• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.40 no.6
• /
• pp.1058-1069
• /
• 2015

In wireless sensor networks, geographic routing is known as an efficient method to transmit the data packet using the location information. Geographic routing relies on two techniques: greedy forwarding and face routing. Face routing helps to recover from greedy routing fail and is based on the planar graph in which does not cross each edge. However, the planarization causes frequently short transmission of data packet because it removes other edges except the shortest one. In other words, since the planarization removes the long edges, face routing could not exploit the efficient removed edges of communication graph. This problem brings about the excessive energy consumption of nodes. In this paper, we propose an energy efficient face routing protocol in wireless sensor networks. This proposed protocol searches the removed edges and transmits them via the edges. Simulation shows that the proposed protocol is more efficient in terms of energy consumption than the previous face routing.

• Journal of the Korea Society for Simulation
• /
• v.16 no.2
• /
• pp.55-64
• /
• 2007

The sensor nodes on the sensor network transmit the reply for the queries of ADV(Advertisement) message from sink node, and the sink node presents the received information to users. To find the relevant sensor nodes, routing algorithms disseminates ADV messages to the whole network. Thus not only the relevant sensor nodes but also the irrelevant ones consume considerable amount of energy. To alleviate such kind of energy consumption, this thesis proposes a new routing algorithm and coins it Directed Messaging. It propagates ADV message only to the limited direction and changes the direction until the requested sensor node is found. In this way, Directed Messaging reduces unnecessary energy consumption and enhance the efficiency of the networks. Performance of the Directed Messaging algorithm is evaluated through simulation and compared with Directed Diffusion algorithm. Simulation results show that it has better performance than Directed Diffusion.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.37 no.3B
• /
• pp.149-157
• /
• 2012

In WSN environment, the sensor nodes collect sensed data, and transmit data to the BS. BS is difficult to trust the data from unauthenticated nodes. Therefore, many papers have been proposed about the node authentication and the safety of data. In the AM-E paper, data is delivered after node authentication. In this time, the sensor nodes are directly communicated to BS the AREQ/AREP message for authentication. Therefore, the sensor nodes consume more energy for authentication. Also, noes communicate directly with the BS for authentication will have problem due to the limited energy of nodes. In this paper, the same security with AM-E is supported, Furthermore, to minimize the energy consumption, IDE based hierarchical node authentication protocol is proposed. Compared with AM-E, the number of alive nodes is increased about 39%. Thus, the entire network life time is extended and energy efficiency is improved.

• The Journal of the Korea Contents Association
• /
• v.10 no.12
• /
• pp.101-108
• /
• 2010

Many works on energy-efficient cluster event detection schemes have been done considering the energy restriction of sensor networks. The existing cluster event detection schemes transmit only the boundary information of detected cluster event nodes to the base station. However, If the range of the cluster event is widened and the distribution density of sensor nodes is high, the existing cluster event detection schemes need high transmission costs due to the increase of sensor nodes located in the event boundary. In this paper, we propose an energy-efficient cluster event detection scheme using the minimum boundary polygons (MBP) that can compress and summarize the information of event boundary nodes. The proposed scheme represents the boundary information of cluster events using the MBP creation technique in the large scale of sensor network environments. In order to show the superiority of the proposed scheme, we compare it with the existing scheme through the performance evaluation. Simulation results show that our scheme maintains about 92% accuracy and decreases about 80% in energy consumption to detect the cluster event over the existing schemes on average.

• Journal of Internet Computing and Services
• /
• v.4 no.4
• /
• pp.15-25
• /
• 2003

Wireless ad-hoc networks are only composed with mobile devices. Unlike the traditional wired networks, those devices are mostly operated with battery power. Since the battery-operated power is limited, the efficient energy resource managements becomes an important issue in wireless ad-hoc networks and various studies that considered these characteristics are progressed. One of those studies is an energy efficient routing using coordinators. In this method. only devices elected as coordinator participate in data transmissions in ad-hoc networks, while other devices remain in sleep node. The overall energy consumption of a system can be reduced. In order to minimize energy consumption of a total network, previous results try to maximize the number of nodes in sleep mode. However, minimizing the number of coordinators does not ensure to increase the system lifetime. In this thesis, we propose an algorithm that can elect coordinators with considering the amount of necessary energy to transmit assigned data and a connectivity of nodes in the networks. The result of proposed coordinator election algorithm can increase the system lifetime of an Ad-hoc network from the results of existing coordinator election algorithms.

• Journal of the Korea Society of Computer and Information
• /
• v.29 no.6
• /
• pp.175-182
• /
• 2024

In wireless sensor networks, batteries limit lifespan, and heavy data transmission around the sink causes the hotspot problem. To address this, data collection amounts are allocated to child nodes to limit transmission. However, this approach has issues with nodes far from the sink having excessive energy and failing to transmit the allocated amount due to data transmission errors. This paper proposes a method to prevent sensor data loss through error recovery via retransmission. The method ensures that each node's retransmission volume stays within its allocated data amount and energy limits, using excess energy for error recovery. Simulations show that this technique effectively recovers data transmission errors, collects data, minimizes energy depletion around the sink, and increases data collection rates.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.41 no.9
• /
• pp.1044-1053
• /
• 2016

In this paper, we consider the secondary users (SUs) who are capable of harvesting energy from ambient radio frequency (RF) signals and are allowed to sequentially sense up to 2 different channels to find out idle channels not occupied by the primary users (PUs). The EH SUs are permitted to transmit data packets only if both idle channels and sufficient energy are available. Compared with traditional SUs, the EH SUs consume energy with data transmission and also harvest energy without additional energy supply. Consequently, the battery state is expected to be fluctuated due to energy consumption and harvesting, and therefore we develop a Markov battery model to provide energy variations at the 2-channel sensing EH SUs. With the proposed battery model, we derive the steady-state probability that the EH SUs completely run out of energy, and the achievable throughput of EH SUs is derived accordingly. To evaluate the proposed Markov battery model, the Monte-Carlo simulation was performed to validate the accuracy of energy outage probability and achievable throughput at the 2-channel sensing EH SUs.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2012.05a
• /
• pp.876-879
• /
• 2012

In this paper we studied the radiation detection technology which described the radiation level distribution in high radiation area with remotely and safely. The designed radiation mapping system was composed of radiation nodes and radiation station. The radiation nodes could sense the radiation dose values with pMOSFET radiation sensors and transmit them to the radiation station. At the radiation station the received radiation values were merged with a geometric information and visualized at the virtual graphic location. For the functional verification of the above system, we attached the radiation nodes to each corner in our laboratory, executed the mapping tests, and confirmed the designed functions finally.

• The Journal of the Acoustical Society of Korea
• /
• v.12 no.1
• /
• pp.47-54
• /
• 1993

Performance analysis is very important to transmit the high quality information and to construct the optimal system for the minimze the noise from the channel of spread spectrum system. In this paper the error rate performance is analyzed with computer simulation in noncoherent frequency hopping M-qry frequency shift keying(FH/MFSk) systems with regard to thermal noise under the partial band jamming environments. AS a result, in case the thermal noise is disregarded, bit error probability of system in jamming fraction ρ and Eb/Nj(bit energy to jamming power density) is reduced with the increase of K and in worst case 32FSK system is better than 2FSK system by 3.23dB with the variatio of Eb/Nj. In case thermal noise is considered, bit error probability of system by 3.23dB with the variation of Eb/Nj. In case thermal noise is considered, bit error probability of system are reduced with the increase of K and Eb/No(bit energy to thermal noise density). Bit error probability in connection with worst case ρ is not largely influenced form over the 14dB to K=1 and 8dB to K=5 accordingly thermal noise disregarding. These results may be useful for avoiding the common vulnerabilities when the spread spectrum system is designed.

• Smart Structures and Systems
• /
• v.15 no.6
• /
• pp.1625-1642
• /
• 2015

We propose an electrically self-reliant structural health monitoring (SHM) system that is able to wirelessly transmit sensing data using electrical power generated by vibration without the need for additional external power sources. The provision of reliable electricity to wireless SHM systems is a highly important issue that has often been ignored, and to expand the applicability of various wireless SHM innovations, it will be necessary to develop comprehensive wireless SHM devices including stable electricity sources. In light of this need, we propose a new, highly efficient vibration-powered generator based on a tuned-mass-damper (TMD) mechanism that is quite suitable for vibration-based SHM. The charging time of the TMD generator is shorter than that of conventional generators based on the impedance matching method, and the proposed TMD generator can harvest 16 times the amount of energy that a conventional generator can. The charging time of an SHM wireless transmitter is quantitatively formulated. We conduct wireless monitoring experiments to validate a wireless SHM system composed of a self-reliant SHM and a vibration-powered TMD generator.