• Proceedings of the Korean Vacuum Society Conference
• /
• 2000.02a
• /
• pp.116-116
• /
• 2000

질화물 반도체는 LED, LD, Transistor, 그리고 Photodetector 등 광소자 및 전자소자를 실현할 수 있는 소재로써 최근에 각광 받고 있으며, 또한 국·내외적으로 연구가 활발히 진행되고 잇다. 질화물 발광 다이오드 제작에는 소자의 효율과 수명시간의 향상을 위하여 질화물 반도체와 금속과의 접합시 고 품질의 오믹 접합이 필수적이다. 특히 p-형 GaN의 경우에는 높은 정공 농도를 갖는 p-형 GaN를 얻기가 어렵고 GaN의 일함수에 비하여 높은 일함수를 갖는 금속이 없기 때문에 매우 낮은 접합 저항을 가지며 안정성이 매우 우수한 금 접합을 얻기가 어렵다고 알려져 있다. 또한, GaN 계열의 발광 다이오드는 일반적으로 표면 발광 다이오드 형태로 제작되기 때문에 p-형 GaN 층의 오믹 접촉으로 사용되는 금속의 전기적 특성뿐만 아니라 발광 다이오드의 활성층에서 발광되어 나오는 빛에 대한 투과도 또한 우수하여야 발광 다이오드의 효율이 우수해진다. 본 연구에서는 p-형 GaN층의 접합 금속으로 Pt(80nm)과 Ni(5nm)/Au(7nm)를 사용하여 InGaN/GaN 다중양자우물 구조의 발광 다이오드를 제작하여 전기적 특성 및 발광효율을 측정하였다. 그리고, Pt(80nm)과 p-형 GaN와의 접합시 온도 변화에 따른 전기적 특성을 TLM 방법으로 조사하고, 가시광선 영역에서의 빛에 대한 투과도를 UV/VIS spectrometer, X-ray reflectivity, 그리고 Atomic Force Microscopy 등을 이용하여 분석하였다.

• Journal of the Korean Vacuum Society
• /
• v.12 no.4
• /
• pp.257-262
• /
• 2003

The structure and optical properties of n-type and p-type porous silicon (PS) prepared by the chemical etching in the light and the dark, respectively, are reported in this paper. Microstructural features of the samples are mainly investigated by SEM, AFM XRDGI techniques. Also, their optical properties are investigated by photoluminescence (PL) and Fourier transform infrared absorption measurements. In the n-type PS, the room temperature photoluminescence is observed in a visible range from 500 nm to 650 nm in contrast to that in the blue region (400∼650 nm) in p-type PS. Further, semi-transparent Cu films in thickness range of ∼40 nm are deposited by rf-magnetron sputtering on PS to investigate the I-V characteristics of the samples.

• Korean Journal of Metals and Materials
• /
• v.46 no.7
• /
• pp.464-470
• /
• 2008

Metallic nanostructures have great potential for bio-chemical sensor applications due to the excitation of localized surface plasmon and its sensitive response to environmental change. Unlike the commonly explored absorption-based sensing, the optical scattering provides single particle detection scheme. For the localized surface plasmon resonance spectroscopy, the metallic nanostructures with controlled shape and size have been usually fabricated on adhesion-layer pre-coated transparent glass substrates. In this study, we calculated the optical scattering properties of plasmonic Au nanodisc using a discrete dipole approximation method and analyzed the effect of adhesion layer on them. Our result also indicates that there is a trade-off between the surface plasmon damping and the capability of supporting nanostructures in determining the optimal thickness of adhesion layer. Marginal thickness of Ti adhesion layer for supporting Au nanostructures fabricated on a silica glass substrate was experimentally analyzed by an adhesion strength test using a nano-indentation technique.

• Applied Chemistry for Engineering
• /
• v.17 no.6
• /
• pp.644-647
• /
• 2006

The indium zinc oxide (IZO) thin films were deposited using a radio frequency reactive magnetron sputtering method. Among the various processing variables, $O_{2}$ concentration and annealing temperature after deposition were selected and the optical, electrical, and structural properties of IZO thin films were investigated. As the $O_{2}$ concentration increased, the deposition rate of IZO thin films decreased, the resistivity increased and the transmittance slightly increased. According to atomic force microscopy analysis, the IZO films deposited at pure Ar showed rough surface and those deposited with $O_{2}$ addition exhibited relatively smooth surface. The IZO thin films deposited at pure Ar were annealed at 250, 350, and $450^{\circ}C$, respectively. The IZO thin film deposited at pure Ar showed the lowest transmittance and resistivity and resistivity greatly increased at the annealing temperature exceeding $250^{\circ}C$. The higher annealing temperature IZO films were annealed at, the smoother surface the films showed. The x-ray diffraction revealed that IZO films annealed at higher temperature had better crystalline structures.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2014.02a
• /
• pp.344-344
• /
• 2014

Transparent amorphous oxide semiconductors such as a In-Ga-Zn-O (a-IGZO) have advantages for large area electronic devices; e.g., uniform deposition at a large area, optical transparency, a smooth surface, and large electron mobility >10 cm2/Vs, which is more than an order of magnitude larger than that of hydrogen amorphous silicon (a-Si;H).1) Thin film transistors (TFTs) that employ amorphous oxide semiconductors such as ZnO, In-Ga-Zn-O, or Hf-In-Zn-O (HIZO) are currently subject of intensive study owing to their high potential for application in flat panel displays. The device fabrication process involves a series of thin film deposition and photolithographic patterning steps. In order to minimize contamination, the substrates usually undergo a cleaning procedure using deionized water, before and after the growth of thin films by sputtering methods. The devices structure were fabricated top-contact gate TFTs using the a-IGZO films on the plastic substrates. The channel width and length were 80 and 20 um, respectively. The source and drain electrode regions were defined by photolithography and wet etching process. The electrodes consisting of Ti(15 nm)/Al(120 nm)/Ti(15nm) trilayers were deposited by direct current sputtering. The 30 nm thickness active IGZO layer deposited by rf magnetron sputtering at room temperature. The deposition condition is as follows: a rf power 200 W, a pressure of 5 mtorr, 10% of oxygen [O2/(O2+Ar)=0.1], and room temperature. A 9-nm-thick Al2O3 layer was formed as a first, third gate insulator by ALD deposition. A 290-nm-thick SS6908 organic dielectrics formed as second gate insulator by spin-coating. The schematic structure of the IGZO TFT is top gate contact geometry device structure for typical TFTs fabricated in this study. Drain current (IDS) versus drain-source voltage (VDS) output characteristics curve of a IGZO TFTs fabricated using the 3-layer gate insulator on a plastic substrate and log(IDS)-gate voltage (VG) characteristics for typical IGZO TFTs. The TFTs device has a channel width (W) of $80{\mu}m$ and a channel length (L) of $20{\mu}m$. The IDS-VDS curves showed well-defined transistor characteristics with saturation effects at VG>-10 V and VDS>-20 V for the inkjet printing IGZO device. The carrier charge mobility was determined to be 15.18 cm^2 V-1s-1 with FET threshold voltage of -3 V and on/off current ratio 10^9.

• Current Photovoltaic Research
• /
• v.7 no.4
• /
• pp.97-102
• /
• 2019

Bifacial and semitransparent hydrogenated amorphous silicon (a-Si:H) thin-film solar cells in p-i-n configuration were prepared with front and rear transparent conducting oxide (TCO) electrodes using plasma-enhanced chemical vapor deposition method. Fluorine-doped tin oxide and tin-doped indium oxide films were used as front and rear TCO contacts, respectively. Film thickness of intrinsic a-Si:H absorber layers were controlled from 150 nm to 450 nm by changing deposition time. The dependence of performance characteristics of solar cells on the front and rear illumination direction were investigated. For front illumination, gradual increase in the short-circuit current density (J_SC) from 10.59 mA/㎠ to 14.19 mA/㎠ was obtained, whereas slight decreases from 0.83 V to 0.81 V for the open-circuit voltage (V_OC) and from 68.43% to 65.75% for fill factor (FF) were observed. The average optical transmittance in the wavelength region of 380 ~ 780 nm of the solar cells decreased gradually from 22.76% to 15.67% as the absorber thickness was changed from 150 nm to 450 nm. In case of the solar cells under rear illumination condition, the J_SC increased from 10.81 to 12.64 mA/㎠ and the FF deceased from 66.63% to 61.85%, while the V_OC values were maintained at 0.80 V with increasing the absorber thickness from 150 nm to 450 nm. By optimizing the deposition parameters, a high-quality bifacial and semitransparent a-Si:H solar cell with 350 nm-thick i-a-Si:H absorber layer exhibited the conversion efficiencies of 7.69% for front illumination and 6.40% for rear illumination, and average visible optical transmittance of 17.20%.

• Journal of the Korean Applied Science and Technology
• /
• v.31 no.4
• /
• pp.584-594
• /
• 2014

To increase of surface hydrophilicity of polymeric thin films is an important approaching technique for introduction of self-cleaning and/or antifogging properties on the surfaces of those films. In general, hydrophilic surface can be produced by coating non ionic surfactants or by increasing surface energy. Various non-ionic surfactants, such as Tween, Span, and PEG-PPG block copolymers were selected for our experiments, because they are cheap and well soluble in toluene system as well as they contain several reactive hydroxy fuctional groups with coupling agents. Blending conditions influence the PET film surface hydrophilicities. However, the introduction of only these surfactants on the surface of PET films did not show the high durability of hydrophilic properties after washing with water. To improve the durability two types of coupling agents such as epoxide and diisocyanate were adopted. Contact angle of water on hydrophilically coated PET film surface with 6 wt% of isophrone diisocyanate(IPDI) containing coating solution was reached to $8.7^{\circ}$, which was an indirect evidence for very high surface hydrophilicity. A light(500 nm of wavelength) transmittance value of coated PET film was changed only from 87% to 85% with keeping a good transparent property. This film can be usable for self-cleaning film industries.

• Current Photovoltaic Research
• /
• v.8 no.3
• /
• pp.102-106
• /
• 2020

In this paper, the effect of MoSe₂ on the contact resistance (R_C) of the transparent conducting oxide (TCO) and Mo junction in the scribed P2 region of the Cu(In,Ga)Se₂ (CIGS) solar module was analyzed. The CIGS/Mo junction becomes ohmic-contact by MoSe₂, so the formation of the MoSe₂ layer is essential. However, the CIGS solar module has a TCO/MoSe₂/Mo junction in the P2 region due to structural differences from the cell. The contact resistance (R_C) of the P2 region was calculated using the transmission line method, and MoSe₂ was confirmed to increase R_C of the TCO/Mo junction. B doped ZnO (BZO) was used as TCO, and when BZO/MoSe₂ junction was formed, conduction band offset (CBO) of 0.6 eV was generated due to the difference in their electron affinities. It is expected that this CBO acts as a carrier transport barrier that disturbs the flow of current, resulting in increased R_C. In order to reduce the R_C caused by CBO, MoSe₂ must be made thin in a CIGS solar module.

• Journal of the Korean Ceramic Society
• /
• v.39 no.3
• /
• pp.233-239
• /
• 2002

Reflection properties of $SiO_2$/ITO (Indium Tin Oxide) thin films coated for electromagnetic shielding, anti-static and anti-reflection on the front surface in CRT were studied. The behavior of reflectance as a function of thickness of $SiO_2$/ITO was investigated and applied to theoretical anti0reflection model of double layers and three layers. As the thickness of ITO layer increased, the deviation from theoretical value increased because uniformity of film deteriorated by pore. Because of the effect of mixed layer of $SiO_2$ and ITO, experimental reflectance showed better acceptance to the three layer antireflection model of $SiO_2$/$SiO_2$+ITO/ITO than the two layer model. Based on the theoretical antireflection design, the double layer whose thickness of $SiO_2$ and ITO were 90, 65 nm, respectively appear 2.5% in reflectance at standard wavelength, 550 nm. This phenomenon was similar to theoretical reflectance in visual range.

• Journal of the Korean Vacuum Society
• /
• v.21 no.1
• /
• pp.22-28
• /
• 2012

Transparent dye-sensitized solar cells have been widely investigated for the application to building integrated photovoltaic system. Thin film Si-based solar cells are emerging as a substitute for the dye-sensitized solar cells because their merits of well-established manufacturing processes. Since the selective transmitting layer transmits visible light and reflects infrared light, the solar cell efficiency increases with the introduction of the selective transmitting layer. In this work, AlTiO thin films were grown as the selective transmitting layer by cost-effective sputter deposition and their transmittances were improved by controlling deposition parameters.