching-Transport Profile)에서는 다양한 보호·복구 방안을 표준으로 정의하고 있으나 보호·복구 경로를 계산·선정하는 방안에 대해서는 언급하고 있지 않다. 따라서 광회선패킷 통합망 차원에서 보호·복구 충돌을 최소화하여 통합망 전 영역에 걸쳐 신속한 보호·복구가 가능한 경로를 계산·설정하는 알고리즘이 필요하다. 본 논문에서는 다중링-메시 토폴로지 형태로 구성된 T-SDN 망에서 신속한 보호·복구가 가능한 경로를 계산·설정하는 알고리즘을 제안하였다.

• Bulletin of the Korean Chemical Society
• /
• 제33권2호
• /
• pp.670-674
• /
• 2012

The photovoltaic performance of solid-state dye-sensitized solar cells employing hole transport material (HTM), 2,2',7,7'-tetrakis-(N,N-di-p-methoxyphenyl-amine)-9,9'-spirobifluorene (spiro-MeOTAD), has been investigated in terms of HTM overlayer thickness. Two important parameters, soak time and spin-coating rate, are varied to control the HTM thickness. Decrease in the period of loading the spiro-MeOTAD solution on $TiO_2$ layer (soak time) leads to decrease in the HTM overlayer thickness, whereas decrease in spin-coating rate increases the HTM overlayer thickness. Photocurrent density and fill factor increase with decreasing the overlayer thickness, whereas open-circuit voltage remains almost unchanged. The improved photocurrent density is mainly ascribed to the enhanced charge transport rate, associated with the improved charge collection efficiency. Among the studied HTM overlayer thicknesses, ca. 230 nm-thick HTM overlayer demonstrates best efficiency of 4.5% at AM 1.5G one sun light intensity.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2005년도 추계종합학술대회
• /
• pp.237-240
• /
• 2005

We propose a fully converged Ethernet and TDM transport system. Developed Ethernet and TDM convergence system can support not only L2VPN service and premium multimedia service based on MPLS protocol but also TDM leased line service, simultaneously. Developed convergence system can provide high reliability for Ethernet data due to support protection and restoration function of circuit based networks. Evaluation for Ethernet and TDM path was successfully performed to show the typical application of the proposed system in the legacy networks.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2004년도 춘계학술대회 논문집 전기기기 및 에너지변환시스템부문
• /
• pp.12-14
• /
• 2004

Superconducting transmission power cable is one of interesting parts in power application using high temperature superconducting wire. One of import ant parameters in high-temperature superconduting (HTSC) cable design is transport current distribution because it is related with current transmission capacity and AC loss. In this paper, the transport current distribution at conducting layers was investigated through the analysis of the equivalent circuit for HTSC power cable with shield layer and compared with the case of without shield layer. The transport current distribution due to of the contact resistance and the pitch was improved in the case of HTSC power cable with shield layer from the analysis.

• 대한전기학회논문지:전기기기및에너지변환시스템부문B
• /
• 제50권1호
• /
• pp.10-14
• /
• 2001

The superconducting transmission cable is one of interesting part in power application using high temperature superconducting wire. One important parameter in HTS cable design is transport current sharing because it is related with current transmission capacity and loss. In this paper, we calculate self inductances of each layer and mutual inductances between two layers from magnetic field energy, and current sharing of each layer for 4-layer cable using the electric circuit model which contain inductance and resistance (by joint and AC loss). Also, transport current losses which are calculated by monoblock model and Norris equation are compared. As a results, outer layer has always larger transport current than inner layer, and current capacity of each layer is largely influenced by resistance per unit cable length. As a conclusion, for high current uniformity and low AC loss, we have to decrease inductances themselves or those differences.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2004년도 하계학술대회 논문집 B
• /
• pp.1133-1135
• /
• 2004

Superconducting transmission power cable is one of interesting parts in power application using high temperature superconducting wire. One of important parameters in high-temperature superconducting (HTSC) cable design is transport current distribution because it is related with current transmission capacity and ac loss. In this paper, the transport current and magnetic field distributions at conducting layers were investigated through the analysis of the equivalent circuit for HTSC power cable with shield layer. The transport current distribution due to the pitch length and winding direction was improved in case of HTSC power cable with shield layer.

• 한국ITS학회:학술대회논문집
• /
• 한국ITS학회 2007년도 제6회 추계학술대회 및 정기총회
• /
• pp.144-148
• /
• 2007

• Journal of Communications and Networks
• /
• 제7권1호
• /
• pp.1-12
• /
• 2005

Ethernet is being deployed in metropolitan area networks (MANs) as a lower-cost alternative to SONET-based infrastructures. MANs are usually required to support common communication services, such as voice and frame relay, based on legacy synchronous TDM technology in addition to asynchronous packet data transport. This paper addresses the clock synchronization problem that arises when transporting synchronous services over an asynchronous packet infrastructure, such as Ethernet. A novel algorithm for clock synchronization is presented combining time-stamp methods used in the network time protocol (NTP) with signal processing techniques applied to measured packet interarrival times. The algorithm achieves the frequency accuracy, stability, low drift, holdover performance, and rapid convergence required for viable emulation of TDM circuit services over Ethernet.

• 한국ITS학회 논문지
• /
• 제2권2호
• /
• pp.97-101
• /
• 2003

본 논문에서는 Ku-band용 주파수 하향변환기에 사용할 수 있는 MMIC (monolithic microwave integrated circuit) mixer를 InGaAs/GaAs p-HEMT 공정의 Schottky diode를 이용하여 설계 및 제작하였다. 일반적인 double balanced mixer의 구조에서 IF단자와 LO 단자를 서로 바꾸어 설계함으로써 mC chip의 크기를 크게 줄일 수 있었다. 설계된 MMIC mixer는 RF(14.0 - 14.5 GHz)와 IF(12.252 - 12.752 GHz)의 주파수 대역에서 사용할 수 있다. 제작된 초소형의 MMIC mixer chip은 크기가 3.3 m X 3.0 m이고, on-wafer측정 결과 9.8 dB 이하의 변환손실과 23 dB 이상의 RF-to-IF 격리도 및 38 dB 이상의 LO-to-IF 격리도의 특성을 각각 얻었다.