• 제목/요약/키워드: Transmitted light

검색결과 295건 처리시간 0.023초

Surface-Plasmon Assisted Transmission Through an Ultrasmall Nanohole of ~ 10 nm with a Bull's Eye Groove

  • Kim, Geon Woo;Ko, Jae-Hyeon;Park, Doo Jae;Choi, Seong Soo;Kim, Hyuntae;Choi, Soo Bong
    • Journal of the Korean Physical Society
    • /
    • 제73권11호
    • /
    • pp.1698-1702
    • /
    • 2018
  • We simulate the light transmission through an extremely small nanoscale aperture having a 10 nm diameter punctured in a metal film positioned at the center of a plasmonic bull's eye grating. A considerable directive emission of transmitted light with a divergence angle of 5.7 degrees was observed at $10{\mu}m$ from the nanohole opening at the frequency of surface plasmon polariton excitation, an confirmed by measuring the distance dependent transmission amplitude. Observations of the electric field in cross-sectional, near-field, and far-field views near-field enhancement associated with the surface plasmon excitation, and the interference of the electric field light through the nanohole in the near-field region is responsible for such a considerable directive emission.

Fabrication of Optical Fiber Gas Sensor with Polyaniline Clad

  • 이윤수;송갑득;주병수;이상문;최낙진;이덕동;허증수
    • 센서학회지
    • /
    • 제13권2호
    • /
    • pp.96-100
    • /
    • 2004
  • Optical fiber sensors have been used to detect small amounts of chemical species. In this work, a new thin polymer-clad fiber sensor is developed. Polyaniline is chemically synthesized and thin clad layers of the polymer are easily deposited on optical fiber by dip-coating technique. The optical property of polyaniline as a sensing material is analyzed by UV-Vis-NIR. The light source is stabilized He-Ne laser at 635 nm wavelength with 1 mW power. The light power transmitted through the optical fiber is measured with a spectrophotometer. By selecting a fixed incident angle, variation of transmitted light intensity through the optical fiber can be detected as gas molecules absorbed in the polyaniline clad layer. Among the various gases, the fabricated optical fiber sensor shows good sensitivity to $NH_{3}$ gas. The optical fiber sensors was shown more improved properties than polymer based sensors which measure conductivity changes.

수중 음파 센서 네트워크 환경에 적합한 경량화된 인증 및 키 발급 프로토콜 (Light Weight Authentication and Key Establishment Protocol for Underwater Acoustic Sensor Networks)

  • 박민하;김역;이옥연
    • 한국통신학회논문지
    • /
    • 제39B권6호
    • /
    • pp.360-369
    • /
    • 2014
  • 수중 음파 센서 네트워크를 이용하여 수중 환경의 자료를 수집하고 이를 이용하여 오염도를 측정하거나 자연재해를 예방하는 등의 연구가 진행되고 있다. 수중에서 수집된 자료는 음파 통신으로 지상의 통신 개체로 전달된다. 수중 환경은 지상 환경에 비해 전송 속도가 낮고, 전송 지연이 빈번히 일어나는 등 통신 성능이 좋지 않기 때문에 지상의 무선 통신에서 사용되는 보안 기술을 그대로 적용시키는 것이 어렵다. 이로 인해 보안 기술을 배제한 체 통신 기술만 사용할 경우 전송되는 자료가 공격자에 의해 탈취되거나 위 변조 되는 등의 보안 위협에 노출될 수 있다. 그렇기 때문에 개체 간의 신뢰성을 입증해 주고, 암호화 통신을 위한 비밀키를 공유하는 인증 및 키 발급 프로토콜 등과 같은 보안 기술이 요구된다. 따라서 본 논문에서는 수중 환경을 위해 경량화한 인증 및 키 발급 프로토콜인 UW-AKE을 제안한다.

빔가르개에서 반사광과 투과광 사이의 위상 관계 고찰 및 간섭계 적용 (A Study of the Phase Relations Between the Reflected and Transmitted Light Waves at a Beam Splitter and Their Application to Interferometers)

  • 손병우;최희주;박주은;차명식
    • 한국광학회지
    • /
    • 제26권2호
    • /
    • pp.103-109
    • /
    • 2015
  • 진폭 분할식 간섭계에서는 입력 빔을 빔가르개(BS)로 분리하고 서로 다른 경로를 거쳐 전파하게 한 다음 두 빔을 중첩시켜 간섭 효과를 일으킨다. 본 논문에서는 손실이 없는 유전체 층들로 이루어진 BS에서 반사와 투과로 분리된 두 광파 사이의 위상관계에 대해 연구하였다. 적절한 기준면에 대해 위상을 정의하면 BS의 층 구조에 관계 없이 투과광과 반사광 사이에는 일정한 위상차가 있다는 것을 알 수 있었다. 이 결과는 일반적인 Stokes 관계식으로 명백히 주어지나, 본 논문에서는 대표적인 대칭적/비대칭적 구조를 가진 두 BS 층에 대해 수치적으로 이를 증명해 보았다. 이 위상 관계로 인해 간섭계에서는 출력광의 중첩 상태(보강 혹은 상쇄 간섭)가 결정되고, 빛 에너지는 보존된다는 당연한 결과를 얻을 수 있었다.

위성-지상간 광통신용 지상단말기의 위성 지향을 위한 PAA 도출 및 제어 알고리즘 (Point Ahead Angle(PAA) Estimation and a Control Algorithm for Satellite-Pointing of the Ground Terminal in Satellite-to-Ground Optical Communication)

  • 윤태현
    • 한국군사과학기술학회지
    • /
    • 제27권3호
    • /
    • pp.329-337
    • /
    • 2024
  • Free-space optical communication technology enables the high-speed data transmission and excellent anti-jamming security. We conduct research on satellite-to-ground free-space optical communication links for high-speed transmission of large-capacity surveillance and reconnaissance data. Since the satellite continues to move along its orbit while the optical signal is transmitted between the satellite and the ground, the pointing angle of the beam from the ground terminal needs to be corrected by Point Ahead Angle(PAA) so that the transmitted light reaches the expected location of the satellite. In this paper, we present the algorithm for PAA estimation and control.

가변적인 RGB Interleaving을 활용한 LED 기반의 가시광 통신에서 효율적인 데이터 전송 기법 (Efficient Data Transmission in LED-based Visible Light Communication Using Variable RGB Interleaving scheme)

  • 서효덕;이규진
    • 융합정보논문지
    • /
    • 제7권6호
    • /
    • pp.167-172
    • /
    • 2017
  • 본 논문에서는 LED 기반의 가시광 통신 시스템에서 효율적인 데이터 전송을 하기 위해 가변적인 RGB 인터리빙 기법을 제안하였다. 빛을 데이터 전송의 자원으로 활용하는 가시광 통신 시스템은 빛의 성질과 빛의 3원색의 영향을 받게 된다. 그러나 빛의 반사, 회절 그리고 중첩과 같은 빛의 성질은 전송하고자 하는 데이터의 간섭을 발생시켜 데이터의 Burst error를 발생시키게 된다. 이러한 문제점은 가시광 통신 시스템의 BER 성능을 열하 시킨다. 이러한 문제점을 해결하기 위해서, 본 논문은 가변적인 RGB 인터리빙 기법을 활용하고자 한다. 가변적인 RGB 인터리빙을 통하여, 데이터의 Burst error를 줄일 수 있으며, 가시광 통신 시스템의 채널 간 간섭을 줄일 수 있다. 또한, 데이터의 중요도나 사용자의 요구사항에 따라 달라지는 QoS를 만족하기 위해 제안 시스템을 적용하면 사용자가 요구하는 QoS를 제공할 수 있으며 효율적인 데이터 전송을 할 수 있게 한다.

투과 광을 이용한 치아 균열 진단기 개발 (Development of Diagnostic Device for the Tooth Crack Using Transmitted Light)

  • 양정수;서효기;이준석;최금연;조진형
    • 한국전기전자재료학회논문지
    • /
    • 제29권5호
    • /
    • pp.317-320
    • /
    • 2016
  • In order to acquire clear images capable of diagnosing cracked tooth by light transmission, the optical properties of LED light source were examined. Based on the results, the prototype which basically consisted of LED light source, bandpass filter and commercial compact camera module was designed and manufactured. The wavelength and optical power of the LED in the prototype were 850 nm and 7 mW/Sr, respectively. In evaluation of the prototype using microscope, the observation of the crack with width of above $17{\mu}m$ was possible. In addition, image analysis to obtain shape information on the observed tooth cracks was carried out.

스테인드글라스 렌더링을 위한 조명 모델 (An Illumination Model for Stained Glass Rendering)

  • 김정아;명세화;김동호
    • 한국컴퓨터그래픽스학회논문지
    • /
    • 제13권1호
    • /
    • pp.7-14
    • /
    • 2007
  • 본 연구에서는 스테인드글라스 렌더링을 위한 조명 모델을 제안한다. 본 기법은 스테인드글라스에서 중요시되는 광학적 요소를 렌더링 알고리즘에 반영하여 보다 사실적인 스테인드글라스 결과 영상을 만들어낸다. 이를 위해 3단계의 작업을 수행하게 되는데 먼저 스테인드글라스의 표면과 빛의 방향에 의해서 영향을 받게 되는 확산광과 빛과 시선의 각도에 따라 달라지는 하이라이트를 계산한다. 그 다음으로 프레넬 항을 이용하여 스테인드글라스에 투과된 빛의 양을 계산한다. 그 후, 각 유리조각의 색상에 따른 빛의 흡수를 표현하여 사실적인 스테인드글라스 영상을 만든다.

  • PDF

Study of Modulation Effect in Integrated Interface Under Controlling Switching Light-Emitting Diode Lighting Module

  • Hong, Geun-Bin;Jang, Tae-Su;Kim, Yong-Kab
    • Transactions on Electrical and Electronic Materials
    • /
    • 제12권6호
    • /
    • pp.253-257
    • /
    • 2011
  • This study was carried out to solve problems such as radio frequency band depletion, confusion risk, and security loss in existing visible wireless communication systems, and to determine the applicability of next-generation networks. A light-emitting diode (LED) light communication system was implemented with a controlling switching light module using the ATmega16 micro-controller. To solve the existing modulation effect and disturbance in visible light communication, an integrated interface was evaluated with a driving light module and analyzes its reception property. A transmitter/receiver using the ATmel's micro-controller, high-intensity white LED-6 modules, and infrared sensor KSM60WLM and visible sensor TSL250RD were designed. An experiment from the initial value of distance to 2.5 m showed 0.46 V of the voltage loss, and if in long distance, external light interference occurred and light intensity was lost by external impact and thus data had to be modified or reset repeatedly. Additionally, when we used 6 modules through the remote controller's lighting dimming, data could be transmitted up to 1.76 m without any errors during the day and up to 2.29 m at night with around 2~3% communication error. If a special optical filter can reduce as much external light as possible in the integrated interface, the LED for lighting communication systems may be applied in next generation networks.

LiDAR 신호처리 플랫폼을 위한 프레임 간 마스킹 기법 기반 유효 데이터 전송량 경량화 기법 (Semantic Depth Data Transmission Reduction Techniques using Frame-to-Frame Masking Method for Light-weighted LiDAR Signal Processing Platform)

  • 정태원;박대진
    • 한국정보통신학회논문지
    • /
    • 제25권12호
    • /
    • pp.1859-1867
    • /
    • 2021
  • 자율주행차량을 위해 다수의 LiDAR 센서가 차량에 탑재되고 있으며, 다수의 LiDAR 센서가 탑재됨에 따라 이를 전처리해줄 시스템이 요구되었다. 이러한 전처리 시스템을 거쳐 메인 프로세서에 센서의 데이터를 전달하거나 이를 처리할 경우 막대한 데이터양에 의해 전송 네트워크에 부하를 야기하고 이를 처리하는 메인 프로세서에도 상당한 부하를 야기하게 된다. 이러한 부하를 최소화하고자 LiDAR 센서의 데이터 중 프레임 간 데이터 비교를 통해 의미 있는 데이터만을 전송하고자 한다. 움직이는 객체가 없는 정적인 실험 환경과 센서의 시야각 내에서 사람이 움직이는 동적 실험환경에서 최대 4대의 LiDAR 센서의 데이터를 처리하였을 때, 정적 실험 환경일 경우 232,104 bytes에서 26,110 bytes로 약 89.5% 데이터 전송량을 줄일 수 있었으며, 동적 실험 환경일 경우 29,179 bytes로 약 88.1%의 데이터 전송량을 감축할 수 있었다.