• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.23 no.7
• /
• pp.1817-1823
• /
• 1998

V.42bis, a type of LZW(Lempel-Ziv-Welch) code, is well-known as theinter national standard is asynchronous data compression. In this paper, we analyze several undesirable phenomena arising from the application of v.42bis to high speed data transmission, and we propose a modified technique to overcome them. the proposed technique determines the proper size of the dictionary, one of important factors affecting the compression ratio, and improves the method of dictionary generation for a higher compression ratio. Furthermore, we analyze the problem of excessive mode changes and solve it to a certain degree by adjusting the threshold for mode change. By doing this, we can achieve smiller variation of the compression ratio in time. This improvement chtributes to easier and better design and control of the buffer in high speed data transmission.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2009.10a
• /
• pp.899-901
• /
• 2009

The magnesium fluoride ($MgF_2$) has very higher optical transmission than oxide or nitride material applied for gas barrier, so we manufactured Mg-Zn-F films with Mg-Zn-F target mixed in the various ratio of $MgF_2$ to Zn and characterized films' properties. Zn is used to increase packing density of barrier film. Thickness and optical transmission of Mg-Zn-F are 200 nm and over 90 %, respectively. The result of water vapor transmission rate at 38, RH 90 ~ 100% of the Mg-Zn-F film deposited with 4 : 6 ($MgF_2$ : Zn) ratio target reached below $1{\times}10^{-3}g$/($m^2{\cdot}day$), measuring limit of instrument.

• Journal of Broadcast Engineering
• /
• v.20 no.2
• /
• pp.248-256
• /
• 2015

In this paper, we model the interference plus noise signal for terrestrial cloud transmission systems and present bit error rate (BER) performances. Since terrestrial cloud transmission systems experience co-channel interference from one or more transmitters, they have to operate under a negative signal-to-interference plus noise ratio (SINR) region. The interference plus noise signal can be modeled as Gaussian random variable under the required SINR region and we observe the BER performance of the cloud transmission system using the derived model. Also, we propose an improved channel estimation scheme by averaging the channel estimates based on least square based interpolation scheme. Simulation results show that the cloud transmission system can operate under negative SINR region using the proposed channel estimation scheme.

• Structural Engineering and Mechanics
• /
• v.90 no.1
• /
• pp.27-40
• /
• 2024

The prediction of VIV amplitude is essential for the design and fatigue life estimation of steel tubes in tubular transmission towers. Limited to costly and time-consuming traditional experimental and computational fluid dynamics (CFD) methods, a machine learning (ML)-based method is proposed to efficiently predict the VIV amplitude of steel tubes in transmission towers. Firstly, by introducing the first-order mode shape to the two-dimensional CFD method, a simplified response analysis method (SRAM) is presented to calculate the VIV amplitude of steel tubes in transmission towers, which enables to build a dataset for training ML models. Then, by taking mass ratio M^*, damping ratio ξ, and reduced velocity U^* as the input variables, a Kriging-based prediction method (KPM) is further proposed to estimate the VIV amplitude of steel tubes in transmission towers by combining the SRAM with the Kriging-based ML model. Finally, the feasibility and effectiveness of the proposed methods are demonstrated by using three full-scale steel tubes with C-shaped, Cross-shaped, and Flange-plate joints, respectively. The results show that the SRAM can reasonably calculate the VIV amplitude, in which the relative errors of VIV maximum amplitude in three examples are less than 6%. Meanwhile, the KPM can well predict the VIV amplitude of steel tubes in transmission towers within the studied range of M^*, ξ and U^*. Particularly, the KPM presents an excellent capability in estimating the VIV maximum amplitude by using the reduced damping parameter S_G.

• Proceedings of the KSME Conference
• /
• 2004.11a
• /
• pp.731-736
• /
• 2004

In this study, a linearized model of pneumatic cylinder position control system including transmission line is proposed. The transmission line using compressible fluid has a nonlinear transfer characteristics because that the frequency response of it is changed by the flowing state of the fluid. But, when the pressure difference between both sides of transmission line is low, the effect of resonance characteristics of it under high frequency range can be neglected because of the friction force and low pass characteristics of the position control system. Therefore, the transmission line can be modeled by second order transfer function and the natural frequency, damping ratio and gain are changed by the diameter and length of it. The effectiveness of the proposed model is proved by comparison of simulation results using proposed model with experimental results and simulation results using conventional model.

• International journal of advanced smart convergence
• /
• v.9 no.1
• /
• pp.10-18
• /
• 2020

In the case of a belt-pulley type CVT that transmits a driving force by using a variable pulley and a metal belt, slippage occurs due to transmission of power by using a belt, which results in a decrease in efficiency. Therefore, in this study, the rails were machined on the plate surface of the pulley to reduce the friction and slip between the belt and the pulley while applying the characteristics of the CVT. As the plate is rotated by the shape of the rail, a centrifugal belt pulley type continuously variable transmission system which shifts while varying the radius of rotation of the belt that transmits power is studied. Accordingly, the structure of the pulley was designed and the centrifugal belt pulley type continuously variable transmission was Manufactured. In addition, to verify the suitability of the manufactured transmission, the power transmission efficiency was monitored by establishing an interface with the controller. The structural analysis of the plate proved the suitability of the centrifugal belt pulley type continuously variable transmission.

• ETRI Journal
• /
• v.25 no.6
• /
• pp.437-444
• /
• 2003

We derive a new joint power and rate control rule with which we can minimize the mean transmission delay in CDMA networks for a given mean transmission power. We show that it is optimal to respectively control the power inverse-linearly and the rate linearly to the square root of channel gain while maintaining the signal-to-interference ratio at a constant. We also show that the proposed joint power/rate control rule achieves excellent performance results in terms of the probability of the instantaneous delay being within a target delay against one-dimensional control schemes.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.8 no.2
• /
• pp.424-442
• /
• 2014

Most recent research on iterative solutions for interference alignment (IA) presents solutions assuming channel reciprocity based on the suppression of interference from undesired sources by using an appropriate decoding matrix also known as a receiver combining matrix for multiple input multiple output (MIMO) interference channel networks and reciprocal networks. In this paper, we present an alternative solution for IA by designing precoding and decoding matrices based on the concept of signal leakage (the measure of signal power that leaks to unintended users) on each transmit side. We propose an iterative algorithm for an IA solution based on maximization of the signal-to-leakage-and-noise ratio (SLNR) of the transmitted signal from each transmitter. In order to make an algorithm removing the requirement of channel reciprocity, we deploy maximization of the signal-to-interference-and-noise ratio (SINR) in the design of the decoding matrices. We show through simulation that minimizing the leakage in each transmission can help achieve enhanced performance in terms of aggregate sum capacity in the system.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2008.03a
• /
• pp.42-50
• /
• 2008

To evaluate rock bolt integrity, destructive test such as pull-out test has been commonly carried out. This method is known as time consuming, expensive, and inaccurate procedure. To improve destructive method, non-destructive techniques using transmitted guided ultrasonic waves were suggested. Note for the transmission method, the source for the generation of ultrasonic waves should be installed during the rock bolt construction. The purpose of this study is to investigate the reflection method using reflected guided ultrasonic waves to evaluate the integrity of the rock bolt grouted, and to compare the results evaluated by the reflection and transmission methods. The guided waves are generated by PZT element and received by AE sensor. The measured signals are analyzed by the wavelet transform. The results show that the energy velocities of guided ultrasonic waves increase with the defect ratio in both transmission and reflection method. The reflection method produces the lower velocity in all defect ratio. This research demonstrates that the reflection method may be suitable and easer method for the field tests.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.14 no.6
• /
• pp.1436-1445
• /
• 1990

Performance of vehicles depends mainly on engine performance, transmission gear ration and shifting pattern. In this paper, determination method of gear ratios and shifting pattern for automatic transmission equipped vehicles has been proposed. Computer programs for gear ratio determination and shifting pattern decision using optimal design technique have been developed for the purpose of increasing vehicle acceleration performance. For preceding study, computer simulation of vehicle performance is carried out using numerical technique.