• 한국전자파학회논문지
• /
• 제22권9호
• /
• pp.875-880
• /
• 2011

본 논문에서는 기존의 인덕터와 커패시터 소자만을 이용하여 2D cloaking 회로의 단일 셀을 설계했을 경우의 단점을 보완하기 위하여 2D 전송선 구조를 이용한 cloaking 회로를 설계하고 분석하였다. 2D 전송선 구조를 이용할 경우, 단일 셀의 크기와 필요한 소자의 값을 사용 가능한 범위 안에서 조절할 수 있다는 장점이 있다. 이에 필요한 모든 설계식을 유도하였다. 자유 공간에 완전 도체로 이루어진 원통형 산란체를 상정하고, 이에 대한 cloaking 회로를 유도된 설계식을 이용하여 설계하고 이에 대한 cloaking 효과를 우선 회로 시뮬레이터인 ADS를 이용하여 살펴보았다. 제시된 시뮬레이션 제원에서 cloaking medium 효과는 10.5 dB 이득으로 나타났다.

• 한국전기전자재료학회논문지
• /
• 제35권1호
• /
• pp.66-71
• /
• 2022

The insulator used for the transmission line is a device that is bonded with a cap, pin, ceramic, and cement to withstand insulation capacity and mechanical load. The insulator design can help to reduce the dispersion of the electric field; thus, the optimization of today's design, especially as demanded power grows, is critical. The designs of four manufacturers were used to perform a comparative analysis. Under dry circumstances of the new product, an electric field distribution study was done with no pollutants attached. Manufacturer D's design has the best voltage uniformity of 24.33% and the arc length of 500 mm or more. Manufacturer C's design has an equalizing voltage of more than 2% higher than that of other manufacturers. The importance of the design of the insulator and the number of connections according to the installation conditions is very efficient for transmission lines that will increase in the future.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2004년도 학술대회지
• /
• pp.880-882
• /
• 2004

This paper presents the design and simulation results of 7 waveguide dielectric rod array antennas for 7 channel DBF(Digital beamformer) receivers for stratospheric system. A waveguide. dielectric antenna type, which has FTEP(Flat-toped element pattern) to manufacture easily. Also, the calculated element patterns according to the permittivity are compared. The designed antenna will be used for generating multibeam radiation pattern by means DBF.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2003년도 하계종합학술대회 논문집 I
• /
• pp.238-241
• /
• 2003

The purpose of this study is to improve the frequency response of the Line coupler for Power Line Communication. We separate transmission and reception line coupler and design the reception line coupler using GIC. It was found from the result that separation transmission and reception line coupler using GIC have the advantage of a design and high Q.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2000년도 추계학술대회 논문집 학회본부 C
• /
• pp.553-555
• /
• 2000

Recently polymer insulators are being used for outdoor high voltage applications. Polymer insulators for transmission line have significant advantages over porcelain and glass insulators, especially for ultra-high voltage(UHV) transmission lines. In this paper, the design trend and method polymer insulator are investigated and Aging test method is analysed to know life time of insulator.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2001년도 춘계학술대회 논문집
• /
• pp.622-626
• /
• 2001

Every design activity has a goal of satisfying a set of functional requirement. The commencement of a design, therefore, must have its foundation upon the identification of the functional requirements. Many of the design practices of the industrial examples can be categorized as design of small systems that are defined to have limited and fixed sets of functional requirements to be satisfied at all times. In the case of small systems it facilitates the construction of a knowledge-based system for a specific purpose to decompose the functional requirement and map ones in the lowest level into specific design features. When the number of design features is large, they need to be managed by groups. This paper suggests a grouping method for design process can be regarded as a series of selections of the predefined functional primitives according to the requirements and the preceding selections. An intelligent product design system for automatic transmission lever design is developed as an example.

• 조명전기설비학회논문지
• /
• 제25권7호
• /
• pp.72-77
• /
• 2011

Dynamic Line Rating (DLR) techniques have been greatly worthy of notice for efficiently increasing transmission capacity as well as controlling load-flow in overhead transmission lines, in comparison with the existing power system operating with Static Line Rating (SLR). This paper describes an utilization method to implement DLR control system for old transmission lines built in the first stage using the ground clearance design standard with lower dips. The suggested DLR system is focused on designing as temperature control system rather than current/load control system. Based on several performance for conductor temperatures, it is shown that DLR system with efficiency can be implemented.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2001년도 춘계학술대회 논문집 전력기술부문
• /
• pp.65-67
• /
• 2001

This paper presents an application of UML(Unified Modeling Language) to develop the Transmission Loss Calculation Package (TLCP) and shows a feasibility of UML design for the power system analyzing software. In the rapidly restructuring electric power industry, it is required the development of efficient and transparent transmission pricing mechanism. This should be based to calculate an accurate transmission loss to prompt a fair competition and to give unbiased signals to all the market players. For those reasons, it is necessary to develop a software system for transmission loss calculation. In this paper, we design the TLCP based on UML, and describe using Rational Rose 2000.

• 한국공작기계학회논문집
• /
• 제15권2호
• /
• pp.44-50
• /
• 2006

A driver's feelings of transmission serve as a basis to judge not only the transmission but also the entire automobile that he or she drives. The importance of transmission feelings is increasing daily because of driver's desire for increased torque and other improved functions. In order to accommodate such desire of drivers, new friction materials have been developed. The study in this report compared the affects of such materials and the force for transmission theoretically and empirically. By doing so, the study attempted to establish basic references for computation of capacity and other factors to be determined at the time of design of synchronizer system.

• Journal of Mechanical Science and Technology
• /
• 제18권3호
• /
• pp.471-480
• /
• 2004

Statistical simulation approaches are proposed to evaluate the shift feeling for a manual transmission. First, shift force simulator for the manual transmission is developed by considering the dynamic models of the external and internal linkage, synchronizer, and drivetrain. It is found that the shift force by the simulator shows a good correlation with the test results. Using the simulator, two kinds of statistical simulation approaches are proposed and the objective parameters that can be used to evaluate the shift feeling quantitatively are obtained. It is expected that the shift force simulator with the statistical approaches, developed in this study can be used as a useful design tool to evaluate the shift feeling in the initial design stage.