• Korean Journal of Optics and Photonics
• /
• v.18 no.1
• /
• pp.8-13
• /
• 2007

In this paper, we analyze the optical properties of the transmission grating recorded in a reflection-type photopolymer. Recording and reconstruction of the micropattern using a total internal reflection hologram applied to a reflection type photopolymer are studied. The transmission-type photopolymer was shown to have the maximum diffraction efficiency in $40^{\circ}C$ symmetric structure. However, that of reflection type photopolymer was more than 90% at $60{\sim}80^{\circ}$. The line and point patterns with the interval of $1{\mu}m$ are recorded successfully and can be observed when the micro objective lenses with 10 and 100 time magnification are used.

• ETRI Journal
• /
• v.28 no.1
• /
• pp.1-8
• /
• 2006

A novel all-optical gain-controlled (AOGC) bidirectional amplifier is proposed and demonstrated in a compact structure. The AOGC function using fiber Bragg grating (FBG) pairs controls both directional signals independently, and combinations of optical interleavers and isolators suppress Rayleigh backscattering (RB) noise. The amplifier achieves high and constant gain with a wide dynamic input signal range and low noise figure. The performance does not depend on the input signal conditions, whether static-state or transient signals, or whether there is symmetric or asymmetric data traffic on bidirectional transmission. Transmission comparison experiments between invariable symmetrical and random variable asymmetric bidirectional data traffic verify that the all-optical gain control and bidirectional amplification functions are successfully combined into this proposed amplifier.

• KIEE International Transactions on Electrophysics and Applications
• /
• v.11C no.3
• /
• pp.63-69
• /
• 2001

Holographic transmission gratings were performed by an Ar-laser( ${\lambda}$=514nm) intensity, the ratio fo LC contents to the surfactant. The addition of the surfactant to the LC and pre-polymer systems causes the droplet to maintain the ideal size at the high fraction(over 40wt%) of the LC contents that induce the films to be fabricated with high diffraction efficiency than that of no surfactant series. The image of these films was examined using a charge coupled device (CCD). We also studied the angular selectivity plots which support the important role in the multiplexer channel (MUX). Eventually, we showed the reconstructive optical image recorded in this transmission mode of HPDLCs.

• Journal of the Korean Physical Society
• /
• v.73 no.11
• /
• pp.1698-1702
• /
• 2018

We simulate the light transmission through an extremely small nanoscale aperture having a 10 nm diameter punctured in a metal film positioned at the center of a plasmonic bull's eye grating. A considerable directive emission of transmitted light with a divergence angle of 5.7 degrees was observed at $10{\mu}m$ from the nanohole opening at the frequency of surface plasmon polariton excitation, an confirmed by measuring the distance dependent transmission amplitude. Observations of the electric field in cross-sectional, near-field, and far-field views near-field enhancement associated with the surface plasmon excitation, and the interference of the electric field light through the nanohole in the near-field region is responsible for such a considerable directive emission.

• Korean Journal of Optics and Photonics
• /
• v.12 no.2
• /
• pp.129-134
• /
• 2001

Novel supervisory system for WDM transmission link using conventional optical time domain reflectometry was presented. By modifying the structure of erbuim doped fiber amplifier to support bi-directional transmission at arDR pulse wavelength and launching the optical pulse into transmission link in the opposite direction of data signal propagation to avoid the distortion by cross-gain modulation, it is possible to monitor the WDM link in service. To prove the validity of proposed scheme, the supervision result of 2.5 Gbps $\times$ 8 channel WDM 320 km transmission system in service by arDR was presented. And power penalty due to monitoring was measured as smaller than 0.3 dB. .3 dB.

• Korean Journal of Optics and Photonics
• /
• v.16 no.1
• /
• pp.13-20
• /
• 2005

Fiber-Bragg-grating external cavity laser(FGL) modules were fabricated and experimentally analyzed. Proposed as a cost-effective solution for optical sources in the WDM-PON access network, FGL modules were packaged to TO-CAN type. We obtained a low threshold current of 13 mA, and an optical output power of 3.6 mW with a bias current of 60 mA at $25^{\circ}C$. The lasing wavelength dependencies on current and temperature were as small as 5.2 pm/mA and 30 pm/$^{\circ}C$, respectively. These change rates of the wavelength with the temperature and current are smaller than those of the DFB laser. Single-mode oscillations with the side-mode suppression ratio(SMSR) over 30 dB are maintained above the threshold current level. The FGL modules can be directly modulated at 155 Mbps, PRBS(2$^{23}$ -1) NRZ signal. Through the BER plots, we did not see the significant degradations before and after the transmission over 20km of the SMF at 155 Mb/s.

• Proceedings of the IEEK Conference
• /
• 1998.10a
• /
• pp.359-362
• /
• 1998

The electromagnetic properties of leaky-waves guided by metal-strip grating configurations can be phrased in rigorous modal theory. Such a modal solution expressed by simple electrical transmissionline networks is utilized to analyze the leakage and filtering characteristics of metal-strip gratings. In particular, the modal transmission-line theory can serve as a template for computational algorithms that systematically evaluate the radiation effects that are not readily obtained by other methods.

• Proceedings of the Korea Electromagnetic Engineering Society Conference
• /
• 2005.11a
• /
• pp.3-6
• /
• 2005

In this thesis, We researched on the characteristics of optical tunable filter that selects the channel by the wavelength changes of transmission spectrum when we apply outer physical quantities on a fiber bragg grating by using Fabry-Perot Interformer's operational principle.

• Proceedings of the Optical Society of Korea Conference
• /
• 2000.02a
• /
• pp.268-269
• /
• 2000

We demonstrate a polarization insensitive waveguide filter using quantum well intermixing(QWI). The bandgap of epitaxial layer is modified from 1.55${\mu}{\textrm}{m}$ to 1.40${\mu}{\textrm}{m}$ using QWI and a Bragg grating filter is demonstrated using electron beam lithography technology. The fabricated waveguide filter has a 70% reflection efficiency and a 1.46nm filter bandwidth. Furthermore polarization insensitive transmission characteristics are observed. The device can be applied to photonic integrated circuits(PIC).

• Proceedings of the Optical Society of Korea Conference
• /
• 2003.02a
• /
• pp.246-247
• /
• 2003

In recent years, soaring traffic volumes over optical communications networks lead to the rapid advances in information communications equipments. In backbone communications networks, there has been an advance in high-density transmission through DWDM, which can simultaneously transmit numerous signals with different wavelengths. When the channel spacing is narrower, the cross-talk between channels an important parameter that guarantees to the high performance of a whole system, becomes critical. (omitted)