• Journal of Information Technology Services
• /
• v.9 no.2
• /
• pp.151-161
• /
• 2010

Recently, as the era of ubiquitous has arrived, an infrastructure for the short-distance wireless communication has been extended socially, and thus a variety of services are being proposed. The Multimedia Contents Delivery System using the ZigBee, in particular, has an important stance in enlargement of a variety of services in the aspect of individual-oriented service support though Wireless Personal Area Network (WPAN). Nonetheless, the ZigBee, or the IEEE 802.15.4 Standard, has many restrictions on the Multimedia Contents Delivery System due to the low data transport rate. In order to improve the ZigBee which presents a limit on the transport rate at the IEEE 802.15.4 Standard, this thesis has designed the burst mode which is a method of transmitting a certain amount of data in block units at a high speed without any stoppage until the completion of the transmission. Also, to provide a Multimedia Contents Delivery Service with an application of the normal data transmission mode, it improved the transmission performance of the ZigBee. In addition, for the Multimedia Contents Delivery Service under the ubiquitous environment, it designed and implemented a broadcasting Multimedia Contents Delivery System based on the ZigBee to conduct a comparative analysis on the data transmission performance according to the transmission method.

• Journal of Korea Game Society
• /
• v.6 no.2
• /
• pp.51-60
• /
• 2006

Smoothing is a transmission plan where variable rate video data is converted to a constant bit rate stream. Among them are CBA, MCBA, MVBA, PCRTT and others. But, in these algorithm, a transmission plan is made in according to stored frame sequence in these algorithms. In case that the number of bytes in frames in GOP differs greatly each other, this may cause unnecessary transmission rate changes and may require high transmission rates abruptly when frame's byte is large. In result, it is difficult to use efficient network resource. In this paper, we proposed a smoothing algorithm that find the optimal frame sequence in short time by using backtracking method and smoothing's structure for the proposed smoothing algorithm. This algorithm decides the sequence of frames which requires the lowest variance of frame's bytes in GOP and make a transmission plan. In order to show the performance, we compared with MVBA algorithm by various evaluation factors such as the number of rate changes, peak rate, rate variability.

• The KIPS Transactions:PartC
• /
• v.14C no.7
• /
• pp.597-602
• /
• 2007

In conventional cooperative communication data rate is 1/2 than non cooperative protocols. In this paper, we propose a full data rate DF (Decode and Forward) cooperative transmission scheme. Proposed scheme is based on time division multiplexing (TDM) channel access. When DF protocol has full data rate, it can not obtain diversity gain under the pairwise error probability (PEP) view point. If it increases time slot to obtain diversity gain, then data rate is reduced. The proposed algorithm uses orthogonal frequency and constellation rotation to obtain both full data rate and diversity order 2. Moreover, performance is analyzed according to distance and optimized components that affect the system performance by using computer simulation. The simulation results revealed that the cooperation can save the network power up to 7dB over direct transmission and 5dB over multi-hop transmission at BER of $10^{-2}$. Besides, it can improve date rate of system compared with the conventional DF protocol.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.33 no.4
• /
• pp.15-20
• /
• 2001

The function of the moisture-proof paper is to prevent moisture from adsorbing into the packed goods. Water-vapor transmission rate of the moisture-proof paper should be less than 100g/$m^2$.24hr and the optimum rate would be less than 50g/$m^2$.24hr. In general the moisture-proof paper has been made by laminating polyethylene or polypropylene on top of the base paper. However this kind of moisture-proof paper has a problem in recycling so that it brings about environmental pollution. In general the moisture-proof paper has been made by laminating polyethylene or polypropylene on top of the base paper. However this kind of moisture-proof paper has a problem in recycling so that it brings about environmental pollution. The purpose of this paper was to make moisture-proof paper using the mixture of SB latex and wax emulsion which was recyclable and environmentally friendly. Water vapor transmission rate showed less than 50g/$m^2$.24hr in mixture ratio of 85:15, 87:13, 90:10. Especially the mixture ratio of 87:13 showed the most favorable water-vapor transmission rate. However, the moisture-proof layer was destroyed slightly by folding in packing. It has been observed that there was no close relationship between water-vapor transmission rate of the moisture-proof paper and grammage of the base paper, but the density of base paper had influenced on water vapor transmission rate. It was also observed that the moisture-proof paper could be recycled. The moisture-proof paper was similar to base paper in degree of the pulping, and there was no significant difference in dispersion between moisture-proof paper and base paper. Most of wax particles which caused the spots during drying process could be removed by flotation process. Tensile strength and tear strength of both moisture-proof paper and base paper after pulping were measured to examine the fiber bonding, and no significant difference in physical properties was observed.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.12 no.7
• /
• pp.3176-3183
• /
• 2011

Traffic and congestion control in the wireless sensor network is an important parameter that decides the throughput and QoS (Quality of Service). This paper proposes a transmission rate priority-based traffic control scheme to serve digital contents streaming in wireless sensor networks. In this paper, priority for transmission rate decides on the real-time traffic and non-real-time with burst time and length. This transmission rate-based priority creates low latency and high reliability so that traffic can be efficiently controlled when needed. Traffic control in this paper performs the service differentiation via traffic detection process, traffic notification process and traffic adjustment. The simulation results show that the proposed scheme achieves improved performance in delay rate, packet loss rate and throughput compared with those of other existing CCF and WCA.

• Electrical & Electronic Materials
• /
• v.9 no.3
• /
• pp.246-250
• /
• 1996

In optical soliton transmission systems with nonlinear dispersive materials, which is utilized for ultra-long and high bit rate transmission, it is shown that the value of initial time difference between adjacent solitons is analyzed for optimum bit rate. The method is inducted by uncorrelation condition with minimum interaction forces in initial covariance coefficient between adjacent solitons. When the initial time difference is 6 times of soliton pulse width by the results, it is shown that the reliability is maintained with more than 90% within transmission length of soliton period. multiplied by 93.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.11 no.11
• /
• pp.5360-5376
• /
• 2017

In this paper, we study the cross-layer design for the AMC/HARQ-based wireless networks, and propose a new dynamic transmission-mode selection scheme to improve system spectrum efficiency. In the proposed scheme, dynamic thresholds for transmission-mode selection in each packet transmission and retransmission are jointly designed under the constraint of the overall packet error rate. Comparing with the existing schemes, the proposed scheme is inclined to apply higher modulation order at the first several (re)transmissions, which corresponds to higher-rate transmission modes thus higher average system spectrum efficiency. We also extend the cross-layer design to MIMO (Multi-input Multi-output) communication scenarios. Numerical results show that the proposed new dynamic transmission-mode selection scheme generally achieves higher average spectrum efficiency than the conventional and existing cross-layer design.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.29 no.5A
• /
• pp.574-582
• /
• 2004

This paper shows the performance comparisons of several different rate scheduling schemes for non-real time data service over the uplink of burst switching-based direct sequencecode division multiple access (DS/CDMA) system to support the integrated voice/data service. The closed-form solution of optimal scheduling formulation, which minimizes average transmission delay when all of the active data users are transmitting simultaneously, is presented and mathematical analyses with other rate scheduling schemes, which provide efficiency criterion of transmission delay for rate scheduling schemes, are performed. Numerical results show the analyses explicitly.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.22 no.10
• /
• pp.1379-1385
• /
• 2018

In the conventional multi-user superposition transmission, the power allocation coefficients of data symbols and the received signal processing of users are determined by the condition of instantaneous channel powers. However, the use of instantaneous channel powers can increase the system complexity. Hence, we consider fixed multi-user superposition transmission using average channel powers. The fixed multi-user superposition transmission can reduce the system complexity because it uses the condition of average channel powers that slowly change over time in order to decide the power allocation coefficients and the received signal processing. In this paper, we analyze the average symbol error rate for the fixed multi-user superposition transmission. In particular, an expression for the average symbol error rate of M-ary Quadrature Amplitude Modulation is derived assuming Rayleigh fading channels. In addition, through the numerical results, we show that the conventional and fixed multi-user superposition transmissions achieve the similar average symbol error rate performances at the user in the severe channel condition.

• Journal of Electrical Engineering and Technology
• /
• v.6 no.6
• /
• pp.760-768
• /
• 2011

The performance of transmission lines and its shielding design during a lightning phenomenon are quite essential in the maintenance of a reliable power supply to consumers. The leader progression model, as an advanced approach, has been recently developed to calculate the shielding failure rate (SFR) of transmission lines using geometrical data and physical behavior of upward and downward lightning leaders. However, such method is quite time consuming. In the present paper, an effective method that utilizes artificial neural networks (ANNs) to create a metamodel for calculating the SFR of a transmission line based on shielding angle and height is introduced. The results of investigations on a real case study reveal that, through proper selection of an ANN structure and good training, the ANN prediction is very close to the result of the detailed simulation, whereas the Processing time is by far lower than that of the detailed model.