• 한국정보디스플레이학회:학술대회논문집
• /
• 2008.10a
• /
• pp.254-257
• /
• 2008

We have investigated the effect of source/drain electrode deposition method on a performance of top gate structured ZnO TFT performance. TFT using S/D of ITO film, consisted of bi-layer which deposited by ion beam assisted sputtering at the initial stage then deposited by DC magnetron sputtering, showed better performance compared to that using S/D of ITO deposited by just DC magnetron sputtering. Two ITO films exhibited different grain shapes and these resulted in different etching properties. We also suspect that charge trapping on the glass substrate (back channel) during the ITO film deposition may influence the characteristics of top gate structured ZnO TFT.

• Journal of Information Display
• /
• v.11 no.2
• /
• pp.52-56
• /
• 2010

High-efficiency organic light-emitting diodes (OLEDs) based on multilayer transparent electrodes (MTEs) are reported. The dielectric/metal/dielectric (DMD) multilayer electrode based on a thin silver layer achieved high sheet conductance as small as $6{\Omega}/sp$ and a tuning capability in the optical and electrical properties by engineering the inner and outer dielectric layers. In the conventional normal bottom-emitting structure, a DMD-based OLED can be fabricated with 90% higher forward luminous efficiency and 30% higher external quantum efficiency (EQE) compared to ITO-based devices. Special attention was paid to the optimization method of such MTE structure considering both the injection and optical structures.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.02a
• /
• pp.175-175
• /
• 2013

염료감응형 태양전지(Dye Sensitized Solar Cells; DSSC)에서 투명전극(Transparent Conducting Oxide; TCO)으로 사용되는 ITO, FTO의 경우 자원의 희소성과 고온에 취약하며 취성과 같은 단점 등이 있다. Graphene은 단원자층의 얇은 물질로써 우수한 전도도와 투과도, 고강도와 고탄성의 특성들을 가진다. 이러한 특성들을 가지는 Graphene을 기존의 투명전극을 대체하여 DSSC의 작업전극에 적용 하였다. 본 실험에서 사용된 그래핀 시트는 근적외선을 source로 하는 RTA (Rapid Thermal Annealing)장비에 탄화수소 기반의 gas를 주입하여 Ni위에 성장시켰으며, 습식방법인 용액Etching 방식을 사용하여 유리판 위에 전사시켰다. 전사된 Graphene 투명전극의 전기적 특성과 광학적 특성을 평가하기 위해 4 point probe, FT-IR, 마이크로 Raman분광법, 광학현미경 및 투과도를 측정하여 평가 하였다. 전사된 Graphene 투명전극을 염료감응형 태양전지 작업전극에 적용하여, DSSC소자를 제작하고, Solar Simulator로 광전변환효율 및 EIS(Electrochemical Impedance Spectroscopy)를 측정하여 기존의 FTO로 만든 DSSC와 비교하였다.

• Journal of the Semiconductor & Display Technology
• /
• v.18 no.1
• /
• pp.87-91
• /
• 2019

As a highly conductive and transparent electrode, ITO/Ag/ITO multilayers are fabricated using an in-line sputtering method. Optimal thickness conditions have been investigated in terms of the optical transmittance and the electrical conductance. Considering the optical properties, in this study, the experimental characteristics are analyzed based on theoretical phenomena, and they are compared with the simulated results. The simulations are based on the finite-difference-time-domain (FDTD) method in solving linear Maxwell equations. Consequently, the results showed that ITO/Ag/ITO multilayer structures with respective thicknesses of 39.2 nm/10.7 nm/39.2 nm are most suitable with an average transmittance of about 87% calculated for wavelengths ranging from 400-800 nm and a sheet resistance of about $7.1{\Omega}/{\square}$.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.30 no.10
• /
• pp.609-614
• /
• 2017

The proposed stretchable transparent electrodes based on silver nanowires (AgNWs) were prepared on a polyurethane (PU) substrate. In order toavoid the surface roughness caused by the silver nanowires, a titanium oxide ($TiO_2$) buffer layer was addedby coating and heating the organometallic sol-gel solution. The fabricated stretchable electrodes showedan electrical sheet resistance of $24{\Omega}sq^{-1}$, 78% transmittance at 550 nm, and an average surface roughness below 5 nm. Furthermore, the AgNW-based electrode maintained its initial electrical resistance under 130% strain testing conditions, without the assistance of additional conductive polymer layers. In this paper, the critical role of the $TiO_2$ buffer layer between the AgNW network and the PU substrate has been discussed.

• Journal of the Semiconductor & Display Technology
• /
• v.19 no.4
• /
• pp.11-17
• /
• 2020

In this study, a new method for fabricating flexible transparent electrodes based on silver nanowire-polymer (AgNW-PEDOT:PSS) composite materials having a mesh pattern formed by a solution-based process without lithography was proposed. By optimizing conditions such as the amount of ultraviolet (UV) photosensitizer injected into the suspension of AgNW and PEDOT:PSS, UV exposure time, and deionized (DI) washing time, a clear and uniform mesh pattern was obtained. For the fabricated AgNW-PEDOT:PSS-based mesh-type electrodes, characteristics such as electrical sheet resistance, light transmittance, haze, and bending flexibility were analyzed according to the mixing ratio of AgNW and PEDOT:PSS included in the suspension. The fabricated mesh electrodes typically exhibited a low electrical sheet resistance of less than 20 Ω/sq while maintaining a high transmittance of 80% or more. In addition, it was confirmed from the results of analyzing the effect of PEDOT:PSS on the characteristics of the mesh-type AgNW-PEDOT electrode that the optical visibility was greatly enhanced by reducing the surface roughness and haze, and the bending flexibility was remarkably improved.

• Current Photovoltaic Research
• /
• v.10 no.1
• /
• pp.28-32
• /
• 2022

We investigated the optical and electrical characteristics of ITO/Ag/ITO (IAI) 3-layer thin films prepared by using RF/DC sputtering. To measure the thickness of all thin film samples, we used scanning electron microscopy. As a function of Ag thickness we characterized the optical transmittance and sheet resistance of the IAI samples by using UV-Visible spectroscopy and Hall measurement system, respectively. While the thickness of both ITO thin films in the 3-layered IAI samples were fixed at 50 nm, we varied Ag layer thickness in the range of 0 nm to 11 nm. The optical transmittance and sheet resistance of the 3-layered IAI thin films were found to vary strongly with the thickness of Ag film in the ITO (50 nm)/Ag(t₀)/ITO (50 nm) thin film. For the best transparent conducting oxide (TCO) electrode, we obtained a 3-layered ITO (50 nm)/Ag (t₀ = 8.5 nm)/ITO (50 nm) that showed an avrage optical transmittance, AVT = 90.12% in the visible light region of 380 nm to 780 nm and the sheet resistance, R_□ = 7.24 Ω/□.

• Journal of the Semiconductor & Display Technology
• /
• v.23 no.2
• /
• pp.82-86
• /
• 2024

With the growing field and growing interest in transparent organic light-emitting diodes (TOLED) in the industry, various attempts are being made to improve the transmittance and performance of TOLED. TOLEDs are expected to be used in next-generation displays such as mixture reality (MR) displays, displayable windows, televisions, etc. This study presents a mesh TOLED with better transmittance and luminescence characteristics than existing TOLEDs through an in-situ vacuum deposition method that does not require additional processes such as photolithography and etching. In this study the mesh TOLED's cathode consists of Mg: Ag 1:9 electrode. Mesh patterns are interconnected with a 6 nm layer of interlayer. We approached transmittance improvement up to 30% at 555 nm at the cathode electrode with similar current injection character, also we improved lumination characteristics up to 23% at 7 V driving condition.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2006.11a
• /
• pp.91-92
• /
• 2006

Aluminum-doped zinc oxide (AZO) films are attractive materials as transparent conductive electrode because they are inexpensive, nontoxic and abundant element compared with indium tin oxide (ITO). AZO films have been deposited on glass (corning 1737) substrates by RF magnetron sputtering system. The electrical resistivity of AZO films was $1.81{\times}10^{-2}{\Omega}cm$ and the average transmittance in the visible range 400-800 nm was more than 76% Organic light-emitting diodes (OLEDs) with AZO/TPD/$Alq_3$/Al configuration were fabricated. The current density-voltage properties of devices were studied and compared with ITO devices fabricated under the same conditions.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.20 no.5
• /
• pp.16-22
• /
• 1983

Liquid crystal matrix display is fabricated. ITO transparent electrode and silver paste metal electrode are coated on glad substrate using silk screen printing technique, and SiO is coated on the transparent electrode by evaporation. Liquid crystal molecules are aligled by rubbing technique and displays of Alphanumeric and Hangul are tried using the dynamic scattering effect and the 3: 1 selection method.