• Transactions of the Korean Society of Automotive Engineers
• /
• v.6 no.1
• /
• pp.90-98
• /
• 1998

A Dual Mass Flywheel(D.M.F.) system is an evolution to the reduction of torsional vibration and impact noise occurring in powertrain when a vehicle is either moving or idling. The D.M.F. system has two flywh-eels, which is different from the conventional clutch system. One section belongs to the mass moment of in-ertia of the engine-side. The other section increases the mass moment of inertia of the transmission-side. These two masses are connected via a spring/damping system. This reduces the speed at which the dreaded resonance occurs to below idle speed. Since 1984m D.M.F. system has been developed. However, the processes of development of D.M.F. system don't have any difference from the trial and error method of conventional clutch system. This paper present the method for systematical design of D.M.F. system with dimensionless design varia-bles of D.M.F. system, mass ratio between two flywheels, natural frequency rate of two flywheels, and visc-osity coefficient. And expermental results are used to prove these theoretical results.

• Journal of the Korean Geotechnical Society
• /
• v.23 no.4
• /
• pp.149-160
• /
• 2007

Six prototype field tests (five 1/8 and one 1/2 scale tests) have been conducted in order to determine the uplift resistance of deep foundation for transmission line structures. Test sites, located in the city of Eumseng in Choongbuk province, are classified as gneiss. These test results reveal failures not along the foundation-rock interface but either along the damaged surrounding rock mass caused by excavation or along the pre-existing rock joint. Test results also show the uplift resistance which is 20 $\sim$ 30% higher than the current design strength of side friction. In addition to fold tests, four concrete core samples between the liner plate and the surrounding rock mass have been obtained from the existing transmission foundations to study the effect of the liner plate which is installed prior to placing concrete. The compressive strength of these concrete core samples shows 63 $\sim$ 72% of the strength at the time of foundation construction. Side frictional resistance based on such less compacted concrete reaches satisfying uplift design strength.

• Journal of Industrial Technology
• /
• v.31 no.A
• /
• pp.33-38
• /
• 2011

In an express tilting train, side wall insulating the noise from the exterior sound source consists of two parts. One is the layered composite panel including aluminum honeycomb, glass wool and nomex honeycomb. The other is the double glazed window. In this study, sound insulation performance of the two parts is investigated by mass law and experiment. Based on ASTM E2249-02, the intensity sound transmission loss (TL) is measured on the specimens of the two parts. Mass law deviation (MLD) is considered in order to compare the sound insulation performance in respect of weight. Contribution of each part to the sound insulation is analyzed and the sound insulation strategy for the interior noise reduction is investigated.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 1996.10a
• /
• pp.167-172
• /
• 1996

A Dual Mass Flywheel system is a evolution to the reduction of torsional vibration and impact noise occuring in powertrain when a vehicle is eit-her moving or idling. The name already explains what it is : The mass of the conventional single mass flywheel is divided. One section continues to belong to the mass moment of inertia of the engine-side. The ot-her section increass the mass moment of inertia of the transmission-side. The two masses are connected via a spring /damping system. This reduces the speed at which the dreaded resonance occurs to below idle speed. Since 1984 Dual Mass Flywheel has been de-veloped again and again. But the prosidures of de-velopment of D.M.F system didn't have had differe-nce from conventional clutch system's trial and err-or This paper presents the method for systematical design of D.M.F system with demensionless design variables of D.M.F system mass ratio between two flywheels λ. natual frequency rate of two flywheel s, ${\gamma}$and viscosity coefficient ζ. And experimental re-sults are used to prove these theoretical results.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2011.10a
• /
• pp.457-462
• /
• 2011

The sidewall of the HEMU-400x consists of two parts. One is the multi-layered structure including aluminium extruded panel and the other is the double glazed window. When the train runs in a tunnel, the equivalent sound insulation performance of the side wall significantly influences the internal noise levels. In aspect of the sound insulation strategy, it is important to make two parts have similar performance. In this study, the intensity sound transmission loss (ITL) is measured on the specimens of the two parts. Mass law deviation (MLD) is considered in order to compare the sound insulation performance of the two parts in respect of the weight. Contribution of each part to the sound insulation is analyzed and the sound insulation strategy is investigated to reduce the interior noise.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.34 no.12
• /
• pp.1931-1936
• /
• 2010

In Korean tilting trains, honeycomb composite panels are used for high speed and light weight. The side wall of a tilting train consists of an aluminum honeycomb coated with carbon-fiber-reinforced epoxy skin and a nomex honeycomb panel as the main structure, with glass wool inserted between the panels. In this study, based on ASTM E2249-02, we measure the intensity sound transmission loss (TL) of the honeycomb composite panels. Using mass law deviation (MLD), we estimate the sound insulation performance of the honeycomb composite panels in terms of their weight and explore the feasibility of substituting a conventional corrugated steel panel. The transmission-loss data of the honeycomb composite panels obtained in the study will be used to establish noise-reduction measures for train compartments.

• Food Science and Preservation
• /
• v.7 no.1
• /
• pp.1-7
• /
• 2000

To develop natural antimicrobial agents for keeping qualities of postharvested greenhouse produce the antimiocrobial actions of Polygonum cuspidatum Sieb. et Zucc. extract , which showed remarkable antimicrobial effects against microorganism causing the postharvest decay of greenhouse produce, were investigate. In the inhibitory experiment of enzymes related to energy production metabolism hexokinase activities decreased to 73% and 68% by treating with Polygonum cuspidatum Sieb. et.Zucc. extract and Eugenia caryophyllata Thumnberg extract in comparison with control, respectively. Direct visualization of microbial cells by using both transmission electron microscope and scanning electron microscope showed that microbial cell membrane was destroyed by treating with the dilute extract solution. this change of celluloar membrane permeability could be identified in the experiment that 0-nitrophenyl-${\beta}$-D-galactopyrano-side(ONPG), the artificial substrate of ${\beta}$-galactosidase, was hydrolyzed in the presence of the extract, indicating that the membrane was perturbed. The separation and identification of the most antimicrobialo substances isolated from Polygonum cuspidatum Sieb et. Zucc. extract and Eugenia caryophyllata Thunberg extract were carried out by using gas chromatography and mass spectrometry 9GC/MSD), which were identified as eugenol. As a result, the functionality of Polygonum cuspidatum Sieb. et Zucc. extract and Eugenia caryophyllata Thunberg extract as antimicrobial agents for keeping qualities of postharvested greenhouse produce may be recommended.

• Journal of the Korea Society of Computer and Information
• /
• v.17 no.3
• /
• pp.41-50
• /
• 2012

In the monitoring system based on web service application, it is faced with the problems like code reproduction, difficult scalability and error recovery derived from the frequent change of data structure. So we propose a technique of monitoring system by DTD(Document Type Definition) automatic generation. This technique is to use dynamic server-side script to cope with the change of sensor data structure, generate the DTD dynamically. An it also adapt the AJAX(Asynchronous JavaScript and XML) for XML data parsing, it can support mass data transmission and exception processing for data loss and damage. This technique shows the result of recovery time is decreased about 44.8ms in case of temporary data failure by comparing to the conventional XML method.

• Applied Microscopy
• /
• v.37 no.4
• /
• pp.249-258
• /
• 2007

The Pancreatic islet are the clusters of endocrine cells scattered through out the exocrine pancreas. Transplantation of a sufficient pancreatic islets can normalize blood glucose level so that may prevent devastating complications of type I diabetes(IDDM) and other side effects of the IDDM. Recently, there are several approaches to transplant sufficient pancreatic islet, and it was comprised in increase or regeneration of the endogenous $\beta$-cell mass from donor's pancreas, but relatively few studies have been devoted to the morphological characters of the isolated and 3 day cultured pancreatic islets. We investigated morphological pattern of intracellular structure of isolated and 3 day cultured pancreatic islets. The morphological characters of the pancreatic islets were observed by scanning electron microscope and transmission electron microscope, and insulin distribution of the each islets were observed by transmission electron microscope, and were labeled with insulin antibody. Intracellular structures including nuclei, mitochondria, RER, Golgi complex and many secretory granules were normally appeared in the isolated pancreatic islets which was extracted immediately dornor's pancreas, however, There is a significant morphological changes between the 3 day cultured pancreatic islets and isolated islets. 3 day cultured pancreatic islet's $\beta$-cells had normal nuclei but increased cytoplasm mass and RER and developed Golgi complex. Insulin secretory granules were decreased in numbers rather than isolated pancreatic islet. In this study, the pattern of intracellular structure variation was examined during pancreatic islet culture. Most distinct features are variation of the insulin secretory granules, and developed RER, and dilated golgi complex. Therefore, we suggested that the various change of the morphological characters on cultured pancreatic islets were responsible for the function(biosynthesis and secretion of insulin) and growth. These results were also cultured islets have greater ability to recover and maintain normoglycemia than isolated islet transplantation.

• Journal of the Korean Society of Radiology
• /
• v.2 no.2
• /
• pp.11-16
• /
• 2008

The most difficult of implementation PACS is large amount of data. Therefore, PACS needs mass storage, as well as rapid transmission time. Consequently, medical images needs compression when stored in PACS. WT(wavelet transform) was announced by Ingrid Daubechies and Stephane Mallat, WT was methods of signal analysis by a base functions set same as Fourie transform. This paper estimated an efficiency, that experimental medical images compressed by DWT. The result of estimated, we are knows effectiveness that display to remained signal in low frequency region after 4-level DWT form $512{\times}512{\times}2^8$ input images. Compression ratio of images by 4-level DWT was 1:16. It is a high compression ratio, the other side has a problem appears on staircase phenomenon.