• Transactions of the Korean hydrogen and new energy society
• /
• v.22 no.3
• /
• pp.363-371
• /
• 2011

In this paper, a three-dimensional hydrogen desorption model is developed to precisely study the hydrogen desorption kinetics and resultant heat and mass transport phenomena in metal hydride hydrogen storage vessels. The metal hydride hydrogen desorption model, i.e. governed by the conservation of mass, momentum, and thermal energy is first experimentally validated against the temperature evolution data measured on a cylindrical $LaNi_5$ metal hydride vessel. The equilibrium pressure used for hydrogen desorption simulations is derived as a function of H/M atomic ratio and temperature based on the experimental data in the literature. The numerical simulation results agree well with experimental data and the 3D desorption model successfully captures key experimental trends during hydrogen desorption process. Both the simulation and experiment display an initial sharp decrease in the temperature mainly caused by relatively slow heat supply rate from the vessel external wall. On the other hand, the effect of heat supply becomes influential at the latter stages, leading to smooth increase in the vessel temperature in both simulation and experiment. This numerical study provides the fundamental understanding of detailed heat and mass transfer phenomena during hydrogen desorption process and further indicates that efficient design of storage vessel and heating system is critical to achieve fast hydrogen discharging performance.

• Journal of Microbiology and Biotechnology
• /
• v.24 no.1
• /
• pp.97-105
• /
• 2014

Quorum quenching (QQ) with a microbial vessel has recently been reported as an economically feasible biofouling control platform in a membrane bioreactor (MBR) for wastewater treatment. In this study, a quorum quenching MBR with a ceramic microbial vessel (CMV) was designed to overcome the extremely low F/M ratio inside a microbial vessel. The CMV was prepared with a monolithic ceramic microporous membrane and AHL-degrading QQ bacteria, Pseudomonas sp. 1A1. The "inner flow feeding mode" was introduced, under which fresh feed was supplied to the MBR only through the center lumen in the CMV. The inner flow feeding mode facilitated nutrient transport to QQ bacteria in the CMV and thus enabled relatively long-term maintenance of cell viability. The quorum quenching effect of the CMV on controlling membrane biofouling in the MBR was more pronounced with the inner flow feeding mode, which was identified by the slower increase in the transmembrane pressure as well as by the visual observation of a biocake that formed on the used membrane surface. In the QQ MBR with the CMV, the concentrations of extracellular polymeric substances were substantially decreased in the biocake on the membrane surface compared with those in the conventional MBR. The CMV also showed its potential with effective biofouling control over long-term operation of the QQ MBR.

• The Journal of shipping and logistics
• /
• v.34 no.4
• /
• pp.615-635
• /
• 2018

Using data from 2008 to 2017, this study analyzed the financial characteristics of offshore freight shipping companies in Korea, categorized by vessel type, and their impact on business performance. The analysis showed an upward trend in the overall debt ratio of offshore freight transport companies and differences in the financial characteristics of each vessel type as well as the major factors affecting business performance. In particular, the significant factors affecting the ROA performance of the business are the size of business and debt ratio in the LPG line; the growth rate in the bulk line; the size of business, debt ratio, and year in the general freight line; and the size of business, growth rate, entertainment expense rate, debt ratio, and year in the full container line. Therefore, each shipping company needs to recognize differences in key financial factors affecting its performance based on vessel type, implement proactive measures, and diversify its vessel portfolio.

• Journal of Fisheries and Marine Sciences Education
• /
• v.25 no.3
• /
• pp.697-704
• /
• 2013

The aim of this paper is to represent about the actual conditions of manpower supply in seaman's competency certificate of fishing vessel. Data used here were based on Korea Seafarer's Statistical Year Book(2007~2011) issued by Ministry of Land, Transport, Maritime Affairs and Alma Mater of employed Seafarer's issued by Korea Seafarer's Welfare & Employment Center, and concerned various laws. The results are as follows : 1. The demanding officers(DO) in the present fishing vessels as minimum boarding standard of Ships Officers Act figured up 5,929 persons totally. Those are divided into officers of 2,988 persons and engineers of 2,941 persons. 2. Comparing DO with now boarding officer members, incase of Coastal & near-ocean fishing vessels exceeded approximately 11.5%(478 persons), but Ocean-going fishing vessels were short supply about 26.7%(477 persons). 3. In spite of ships officers' lacking in Ocean-going, boarding officers until now are only 3.5%(133 persons) annually of alma members in various fisheries schools.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2022.06a
• /
• pp.155-156
• /
• 2022

Efficient operation of ships can transport cargo to ports safer and faster, and reduce fuel costs. Therefore, in this study, the pattern was analyzed using AIS data of ships passing near Busan Port, a representative port in Korea. The analysis of vessel traffic patterns was approached with a grid-based node generation method, which can be used for research such as optimal route and route prediction.

• Journal of Navigation and Port Research
• /
• v.32 no.3
• /
• pp.159-165
• /
• 2008

The coastal shipping transport for containers had been serviced by Hanjin Transpotation Co., Ltd. and Korea Express Co., Ltd. from 1995. But Korea Express Co., Ltd. and Hanjin Transpotation Co., Ltd had stopped a coastal shipping transport service routed Busan-Incheon bemuse of getting worse of operation balance in 1999 and 2006 respectively. As a result of these situations, korean-flag and foreign-flag fleets are having difficulty in handling T/S cargos and in-time transport service among inter-ports in korea. As shippers also use lorry to transport their cargos than using costal shipping, it occurs increasing in national logistics' cost as well as time-consuming due to congestion on the road. Therefore, this paper identifies not anly current costal shipping transport systems but also those problems and analyses a economic effect in case of participation in the costal shipping transport service by foreign-flag vessel using monte carlo simulation.

• Nuclear Engineering and Technology
• /
• v.34 no.3
• /
• pp.187-201
• /
• 2002

The KN-12 cask is designed to transport 12 PWR spent nuclear fuels and to comply with the requirements of Korea Atomic Energy Act, IAEA Safety Standards Series No.57-1 and US 10 CFR Part 71 for a Type B(U)F package. It provides containment, radiation shielding, structural integrity, criticality control and heat removal for normal transport and hypothetical accident conditions. W.H 14$\times$14, 16$\times$16 and 17$\times$17 fuel assemblies with maximum allowable initial enrichment of 5.0 wt.%, maximum average burn-up of 50,000 MWD/MTU and minimum cooling time of 7 years being used in Korea will be loaded and subsequently transported under dry and wet conditions. A forged cylindrical cask body which constitutes the containment vessel is closed by a cask lid. Polyethylene rods for neutron shielding are arranged in two rows of longitudinal bore holes in the cask body wall. A fuel basket to accommodate up to 12 PWR fuel assemblies provides support of the fuels, control of criticality and a path to dissipate heat. Impact limiters to absorb the impact energy under the hypothetical accident conditions are attacked at the top and at the bottom side of the cask during transport. Handling weight loaded with water is 74.8 tons and transport weight loaded with water with the impact limiters is 84.3 tons. The cask will be licensed in accordance with Korea Atomic Energy Act 3nd fabricated in Korea in accordance with ASME B&PV Code Section 111, Division 3.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2003.06a
• /
• pp.1438-1441
• /
• 2003

The project for "Development of Advanced Spent Fuel Management Technology" has a plan of a demonstration for the Advanced Management Process in the hot cell of IMEF. The Advanced Management Process are being developed for efficient and safe management of spent fuels. For the demonstration, several devices which are used to safely transport and handle nuclear materials without scattering have been derived by analyzing the Advanced Management Process, object nuclear material and modules of process equipment and performing graphical simulation of transportation/handling by computers. For verification, powder transportation vessel and handling device have been designed and manufactured. And several tests such as transporting, grappling, rotating the vessel have been performed. Also, the design requirements of transportation/handling equipment have been analyzed based on test results and process studies. The developed design requirements in this research will be used as the design data for the Advanced Management Process.

• Journal of Korea Port Economic Association
• /
• v.28 no.4
• /
• pp.1-37
• /
• 2012

The purpose of this paper is to estimate the social costs induced by various transport modes such as truck, rail and sea vessel. For this purpose, we introduce the damage function of each transport modes, and estimate social costs for 10 items using Meta Analysis. As a results, this study can find that shipping is the most efficient transport mode because it gives the lowest social costs among them. This study also find that the iso-cost transport distance that gives the equal social costs between the transport modes. Our methodology can be thought somewhat inferior to the Contingent Valuation Methods, however the advantage of this methodology is that we can decomposite the total social costs into item by item and can apply it to other researches.

• Journal of Korea Ship Safrty Technology Authority
• /
• s.28
• /
• pp.36-45
• /
• 2010

While the vessel become bigger and high speed, navigational passages become narrow due to an enlargement of all sorts of new ports, sea-crossing bridges and anchorages, leading to the high probability of marine accidents. Furthermore, a constant increase in the maritime transportation and the traffic volume on the sea led to a variety of sea traffic environments and it is a trend for the demand for the sea transportation environment to increase steadily. At this point of time, the Ministry of Land, Transport, and Maritime Affairs introduced the Korea Maritime Safety Laws evaluating the degree that The Safety Audit System for maritime transport, which evaluates the degree that all kinds of port facilities installed temporarily or installed into navigational passages, and the installations and repair constructions of S.O.C. facilities affect ships' traffic safety, was introduced through Korea Maritime Safety Laws and went into effect from November 28th, 2009. This study was performed to introduce an outline including the concept and purpose of the Maritime Safety Audit(MSA) system for maritime transport and the technological guidelines for scientific and standardized enforcement, thereby analyzing the system.