• Bulletin of the Korean Chemical Society
• /
• v.31 no.8
• /
• pp.2185-2189
• /
• 2010

Closely arranged CdSe and Zn doped CdSe vertical nanorod bundles were grown directly on FTO coated glass by using electrodeposition method. Structural analysis by XRD showed the hexagonal phase without any precipitates related to Zn. FE-SEM image showed end capped vertically aligned nanorods arranged closely. From the UV-vis transmittance spectra, band gap energy was found to vary between 1.94 and 1.98 eV due to the incorporation of Zn. Solar cell parameters were obtained by assembling photoelectrochemical cells using CdSe and CdSe:Zn photoanodes, Pt cathode and polysulfide (1M $Na_2S$ + 1M S + 1M NaOH) electrolyte. The efficiency was found to increase from 0.16 to 0.22 upon Zn doping. Electrochemical impedance spectra (EIS) indicate that the charge-transfer resistance on the FTO/CdSe/polysulfide interface was greater than on FTO/CdSe:Zn/polysulfide. Cyclic voltammetry results also indicate that the FTO/CdSe:Zn/polysulfide showed higher activity towards polysulfide redox reaction than that of FTO/CdSe/polysulfide.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2010.08a
• /
• pp.52-52
• /
• 2010

본 연구에서 우리는 HPHT 처리 전 FT-IR spectrometer를 이용한 사전분석을 통해 type Ia brown 다이아몬드를 IaA, IaB, IaAB (A>B), IaAB (A=B), IaAB (A$1700-1800^{\circ}C$, 5 GPa에서 다이아몬드가 흑연화 되지 않는 범위 하에 HPHT처리를 시행하였다. 자외선-가시광선 분광분석기(UV-Vis Spectrometer, Shimadzu UV 3101PC)를 사용하여 350~800 nm에서의 가시광선 범위를 0.1nm의 분해능으로 투과(Transmittance) 모드로 측정하였고, 퓨리에 변환 적외선 분광분석기(FT-IR spectrometer, Jasco-4100)을 사용하여 $400{\sim}6000cm^{-1}$의 범위에서 $4cm^{-1}$ 의 분해능으로 흡수(Absorption) 모드로 측정한 후 HPHT 처리 전후를 비교 분석하였다. 또한 광루미네선스(Photoluminescence) 분석은 325 nm He-Cd laser를 광원으로 한(PL, Spectra-pro 2150i, Spectra-pro 2300i micro-spectrometer) 및 532 nm green laser를 광원으로 한(PL, SAS 2000)를 사용하여 각각 350~600 nm, 550~1100 nm의 범위에서 0.1nm step으로 측정하여 HPHT 처리전과 후를 비교 분석하였다. HPHT처리 후 모든 시료는 N3 center (415.4 nm), H4 center (496.4nm) 및 platelet와 연관된 ($1363\;cm^{-1}$)의 peak가 감소하였고, H3 center (503.2 nm)와 G-band가 증가하는 경향을 나타내었다. 또한 HPHT 처리 시 질소의 B집합보다 A집합이 더 감소하는 경향을 나타내었으며, A 또는 B집합의 파괴에서 발생된 질소 원자에 의해 질소의 interstitial center (594 nm)가 증가함을 알 수 있었다. HPHT 처리 후 모든 시료는 (N-V)- center가 생성됨을 확인 할 수 있었다. 결론적으로 본 연구를 통해 HPHT 처리를 통해 다이아몬드 내에 존재하는 질소결합관련 상태의 변화를 확인할 수 있었다.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2014.02a
• /
• pp.193.1-193.1
• /
• 2014

This study was to investigate the electronic structure and optical properties of Na doped into NiO thin film using XPS and REELS. The films were grown by electron beam evaporation with varying the annealing temperature. The relationship between the electrical characteristics with the local structure of NiO thin films was also discussed. The x-ray photoelectron results showed that the Ni 2p spectra for all films consist of Ni 2p3/2 which indicate the presence of Ni-O bond from NiO phase and for the annealed film at temperature above $200^{\circ}C$ shows the coexist Ni oxide and Ni metal phase. The reflection electron energy loss spectroscopy spectra showed that the band gaps of the NiO thin films were slightly decreased with Na-doped into films. The Na-doped NiO showed relatively low resistivity compared to the undoped NiO thin films. In addition, the Na-doped NiO thin films deposited at room temperature showed the best properties, such as a p-type semiconducting with low electrical resistivity of $11.57{\Omega}.cm$ and high optical transmittance of ~80% in the visible light region. These results indicate that the Na doping followed by annealing process plays a crucial in enhancing the electrical and optical properties of NiO thin films. We believe that our results can be a good guide for those growing NiO thin films with the purpose of device applications, which require deposited at room temperature.

• Journal of Korean Ophthalmic Optics Society
• /
• v.7 no.1
• /
• pp.29-34
• /
• 2002

Because do dilution (5%) in Venzotriazol distilled water and is kept UV interception departure woe which make to time each 1, 2, 5, 15, 20, 30 minutes by dip method, produced sample ore of UV interception lens. Spectrum of transmittance for each sample are measured in 320~450nm sacred grounds. The result optical absorption edge is each 403, 408, 414, 419nm regions, and absorption edge appeared in each band of 3.07, 3.04, 2.99, 2.96 eV. UV-cut lens departure solution make 2-Hydroxy-4-n-octoxyhenzophenones of 5%, 10% because solvent methanol and UV-cut lens made by Spray pyrolysis method. Transmission edge of each lens that do spray to same warelength showed sameinwavelength spectra. Being storehouse absorption edgethat increase 385, 398 and 417nm region of when do spray for 2, 4 and 6 minutes, band is accomplishing each 3.22, 3.11, 2.97 eV.

• Korean Journal of Optics and Photonics
• /
• v.32 no.3
• /
• pp.126-132
• /
• 2021

In this research, we have investigated the sensitivity of an extraordinary optical transmission sensor depending on the angle of incident light. Three types of light, including a collimated beam and focused beams (4× and 10×), were designed for the sensor system. To compare the sensitivity of the sensor, we measured transmittance spectra using deionized water (n=1.333) and refractive-index-matching oils (n=1.360 and 1.380). Those spectra were analyzed in terms of redshifting of the peak, so that we could determine the sensitivity. The sensitivity tended to increase when the collimated beam is used on the system, and we have concluded that the sensitivity could be affected by the incidence angle on an extraordinary optical transmission sensor.

• Journal of Korean Ophthalmic Optics Society
• /
• v.7 no.1
• /
• pp.57-61
• /
• 2002

Ternary $SrO-B_2O_3-SiO_2$ glasses were fabricated as a function of R(${\equiv}SrO\;mole%/B_2O_3\;mole%$) and K(${\equiv}SiO_2\;mole%/B_2O_3\;mole%$). The structures of these glasses were investigated through Infrared transmittance, vicker's hardness, and refractive index. The results indicated : First, in the infrared transmittance spectra, when R increased, the intensities of the absorption bands around $1200{\sim}1600cm^{-1}$ resulting from the B-O stretching vibration bond in the symmetrical trigonal $BO_3$ units decreased, and these of the absorption bands around $800{\sim}1200cm^{-1}$ caused by the B-O stretching vibration bond of the tetrahedral $BO_4$ units varied. Also, the intensities of the absorption bands for the B-O stretching vibration bond in trigonal $BO_3$ units increased and these of the bands for B-O stretching vibration bond in tetrahedral $BO_4$ units decreased as K increased. Second, the increase and the decrease of vicker's hardness values for these glasses depended on the fraction of $BO_4$ units and it of $BO_3$ units, respectively. The refractive index of these glasses mostly depended on the SrO contents and only slightly depended on the fraction of $BO_4$ and $BO_3{^-}$ units.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2004.08a
• /
• pp.41-43
• /
• 2004

Plasma polymerized para-xylene ($PP_PX$) deposited by plasma-enhanced chemical vapor deposition (PECVD) was used as the barrier layer on the polyethylene terephthalate (PET) substrate to improve lifetime of the flexible organic light-emitting diodes (FOLEDs). The $PP_PX$ barrier layer deposited on top of the PET substrate with plasma power of 30 W at deposition pressure of 0.2 torr showed transmittance spectra good enough to be applied in FOLED on PET substrates. FOLEDs with the $PP_PX$ barrier layer (barrier-FOLEDs) showed similar I-V and B-V characteristics to FOLEDs without the $PP_PX$ layer (control-FOLEDs). The lifetime of barrier-FOLED was two times longer than that of the control-FOLED. With $PP_PX$ passivation layers, lifetimes of both control and barrier-FOLEDs were improved by more than 4 times. These results show that PECVD deposited $PP_PX$ layers can be used as barrier layers for FOLEDs on plastic substrates as well as passivation layers for general OLEDs.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2009.06a
• /
• pp.457-458
• /
• 2009

In this work, transparent conducting Al-doped zinc oxide (AZO) films were prepared on Coming glass substrate by RF magnetron sputtering using an Al-doped ZnO target (Al: 2 wt.%) at room temperature and all films were deposited with athickness of 150 nm. We investigated the effects of the post-annealing temperature and the annealing ambient on structural, electrical and optical properties of AZO films. The films were annealed at temperatures ranging from 300 to $500^{\circ}C$ in steps of $100^{\circ}C$ using rapid thermal annealing equipment in oxygen. The thickness of the film was observed by field emission scanning electron microscopy (FE-SEM) and grain size was calculated from the XRD spectra using the Scherrer equation and their electrical properties were investigated using a hole measurement and the reflectance of AZO films was investigated by UV-VIS spectrometry.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.7 no.4
• /
• pp.712-718
• /
• 2003

The effects of nitrogen ion implantation on vacuum evaporated cadmium sulphide (CdS) thin films were investigated by X-ray diffraction, optical transmittance spectra, and Raman scattering studies. The as-deposited CdS films have a hexagonal structure with preferential (0 0 2) orientation. Formation of Cd metallic clusters was observed in ion implanted films from the XRD patterns. The band gap of N+ implanted films decreased, whereas the optical absorption coefficient values increased with the increase of implantation dose. The Raman peak position appeared at 299 cm-1 and the FWHM increased with the ion dose. A decrease in the area of Raman peak of CdS Al(LO) mode is seen on implantation.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.26 no.4
• /
• pp.264-270
• /
• 2013

$CaMoO_4:Tb^{3+}$ green phosphor powders and thin films were successfully prepared by using the solid-state reaction method and the radio-frequency magnetron sputtering technique, respectively. The crystalline structure of all phosphor powders with different $Tb^{3+}$ ion concentrations was found to be a tetragonal system with the maximum diffraction intensity at $28.58^{\circ}$, while that of the phosphor thin films, irrespective of the type of substrate, was amorphous. As for the phosphor powders, the grain particles showed the chain-like patterns with inhomogeneous size distribution, the excitation spectra were composed of a broad band peaked at 307 nm and two small narrow bands centered at 381 and 492 nm, and the highest green emission spectrum was observed at 0.01 mol of $Tb^{3+}$ ions. As for the phosphor thin films, the average transmittance exceeding 85% was measured in the 400~1,100 nm range and the optical band gap showed a significant dependence on the type of substrate.