• 대한소아치과학회지
• /
• 제25권4호
• /
• pp.731-748
• /
• 1998

The purpose of this study was to test the hypothesis that the more thorough cure of lightactivated composite resin could be obtained if a new way of delivering the light source deep through the resin body is developed when compared to the conventional bulk cure or incremental cure. Using cylindrical resin blocks and natural teeth, various curing conditions were tested for their effects on the degree of microleakage and microhardness. Data were analyzed statistically using One-Way ANOVA and Scheff's Multiple Range test. The results of the present study were as follows: 1. The increment of reduction in microhardness with depth was shown to be higher in group I and II than in group II and V. 2. At the level of lower inner surface and the bottom surface, significantly lower microhardness values were obtained in group I and II when compared to group III, IV and V. Group IV showed the lowest value among three groups(III, IV, V) representing the only statistically significant difference from group V(p<05). 3. Differences between groups in the degree of microleakage detected were shown to be statistically significant (p<05) with the exception of group IV and V at both occlusal and gingival margins. 4. Based upon the above-mentioned results, commonly cited recommendation of incremental curing is strongly supported and the light-transmitting wedge insertion method can be considered as a effective and feasible clinical procedure for the better curing of composite resin. However, more studies under a variety of conditions should be completed before this method is applied actually to the clinical setting.

• 한국정보과학회논문지:컴퓨팅의 실제 및 레터
• /
• 제8권3호
• /
• pp.328-335
• /
• 2002

네트워크 상에서 비디오 스트리밍 데이타를 전송할 때에는 다른 어플리케이션에 비해 훨씬 큰 대역폭을 차지하게 되며, 이에 따라 같은 네트워크를 사용하는 다른 어플리케이션과의 충돌로 과부하가 발생하게 된다. 본 논문에서는 이러한 문제점을 해결하기 위해 RTP와 RTCP를 이용한 스트리밍 데이타 전송 방식을 채택하였다. 즉, RTCP의 RR(Receiver Report) 패킷을 수신하여 네트워크 트래픽 발생 여부를 실시간으로 조사한다. 트래픽 발생 여부에 따라 JMF에서 사용하는 RTP 인코딩 방식 중 하나인 Motion JPEG의 양자화 계수를 동적으로 조절함으로써 전체 네트워크 트래픽을 줄이고자 시도하였다. 전체 전송량 평균과 세션별 전송량 평균 비율이 5% 범위를 넘어설 때, 각 세션별 전송량을 세션 평균값에 가깝게 동적으로 조절한 결과 과부하가 줄어들 뿐만 아니라 전체적인 전송 효율도 개선됨을 확인할 수 있었다.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1991년도 한국자동제어학술회의논문집(국내학술편); KOEX, Seoul; 22-24 Oct. 1991
• /
• pp.361-366
• /
• 1991

A ground and airborne control system for remotely piloted vehicle (RPV) is described. 1) Ground control system 2) airborne control system 3) the method of measuring aircraft attitude and heading 4) autopilot 5) the method of treating emergency status 6) the method of transmitting and receiving communication data 7) the method of displaying aircraft status 8) the characteristics of the aircraft control system are discussed in some detail.

• 한국지진공학회:학술대회논문집
• /
• 한국지진공학회 1998년도 춘계 학술발표회 논문집 Proceedings of EESK Conference-Spring 1998
• /
• pp.163-170
• /
• 1998

The influence of the dam-reservoir interaction on the seismic response of dams is studied. The impounded water is assumed to be inviscid and compressible ideal fluid. Material damping is introduce to simulate the energy loss of wave propagation in the water. The irregular region of the impounded water adjacent to the dam is modeled by boundary element method. The regular region extending to infinity is modeled by the transmitting boundary. The dam body is assumed to behave elastically and modeled by finite element method. The coupled equation of motion is obtained by substructure method.

• Tribology and Lubricants
• /
• 제21권6호
• /
• pp.272-277
• /
• 2005

Continuously variable transmission (CVT) of toroidal type has a elliptical shape of contact zone under the elastohydrodynamic lubrication (EHL) condition, where the power is transmitted only by shearing the lubricant. Due to the small contact area of elliptical shape, the traction of the shear behaviors of lubricant over the contact zone is under extremely high contact pressure over 1.0GPa. During the power transmission by shearing the fluid, many kinds of mechanical movements occur such as squeezing, sliding, rolling and spin. Among the movements, the spin effect that is the most undesirable contact behavior in transmitting the power frequently makes significant abnormal wear damage. In this work, the analysis of elliptical contact of EHL with spin effect is performed, which will give very useful information to understand the traction behaviors in toroidal type of CVT system.

• 한국ITS학회 논문지
• /
• 제8권1호
• /
• pp.76-81
• /
• 2009

ITS용 WSN과 같이 작고 건전지로 동작하는 송신 노드에서는 MCU의 성능이 낮고 메모리의 크기도 충분하지 않으며 소비전력을 줄이는 것이 매우 중요하다. 본 논문에서는 이런 환경에서 TCP/IP 통신을 할 때에 사용되는 TCP헤더 옵션 필드와 추가적인 체크섬 필드를 이용하여, 전송하는 데이터의 크기가 메모리의 크기에 제한을 받지 않고, 데이터 처리 시간과 소비전력을 감소시키는 방식이 제안되고 성능이 분석되었다.

• E2M - 전기 전자와 첨단 소재
• /
• 제8권2호
• /
• pp.211-216
• /
• 1995

In this study, the piezoelectric ceramics/polymer composite transducers with 1-3 connectivity have been studied. A piezoelectric ceramics PZT prepared by Wet-Dry Combination method was used as a filler in polymer matrix Eccogel. We've got the pulse-echo response for 1-3 type piezc-electric composite transducers in water. It was shown that the transmitting and receiving sensitivity of 1-3 type piezoelectric composite transducers could be improved in comparison with that- of solid PZT transducers. The reason is for that 1-3 type Piezoelectric composites have low dielectric constant and density. There was in a good agreement between the resonant frequencies calculated from one period and observed results on the Ultrasonic Transducer Analyzer. According to these results we could be figured out the distance in water by virture of the pulse-echo response.

• 한국항해학회지
• /
• 제16권4호
• /
• pp.35-45
• /
• 1992

In this study, an interface is developed in compliance with the standards which is made by National M.E.A in U.S.A for transmitting the Marine Gyrocompass information. The interface consists of Bearing Signal Transfer, Bearing Signal Demodulator, Bearing Signal Discriminator, Bearing Counter and, Informatioin Tranmitter. The results are as follows : The transmission of bearing information was achieved successfully on the Marine RADAR by the interface tranmitting for the Marine Gyrocompass. And, newly proposed phase-detector in Bearing Signal Discriminator which method is forcibly reset the previous data of D-T Flip Flop can be solved the problems of the delay in phase discrimination and the unstableness in the boundary areas of input signal.

• 한국지진공학회:학술대회논문집
• /
• 한국지진공학회 2003년도 춘계 학술발표회논문집
• /
• pp.232-237
• /
• 2003

A new displacement-based transmitting boundary is developed for the transient analysis of dynamics interactions between flexible dam body and reservoir impounding compressible water The mechanical model is derived analytically in time domain from the kernel function, Bessel function, appearing in the convolution integral and corresponding mechanical model is developed that consists of mass, damping and stiffness matrices. The resulting system of, equations uses displacement degrees of freedom. Hence it can be coupled directly with the displacement-based solid finite element model of dam body, linear of nonlinear. The method was applied to the rigid and flexible dam models. The results showed very good agreement : with the semi-analytic frequency domain solutions.

• 반도체디스플레이기술학회지
• /
• 제17권3호
• /
• pp.108-112
• /
• 2018

In this paper, a respiration measurement method using FMCW signal for off-the-shelf smartphone is presented and investigated. The proposed algorithm transmits FMCW signal periodically instead of transmitting continuously so that one can reduce the power consumption from speaker in smartphone and the algorithm complexity. In order to eliminate the clicking noise generated when transmitting FMCW signal, Tukey window with ${\alpha}=0.01$ is applied to prevent the noise from being heard. An application program for Android OS which can transmit FMCW signal through speaker and record the reflected signals through MIC has been developed. Since the total duration of the signal transmission is set to 20msec per 1 second for the experiments, the power consumption can be decreased by 80% compared to the continuous transmission. It was confirmed that the clicking noise is inaudible as long as a smartphone is located at more than 10cm from ears. In the experiments on a sleeping child, the breathing signal of about 0.27Hz was measured.