• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.12 no.6
• /
• pp.241-249
• /
• 2012

In the many countries, research about ultra wideband wireless transmission technique is widely studied for efficient utilization of frequency resource due to a sudden increase of demand of frequency resource all over the world. The ultra wideband communication system has the some specific advantages. First, it can transmit data with high speed, second short transmission range can increase the frequency reuse rate, and finally it has high security property. However, there is a interference between ultra wideband system and other communication system but study to solve this problem is insufficient. To efficient utilization of limited frequency resource, a novel frequency avoidance technique and setup the standardization of frequency interference must need. So, the purpose of this paper is that increases communication efficiency of microwave communication systems to analyze the technical trends for transmission of the low power device, and to research the implementation and technical research of wireless access network technique of wideband communication systems.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.11 no.6
• /
• pp.295-302
• /
• 2011

In this paper we consider technological requirements to broadcast digital television signals using single frequency networks(SFN) in the Advanced Television Systems Committee(ATSC) transmission systems and propose Interference Cancellation Digital On Channel Regenerative Repeater(IC-DOCR) thar overcomes the limitation of EDOCR(Equalization Digital On Channel Repeater) proposed by ETRI. The proposed IC-DOCR maintains the benefits of EDOCR that have good output signal quality removing multi-path, additive white Gaussian noise(AWGN). In additional, since the Interference Cancellation algorithm using the 8-VSB symbol demodulation of received signal removes the Interference of feedback signal, IC-DOCR improve the weakness of EDOCR that have low isolation between receive and transmit antenna so that can overcome the limitation of output signal power. we did analysis and verification of the proposed system performance using computational simulation.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.43 no.3 s.345
• /
• pp.27-31
• /
• 2006

Millimeter over Fiber (MMoF) technique modulates millimeter wave signal optically to transmit it through an optical fiber for long distances with small loss. MMoF system usually uses optical single sideband (OSSB) modulation scheme to reduce fiber chromatic dispersion and obtain high bandwidth efficiency. The optical link of MMoF system using OSSB is treated as a nonlinear amplifier, and the AM/AM characteristic function of the amplifier is a Bessel function of the first kind of order 1. In this paper, we investigate the performance of OFDM MMoF system considering nonlinearity of OSSB modulation. We estimate a power of the nonlinear distortion noise to analyze the theoretical bit error rate(BER), and perform a simulation to verify the theoretical BER.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.44 no.10
• /
• pp.20-28
• /
• 2007

Zigbee sensor network base on IEEE802.15.4 has local address of 2 byte on transmit packet data which is pick up the address for each sensor node. Sensor network is requested low power, low cost, many nodes at hues physical area. There for Zigbee is very good solution supporting for next Ubiquitous generation but the Zigbee sensor network has address allocation problem of each sensor node. Is established standard from Zigbee Alliance, to the address allocation method uses Cskip algorithm. The Cskip algorithm use the hazard which allocates an address must blow Hop of the maximum modification and child node number. There is to address allocation and from theoretically it will be able to compose a personal 65536 sensor nodes only actual with concept or space, only 500 degree will be able to compose expansion or the low Zigbee network. We proposed an address allocation method using coordinate value for Zigbee sensor network.

• Korean Journal of Optics and Photonics
• /
• v.23 no.5
• /
• pp.217-221
• /
• 2012

In this paper, we have fabricated by means of the "Micro-Block Stacking (MBS)" method the 8 pin mini DIL integrated Triplexer, which can transmit CATV and voice/data at the same time in a single fiber. Our MBS technique is a novel scheme of compact optical module packaging which secures precision positioning of the components on the optical beam path by prefixed stacks of ceramic blocks. The subassembly in which a laser diode, two receiver photodiodes, two WDM filters, and four micro lenses are integrated is only $5.40mm{\times}2.15mm{\times}1.05mm$ in size. As the Triplexer is aligned to the single mode fiber, the transmitter power of -14.5 dBm and the receiver sensitivities of 0.83 A/W, 0.73 A/W for 1550 nm, 1490 nm, respectively are obtained.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.26 no.7
• /
• pp.627-635
• /
• 2015

We propose a dual-layer differential equal-gain codebook design methodology for LTE-Advanced(LTE-A), IEEE802.ac, and radar system having multiple transmit and receive antennas, and make computer simulations to evaluate its link-level performaces. M-ary phase shift keying constellation is used as its codeword elements to utilize low-cost power amplifiers at mobile stations. Especially, the proposed codebook can meet radar systems requirement for the high-powered equal-gain transmission property. Due to the temporal correlation of the adjacent channel, the proposed differential codebook can quantize only the differential information of the channel instead of the whole channel subspace, which virtually increase the codebook size to realize more accurate quantization of the channel. The proposed codebook has the same properties of LTE codebook that is, constant modulus, complexity reduction, and nested property. Computer simulations show that the proposed codebook performs better than the conventional 8-ary codebooks with the same amount of feedback information.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.22 no.5
• /
• pp.545-551
• /
• 2011

In this paper, we described a measurement method of an EIRP(Effective Isotropic Radiated Power) of a WCDMA base station using a pilot channel in line-of-sight environments. Especially we measured it in real base station environments in order to apply this method to domestic base station inspection test. Estimated EIRP results from measured value is -2 dB lower than theoretical values, which is calculated by the data of transmit antenna. The deviation of -2 dB is verified as a polarization mismatch between the base station antenna and a receiver antenna, and it can be calibrated. Therefore, we verified that our measurement method could be an effective tool to measure an EIRP in WCDMA base station inspection test.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.13 no.6
• /
• pp.1083-1090
• /
• 2009

In 18GHz using unified data transmission in a subway and railway, Influence of the multipath fading is big and an arrival range of the micro wave takes the influence greatly according to the transmit angle and receive angle because it not diffracted. This thesis analyzed microwave property underground tunnel and ground railway at unified data transmission in subway and railway. Antenna gain of directional antenna many used unified transmission in an subway and railway, is used 15dBi and 10dBi in simulation. Transmitter's property is compared underground tunnel to ground railway about curved railway of R=100, R=200, R=400. Specification of transmitter is used sample unified transmission system in subway and railway of KRRI(korea railroad research Institute). Transmitter's power is 20dBm and Reciever's sensitivity is -90dBm. According to result of simulation.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2012.10a
• /
• pp.13-14
• /
• 2012

Than fluorescent lamps or light bulbs, long life, small power consumption and to the development of modern technology, LED (Light Emitting Diode) devices have the advantage of easy control. For these reasons, using the LED device, lighting has been widely used. LED using optical fiber technology using LED lighting technology with the development of wireless communication technology is attracting attention again. Using LED lights this study analyzed the performance of the technology transfer and implementation of the information transmission system of the visible light communication using LED lighting of the White Visible Light Communication (VLC) based PC module transmitter and receiver modules. Has made a system that can transmit information more than the value of the initial distance ~ 50cm, depending on the presence or absence of the lens, in order to increase the efficiency of the LED modules with different efficiencies that could confirm the performance of the implementation of the research, analysis, and application methods. and about the possibility that you want to check.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2007.10a
• /
• pp.518-521
• /
• 2007

The functional wireless sensor node for u-healthcare application was developed. The developed sensor node can check the abnormality of ECG in some simple software in ROM of microprocess in the sensor node. The ECG signal is one of very important health signal form human body, and wavelike signal which is sampled as a sampling frequency between 100 and 400 Hz for digitalization, so the wireless data dor ECG signal is some heavy in Zigbee communication. Thus the sensor send the ECG signal to other sensor nodes or base station when it find abnormality in ECG signal is key technology to reduce the traffic between sensor nodes in wireless sensor network for u-healthcare, The sensor node does not need to transmit ECG data all time in wireless sensor network and to server. Using these sensor nodes, the healthcare system can dramatically reduce wireless data packet overload, the power consumption of battery in the sensor nodes and thus increase the reliability of the wireless system.