• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.41 no.7
• /
• pp.71-79
• /
• 2004

Packet-type data transmission is characterized by the continuous transmission of massive data with relatively constant rate. In such transmission, the dynamic power consumed on buses is influenced by the sequence of transmitted data. A new coding scheme called Sequence-Switch Coding (SSC) is proposed in this paper. SSC reduces the number of bus transitions in the transmission of packet-type data by changing the sending order of the data. Some simple algorithms are presented, In. The simulation results show that SSC outperforms the well-known Bus-Invert Coding with these algorithms. SSC is not a specific algerian but a method to reduce the number of bus-transitions. There could be lots of algorithms for realizing SSC. The variety of SSC algorithms provides circuit designers a wide range of trade-off between performance and circuit complexity.

• Journal of Korea Society of Digital Industry and Information Management
• /
• v.13 no.2
• /
• pp.43-51
• /
• 2017

Recently, MANET has been used in many fields as the range of applications increases. However, the dynamic topology that MANET has makes it difficult to route and provides the cause of exposure to security vulnerabilities. Therefore, the security features that can be robust to many attacks must have been applied in the routing technique provided in the MANET. In this paper, we propose a secure routing method that secure route is established by reliability evaluation of nodes and secure data communication has applied through key exchange mechanism. The proposed technique used hierarchical structure for efficiency of reliability evaluation of nodes. The reliability of nodes is performed by trust management node and reliability of nodes managed periodically is broadcasted. And the key exchange for secure data transmission is dene without CA as the certificate issuing organization. This allows fast key exchange and the integrity of data transmission improved. The proposed technique improves the security of the data transmission because a secure route to the destination node is established by the reliability evaluation and the data transmission is performed after the key between the source node and the destination node is exchanged through the established route.

• Korean Journal of Remote Sensing
• /
• v.15 no.3
• /
• pp.209-216
• /
• 1999

KITSAT-3, the third satellite of KITSAT series which has been developed for the last four and half years with purely Korean design and implementation technology, was launched successfully at last. All subsystems were tested and validated during the initial operation of the satellite. During the initaial operation phase, the Earth imaging camera on board KITSAT-3 acquisited several tens of scenes all over the world and transmitted the image data to ground station. The quality of images and the reliability of data transmission-reception system were tested qualititively and quantititively, respectively. In this paper, we summarize the camera, data handling, on-board memory, and image data transmission system of KITSAT-3 as well as the image receiving and archiving system in ground station. The error rate of image data transmission and reception was tested during the initial operation phase. The average data transmission error rate satisfied the initial requirement of less than 1%. The error rate will be reduced through the continuous work of test and stabilization of the ground system hardware.

• KEPCO Journal on Electric Power and Energy
• /
• v.7 no.1
• /
• pp.73-77
• /
• 2021

As the big data analysis technologies has been developed worldwide, the importance of asset management for electric power facilities based data analysis is increasing. It is essential to secure quality of data that will determine the performance of the RISK evaluation algorithm for asset management. To improve reliability of asset management, asset data must be preprocessed. In particular, the process of cleaning dirty data is required, and it is also urgent to develop an algorithm to reduce time and improve accuracy for data treatment. In this paper, the result of the development of an automatic cleaning algorithm specialized in overhead transmission asset data is presented. A data cleaning algorithm was developed to enable data clean by analyzing quality and overall pattern of raw data.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2000.04a
• /
• pp.33-43
• /
• 2000

In order to streamline the procedure of data transmission in port and logistics industries, MOMAF introduced EDI systems as the method of data transmission of 19 documents 5 years ago. While operating EDI system, MOMAF has found the inconvenience and the inefficiency of using EDI systems in the field of requesting fast response. This thesis focuses on finding the possible fields of on-line processing system instead of EDI system and suggests the economic effects occurred by the on-line processing system. The result of the paper presents that if data transmission area such as 'ocean vessel entrance report', 'application for using tug boat'and 'application for pilot'is changed to on-line processing method, the processing cost and time will be reduced compared with EDI processing method.

• Journal of Sensor Science and Technology
• /
• v.25 no.2
• /
• pp.131-137
• /
• 2016

In this study, a multilevel visible light communication (VLC) system based on resistor ladder circuit is designed to transmit medical data. VLC technology is being considered as an alternative wireless communication due to various advantages such as ubiquity, license free operation, low energy consumption, and no radio frequency (RF) radiation characteristics. With VLC even in places where traditional RF communication (e.g., Wi-Fi) is forbidden, significant bio-medical signal including the electrocardiography (ECG) and photoplethysmography (PPG) data can be transmitted. More lives could be saved anywhere by this potential advantage of VLC with a fast emergency response time. A multilevel transmission scheme is adopted to improve the data capacity with keeping simplicity, where data transmission rate can increase by log2m times (m is the number of voltage levels) than that of conventional VLC transmission based on on/off keying. In order to generate multi-amplitudes, resistor ladder circuit, which is a basic principle of digital to analog convertor, is employed, and information is transferred through LED (Light-Emitting Diode) with different voltage level. In the receiver side, multilevel signal is detected by optical receiver including a photo diode. Then, the collected data are analyzed to serve the necessary medical care to the concerned patient.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.31 no.9A
• /
• pp.878-883
• /
• 2006

New emerging wireless broadband internet can make many broadband multimedia services. The networked intelligent mobile robot service is one of the new services. In the networked robot control, both the on-line real-time control and the reliability of control data transmission are very important. Considering the real-time control and data reliability, an efficient transmission method based on UDP protocol is proposed. The proposed method allocates the priority to the robot control data and the transmission of the robot data at the base station is carried out in duplicate manner. NS-2 simulation results show that the proposed scheme has a very low packet delay and low packet errors.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.39 no.5
• /
• pp.765-777
• /
• 2015

This study examined the e-WOM acception and transmission motive of Chinese online fashion product shoppers in their 20s and analyzed the effect of acception and transmission motive factors on acception and transmission behavior. This study investigated the effect of acception and transmission behaviors on purchase satisfaction. Analysis was conducted with data collected from 373 Chinese individuals in their 20s. Data were analyzed with factorial analysis, ANOVA, multiple regression analysis, chi-square test, paired t-test, and Cronbach's ${\alpha}$ using SPSS 18.0. The results were: 1. The factor analysis of e-WOM acception motive extracted two factors: risk reduction and confidence. The factor analysis of e-WOM transmission motive extracted three factors: Compensation/pleasure, advice, and emotion expression. 2. The two motives of e-WOM acception affected acception behavior. Confidence motive affected acception behavior more than risk reduction motive. The three motives of e-WOM transmission motives affected transmission behavior. Transmission behavior affected by advice, compensation/pleasure, and emotion expression in order of significance. 3. e-WOM acceptance behavior affected purchase satisfaction more than transmission behavior.

• Journal of Satellite, Information and Communications
• /
• v.11 no.3
• /
• pp.72-79
• /
• 2016

In this paper, we propose a Service-adaptive Tactical Data Transmission Protocol (STTS) based on Satellite Communications with narrow bandwidth. STTS is designed to provide additional field for scalability and scheduler for reliability of transport stream protocol based on digital broadcasting standard, DVB-S and DVB-S2. It is also verified the effects of lost data packets with narrow bandwidth through the simulator by traffic model and re-transmission of critical data, and checked the design considerations based on STTS system.

• Proceedings of the IEEK Conference
• /
• 2002.06c
• /
• pp.47-50
• /
• 2002

In this paper, the efficient transmission technique of real time video data over 3G wireless networks is presented. To understand the transmission characteristic of 3G networks on real time video data, we implemented the data transport structure of 3G wireless networks. Also this research is based on current 3G wireless network specification of 3GPP, 3GPP2 standard organization to evaluate the result over real 3G wireless network environment. The retransmission by radio link layer results in the delay factor. To implement video data transmission efficiently, we Propose to use both no-retransmission and forward error correction method.