• Proceedings of the KIEE Conference
• /
• 2001.07a
• /
• pp.515-517
• /
• 2001

The efficient and rational transmission rate system is one of the crucial factors in creation of fair and competitive electricity market. Transmission charge can be largely categorized into the line usage charge, system reliability maintenance charge, access charge and others. Therefore, transmission rate structure should be able to reflect these cost components reasonably. This Paper suggests an approach that could be used for the reasonable calcuation of transmission reliability costs with reflection of line sensitivity and line outage rate.

• Proceedings of the IEEK Conference
• /
• 2000.07a
• /
• pp.113-116
• /
• 2000

Phase noise of oscillator gives the performance degradation significantly when a high carrier frequency and low transmission rate are used. The BER(Bit Error Rates) degradation of QPSK(Quadrature Phase Shift Keying) transmission is analyzed with the oscillator phase noise level specified in downstream physical interface of LMDS(Local Multipoint Distribution Services) which is described in DAVIC(Digital Audio Visual Council). The model used for the phase noise is a power-law model. We also investigated the effects of the various transmission rates on system performance. For the transmission rate below 0.5 Mbps, the BER performance is severely degraded and we verified that the transmission rate, 20 Mbps, is adequate for the downstream of LMDS systems.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.58 no.5
• /
• pp.911-917
• /
• 2009

This paper introduces a sequential clustering technique as a tool for an effective grouping of transmission systems. The interconnected network system retains information about the location of each line. With this information, this paper aims to carry out initial clustering through the transmission usage rate, compare the similarity measures of regional information with the similarity measures of location price, and introduce the techniques of the clustering method. This transmission usage rate uses power flow based on congestion costs and similarity measurements using the FCM(Fuzzy C-Mean) algorithm. This paper also aims to prove the propriety of the proposed clustering method by comparing it with existing clustering methods that use the similarity measurement system. The proposed algorithm is demonstrated through the IEEE 39-bus RTS and Korea power system.

• Journal of Korea Multimedia Society
• /
• v.9 no.3
• /
• pp.315-322
• /
• 2006

In the application rising IP multicast, the waste of available bandwidth occurs of reducing of transmission rate in non-congestion local caused by reducing of transmission rate in congestion local. In this paper, to solve such a problem, we propose a dynamic multicast method using IP multicast and overlay multicast. In proposed method, we elected a local representative for overlay multicasting. When the transmission rate of a group is less than transmission rate threshold, the representative can transmits duplicative packets. In simulation results, it was known that proposed method uses bandwidth more efficiently.

• International Journal of Advanced Culture Technology
• /
• v.6 no.4
• /
• pp.266-274
• /
• 2018

Securing field screens through LTE broadcasting is a very valuable technology in news production because of its locality and concurrency. TV has the advantage of being able to deliver news faster than newspapers and make live coverage on the scene of events and events. To maximize this, not only middle-end broadcasters but also existing broadcasting stations are taking an active role in broadcasting using LTE. However LTE broadcasting has yet to secure any conflicting values of broadcasting stability and securing high-definition. The key to solving this difficulty is the transmission rate of Bit Rate. This paper compares the Bit Rate transmission method, which is variable and fixed, to provide more on-site screens through LTE, and presents the Bit Rate adjustment method as a method of screen stabilization through experiment. Consequently, the most stable broadcast screen can be obtained when transmitting and connecting it to broadcasting in a variable 5M method.

• Journal of Internet Computing and Services
• /
• v.2 no.1
• /
• pp.87-96
• /
• 2001

This article proposes traffic dispersion with optical transmission technical and development of transmission rate for the safe multicast computer communication in the high bandwidth, Recently multicast traffic such as distance conference or Internet broadcast increases therefore the importance of traffic dispersion and transmission rate is emphasized. Ultimately this article offers the way of carrying out the above suggestion, First this paper points out traffic problems occurred in voice and text centered transmission. Next, transmission rate can be controlled by optical transmission technic to solve above difficulties in the multimedia and Internet. We investigated the feature and output on Add-Drop Mux/Demux and Also presented charges of length accord each stage in interference. We can show, the best data of design as a result of this experiment.

• Journal of the Korea Society of Computer and Information
• /
• v.10 no.4 s.36
• /
• pp.275-283
• /
• 2005

In this paper, we propose an overlay transmission method of end-to-end host to solve decrease in transmission rate caused by congestion in the application using multicast. In this proposed method, we've selected an overlay end-to-end host (OEH) for overcast transmission for each node, and the OEH can transmit duplicative packets. When the loss rate is more than the overcast threshold, the receivers of node in congestion are dropping from current layers and the OEH of lower nodes can request overcast transmission to OEH of non-congestion nodes for receiveing packets. In simulation results, it was known that the proposed method improves transmission rates over those of existing methods.

• Journal of Digital Contents Society
• /
• v.12 no.4
• /
• pp.485-490
• /
• 2011

Smoothing is a transmission plan where variable rate video data is converted to a constant bit rate stream. These smoothing algorithms include CBA, MCBA, MVBA, PCRTT and others. But, these algorithms build a transmission plan per frame unit. So, these algorithms cause frame burst or GOP burst. In order to improve it, MVBAG algorithm build a transmission plan per GOP. But this algorithm may not guarantee QoS when frame's size is abruptly larger or smaller than the computed transmission rate. In this paper, a smoothing algorithm is proposed to enhance MVBAG algorithm's problem. In order to show the proposed algorithm's performance, the proposed algorithm is compared with MVBAG algorithm using various evaluation factors such as number of frames that do not meet the QoS, average transmission rate variability per frame, average transmission rate variability per GOP. Experimental results show that the proposed algorithm outperforms MVBAG algorithm in number of frames that do not meet the QoS.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.37B no.9
• /
• pp.734-740
• /
• 2012

In this paper, we propose a method for throughput improvement in multirate multihop wireless networks with intra-session network coding. A multirate transmission supports several rates so that it has a tradeoff between transmission rate and transmission range, therefore multirate can cope with the performance degradation. We present the rate selection method with intra-session network coding in multirate nodes. The effective transmission rate is calculated by using intra-session network coding, and then its maximum effective transmission rate is selected. Concurrent transmission set is determined by selected transmission rate and then the linear programming is formulated for throughput calculation in multihop wireless networks. We evaluate the performance by using MATLAB and lp_solve programs in two topologies. It is shown that the throughput of the proposed method is improved.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.18 no.8
• /
• pp.1146-1158
• /
• 1993

In this paper, parallel scrambling techniques are considered for practical use in the SDH transmission and the ATM transmission. In the ATM transmission, there are two ways of transmitting ATM cells - the SDH-based and the cell-based - and the corresponding scrambling techniques differ accordingly. For the SDH transmission and the SDH-based ATM transmission, the FSS (frame synchronous scrambling) is applied to the STM frames : while for the cell-based ATM trans-mission, the DSS(distributed sample scrambling) is used on the ATM cell stream. The parallel scrambling techniques are examined for the FSS and the DSS, and applied to achieve the parallel FSSs for use in the SDH and the SDH-based ATM transmission along with the parallel DSS applicable to the cell-based ATM transmission. The resulting(8, 4) PSRG(parallel shift resister generator) and (8, 16) PSRG based parallel scramblings are directly applicable for the STM-1 rate processing of the STM-4 and STM-16 scramblings, respectively. Likewise, the resulting (1, 8)PSRG and double-sampling-double-correction based parallel scrambling techniques can be practically used for a low-rate processing of the SDH-based and the cell-based ATM signal scrambling respectively.