• Journal of the Korean Physical Society
• /
• v.73 no.11
• /
• pp.1698-1702
• /
• 2018

We simulate the light transmission through an extremely small nanoscale aperture having a 10 nm diameter punctured in a metal film positioned at the center of a plasmonic bull's eye grating. A considerable directive emission of transmitted light with a divergence angle of 5.7 degrees was observed at $10{\mu}m$ from the nanohole opening at the frequency of surface plasmon polariton excitation, an confirmed by measuring the distance dependent transmission amplitude. Observations of the electric field in cross-sectional, near-field, and far-field views near-field enhancement associated with the surface plasmon excitation, and the interference of the electric field light through the nanohole in the near-field region is responsible for such a considerable directive emission.

• Journal of Sensor Science and Technology
• /
• v.13 no.2
• /
• pp.96-100
• /
• 2004

Optical fiber sensors have been used to detect small amounts of chemical species. In this work, a new thin polymer-clad fiber sensor is developed. Polyaniline is chemically synthesized and thin clad layers of the polymer are easily deposited on optical fiber by dip-coating technique. The optical property of polyaniline as a sensing material is analyzed by UV-Vis-NIR. The light source is stabilized He-Ne laser at 635 nm wavelength with 1 mW power. The light power transmitted through the optical fiber is measured with a spectrophotometer. By selecting a fixed incident angle, variation of transmitted light intensity through the optical fiber can be detected as gas molecules absorbed in the polyaniline clad layer. Among the various gases, the fabricated optical fiber sensor shows good sensitivity to $NH_{3}$ gas. The optical fiber sensors was shown more improved properties than polymer based sensors which measure conductivity changes.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.39B no.6
• /
• pp.360-369
• /
• 2014

Underwater Acoustic Sensor Networks(UASN) enables varied study from collected data of underwater environments such as pollution monitoring, disaster prevention. The collected data is transmitted from underwater to terrestrial communication entity by acoustic communication. Because of the constraints of underwater environments include low data rate and propagation delay, it is difficult to apply cryptographic techniques of terrestrial wireless communication to UASN. For this reason, if the cryptographic techniques are excluded, then collected data will be exposed to security threats, such as extortion and forgery, during transmission of data. So, the cryptographic techniques, such as the authentication and key establishment protocol which can confirm reliability of communication entities and help them share secret key for encryption of data, must need for protecting transmitted data against security threats. Thus, in this paper, we propose the light weight authentication and key establishment protocol.

• Korean Journal of Optics and Photonics
• /
• v.26 no.2
• /
• pp.103-109
• /
• 2015

In an amplitude-splitting interferometer, a beam splitter divides an input beam into two parts, which are superposed after propagating along separate paths, producing an interference effect. We have investigated the phase relation between the reflected and transmitted light waves at BS's made of lossless dielectric stacks. If we define the phases with proper reference planes, a definite phase relation exists, irrespective of the detailed structure of the layers in the BS. Although this results from the generalized Stokes relations, we have verified it numerically for two representative BS's with symmetric and asymmetric layer structures respectively. When we applied the phase relation to interferometers, we could determine the superposition state of the output beam (either constructive or destructive interference) for a general BS, and could verify that the light's energy was conserved.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.27 no.3
• /
• pp.329-337
• /
• 2024

Free-space optical communication technology enables the high-speed data transmission and excellent anti-jamming security. We conduct research on satellite-to-ground free-space optical communication links for high-speed transmission of large-capacity surveillance and reconnaissance data. Since the satellite continues to move along its orbit while the optical signal is transmitted between the satellite and the ground, the pointing angle of the beam from the ground terminal needs to be corrected by Point Ahead Angle(PAA) so that the transmitted light reaches the expected location of the satellite. In this paper, we present the algorithm for PAA estimation and control.

• Journal of Convergence for Information Technology
• /
• v.7 no.6
• /
• pp.167-172
• /
• 2017

In this paper, we propose a variable RGB interleaving technique for efficient data transmission in LED based visible light communication system. Visible light communication systems that utilize light as a resource for data transmission are affected by the nature of light and the three primary colors of light. However, the nature of light, such as light reflection, diffraction, and superposition, causes interference of the data to be transmitted, causing burst errors in the data. Such a problem causes the BER performance of the visible light communication system to degrade. To solve these problems, this paper attempts to utilize the variable RGB interleaving technique. Through variable RGB interleaving, data burst errors can be reduced and inter channel interference in a visible light communication system can be reduced. In addition, if the proposed system is applied to meet the QoS that depends on the importance of data or the requirements of the user, it can provide QoS requested by the user and enable efficient data transmission.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.29 no.5
• /
• pp.317-320
• /
• 2016

In order to acquire clear images capable of diagnosing cracked tooth by light transmission, the optical properties of LED light source were examined. Based on the results, the prototype which basically consisted of LED light source, bandpass filter and commercial compact camera module was designed and manufactured. The wavelength and optical power of the LED in the prototype were 850 nm and 7 mW/Sr, respectively. In evaluation of the prototype using microscope, the observation of the crack with width of above $17{\mu}m$ was possible. In addition, image analysis to obtain shape information on the observed tooth cracks was carried out.

• Journal of the Korea Computer Graphics Society
• /
• v.13 no.1
• /
• pp.7-14
• /
• 2007

In this paper we present an illumination model for rendering realistic stained glass. This techniques simulates the phenomenon of stained glass in real world by applying important optical component of the stained glass to the rendering algorithm. The optics for stained glass involves three basic physical mechanisms. First, diffuse light and highlight contribute to the brightness of stained glass which is typically white and changes along with the light source and the view position. Next, Fresnel refraction dominates the amount of refracted (transmitted) light. Finally, we express volume absorption occurs in all stained glass. Then, the rendered stained glass images achieve excellent realism.

• Transactions on Electrical and Electronic Materials
• /
• v.12 no.6
• /
• pp.253-257
• /
• 2011

This study was carried out to solve problems such as radio frequency band depletion, confusion risk, and security loss in existing visible wireless communication systems, and to determine the applicability of next-generation networks. A light-emitting diode (LED) light communication system was implemented with a controlling switching light module using the ATmega16 micro-controller. To solve the existing modulation effect and disturbance in visible light communication, an integrated interface was evaluated with a driving light module and analyzes its reception property. A transmitter/receiver using the ATmel's micro-controller, high-intensity white LED-6 modules, and infrared sensor KSM60WLM and visible sensor TSL250RD were designed. An experiment from the initial value of distance to 2.5 m showed 0.46 V of the voltage loss, and if in long distance, external light interference occurred and light intensity was lost by external impact and thus data had to be modified or reset repeatedly. Additionally, when we used 6 modules through the remote controller's lighting dimming, data could be transmitted up to 1.76 m without any errors during the day and up to 2.29 m at night with around 2~3% communication error. If a special optical filter can reduce as much external light as possible in the integrated interface, the LED for lighting communication systems may be applied in next generation networks.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.25 no.12
• /
• pp.1859-1867
• /
• 2021

Multi LiDAR sensors are being mounted on autonomous vehicles, and a system to multi LiDAR sensors data is required. When sensors data is transmitted or processed to the main processor, a huge amount of data causes a load on the transport network or data processing. In order to minimize the number of load overhead into LiDAR sensor processors, only semantic data is transmitted through data comparison between frames in LiDAR data. When data from 4 LiDAR sensors are processed in a static environment without moving objects and a dynamic environment in which a person moves within sensor's field of view, in a static experiment environment, the transmitted data reduced by 89.5% from 232,104 to 26,110 bytes. In dynamic environment, it was possible to reduce the transmitted data by 88.1% to 29,179 bytes.